Rack Mount Modular Test System 50Ω ZTM Series DC to 18 GHz The Big Deal • • • • Customizable Front Panel Layout USB and Ethernet Control User-Friendly GUI and DLLs Included Fast Turnaround, Within 2 Weeks! Product Overview To simplify and accelerate the development and delivery of custom test solutions, Mini-Circuits developed the ZTM-series of modular test systems. The design consists of a 3U, 19-inch, rack-mountable chassis with six open hardware windows in the front panel, each of which may be outfitted with one of several component choices to meet your system requirements. This modular structure allows a wide variety of custom configurations with exceptionally fast turnaround times – within 2 weeks or less! ZTM units may be equipped with your choice of absorptive electromechanical SPDT, SP4T, SP6T, and transfer switches and programmable attenuators with 0 – 30, 60, 90, 110, and 120 dB attenuation range. With the use of Mini-Circuits’ low cost HandFlex™ interconnect cables, multiple matrix configurations can be easily created by the user. All models come with USB and Ethernet-TCP/IP (HTTP and Telnet protocols) control options, allowing setup flexibility and easy remote test management. All ZTM modular test systems come supplied with our user-friendly GUI software, API objects for Windows® environments, complete programming instructions for 32- and 64-bit Windows® and Linux® operating systems, user’s manual, and all accessories required for immediate use. Key Features Feature Advantages User Configurable Test System Flexible design allows you to specify the exact test system you need without the cost of unnecessary features. Fast Delivery Your custom test system will ship within 2 weeks of placing an order, accelerating your project completion time. Ethernet-TCP/IP-HTTP and Telnet Protocols (Supports DHCP and Static IP) ZTM Series test racks can be controlled from any Windows®, Mac®, or Linux® computer, or even a mobile device with a network connection and Ethernet-TCP/IP (HTTP or Telnet protocols) support. Using a VPN would allow remote control from anywhere in the world. USB HID (Human Interface Device) The ZTM Series can also be controlled via USB connection. Plug-and-Play, no driver required. Compatible with Windows® or Linux® operating systems using 32 and 64 bit architecture. AC Mains Power Supply Compatible with worldwide 110/240V AC power supplies, allowing easy, convenient setup. GUI software, DLLs, programming instructions, USB & Ethernet cables, Notesand power cord included The ZTM Series comes ready to use out of the box with all software, accessories, and instructions needed for immediate operation included. A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 5 Rack Mount Modular Test System 50Ω ZTM Series DC to 18 GHz Features • 6 customizable hardware windows, each of which can be equipped with your choice of: • Up to 2 SPDT mechanical switches (DC to 18 GHz) • Up to 2 mechanical transfer switches (DC to 18 GHz) • SP4T mechanical switch (DC to 18 GHz) • SP6T mechanical switch (DC to 12 GHz) • Up to 2 programmable attenuators (0 to 30, 60, 90, or 110 dB, 1 to 6000 MHz; or 0 – 120 dB, 1 – 4000 MHz) • Control via USB and Ethernet-TCP/IP (HTTP and Telnet protocols) • User-friendly GUI and DLLs included Model No. Description • Qualified to 100 million switch cycles ZTM Series Modular Test System • Easy maintenance Included Accessories • Delivery within 2 weeks from order or less! Applications • Automated production testing • RF signal path routing • Testing cellular systems • Simulation of transmission loss • Laboratory instrumentation • Control systems CBL-3W-US/EU USB-CBL-AB-7+ CBL-RJ45-MM-5+ HT-4-SMA Price Contact Sales Black 3-prong AC cord (US or EU) USB cable (6.8 ft.) RJ45 cable (5 ft.) SMA cable connector wrench Qty. (1) 1 1 1 1 RoHS Compliant See our web site for RoHS Compliance methodologies and qualifications Mini-Circuits ZTM Series GUI (Graphical User Interface) for USB/Ethernet Control • For Demo model of any Switch Matrix model select the model name from the drop box and click ‘Start Demo’ (See user guide for details for details) • For programming instructions fo the Switch Matrix see programming guide and AN-49-001 on Mini-Circuits’ website 1 Windows, Visual Basic, and Visual Studio are registered trademarks of Microsoft Corporation in the United States and other countries. Linux is a registered trademark of Linus Torvalds. LabVIEW and CVI are registered trademarks of National Instruments Corp. Delphi is a registered trademark of Codegear LLC. MATLAB is a registered trademark of MathWorks, Inc. Agilent VEE is a registered trademark of Agilent Technologies, Inc. Neither Mini-Circuits nor the Mini-Circuits USB-1SP4T-A18 are affiliated with or endorsed by the owners of the above referenced trademarks. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Rev. 3 ZTM-Series NY 150422 Page 2 of 5 ZTM Series Modular Test System Configuration The ZTM Series test platform contains 6 windows in the front panel. Each of the 6 windows can be populated with your choice of: • Up to 2 SPDT mechanical switches (DC to 18 GHz) • Up to 2 mechanical transfer switches (DC to 18 GHz) • SP4T mechanical switch (DC to 18 GHz) • SP6T mechanical switch (DC to 12 GHz) • Up to 2 programmable attenuators (0 to 30, 60, 90, or 110 dB, 1 to 6000 MHz; or 0 to 120 dB, 1 to 4000 MHz) You can specify your system in 3 easy steps using our simple online configuration tool at: www.minicircuits.com/ztm/ztm Step 1: Choose your configuration Step 2: Enter your contact details Step 3: We will be in touch within 24 hours! Alternatively, please contact us to discuss your requirements: Chi Man Shum Lee Whiting Phone: +1 201 647-1615 Phone: +44 1252 832 620 Email: [email protected]: [email protected] Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 5 ZTM Series Modular Test System Typical Electrical Specifications for Each Switch (at 0°C to 40°C)* Switch Type Model No. Frequency Range (GHz) Insertion Loss (dB) Isolation (dB) SPDT MSP2TA-18XL+ DC-18 0.2 85 SP4T MSP4TA-18+ DC-18 0.2 85 SP6T MSP6TA-12+ DC-12 0.2 90 Transfer MTS-18XL+ DC-18 0.2 85 Typical Electrical Specifications for Each Attenuator (at 0°C to 40°C)* Attenuation Range (dB) Model No. Frequency Range (MHz) Attenuation Resolution (dB) 0 - 30 RUDAT-6000-30 1 - 6000 0.25 0 - 60 RUDAT-6000-60 1 - 6000 0.25 0 - 90 RUDAT-6000-90 1 - 6000 0.25 0 - 110 RUDAT-6000-110 1 - 6000 0.25 0 - 120 RUDAT-4000-120 1 - 4000 0.25 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. *For a full statementmodel of the Standard Terms the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp See individual data sheets atand www.minicircuits.com Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 4 of 5 ZTM Series Modular Test System Minimum Software Requirements 1 Interface USB HID or HTTP Get/Post or Telnet Protocols Host operating system USB Control Window 32/64 Bit operating system: Windows 98 ®, Windows XP ®, Windows Vista ®, Windows 7®, Windows 8® Linux® support: 32/64 Bit operating system Host operating system Ethernet Control Any Windows, Mac, or Linux computer with a network port and Ethernet-TCP/IP (HTTP or Telnet protocols) support Hardware Pentium ® II or better1 Pentium is a registered trademark of Intel Corporation. Front Panel Outline Drawing Mechanical Specifications Case Material Aluminum to be protected from corrosion/rust External 2 handles on the front panel and rear safety block Weight 9.3 lbs (4.22 kg) (subject to configuration) Front panel SMA female for all RF connections LED position indicators for RF switch components Power ON/OFF switch with indicator light Rear panel 110/240V 50/60 Hz AC inlet USB type B connector for local control RJ45 LAN jack for Ethernet control Operating Temperature 0 to +45 deg C Control Interface USB or Ethernet TCP/IP supporting HTTP and TELNET protocols Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 5 of 5