RF-13 (Rev 02DEC14) SMA–J–P–H–RA–TH1 SMA–J–P–H–ST–TH1 SMA–J–P–H–ST–EM1 50Ω SMA JACKS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SMA-TH, www.samtec.com?SMA-SM, www.samtec.com?SMA-EM, www.samtec.com?SMA-MT or www.samtec.com?SMA-PN Contact Material: BeCu Shell Material: Brass Insulator Material: PTFE (-PN) Operating Temp Range: -65°C to +125°C Contact Resistance: Center Contact: 6mΩ max Outer Contact: 2mΩ max Insulator Resistance: 5,000 MΩ Impedance: 50Ω Dielectric Withstanding Voltage: 1,000 Vrms Frequency Range: 0~20 GHz (Cable dependent) Working Voltage: 335V RoHS Compliant: Yes Mates with: RF174, RF316, RF058, RF405, RF402, GRF1H-C, IJ5H, RF23S, BE25S Mates with a wide variety of cable assemblies Panel Mount, Edge Mount, Mixed Technology, Through-Hole or Surface Mount termination SMA TYPE GENDER Processing: Lead–Free Solderable: Yes –J = Jack PLATING –P –H = PCB Mount = 30µ" (0,76 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact –GF (15,10) .594 (7,00) .276 (6,33) .249 DIA (9,86) .388 (6,36) .250 (7,00) .276 –RA–SM1 (6,33) .249 DIA (15,10) .594 (6,35) .250 (9,55) .376 Note: While optimized for 50Ω applications, this connector can also perform well in certain 75Ω applications. Contact [email protected] for further information. = 10µ" (0,25 µm) Gold center contact, 3µ" (0,08 µm) Gold outer contact (–SM1 only) (11,60) .457 (13,50) .531 (7,95) .313 (10,55) .415 (11,60) .457 (13,80) .543 (10,30) .405 (3,94) .155 (1,27) .050 DIA –ST–TH1 (1,02) .040 (1,27) .050 DIA –ST–MT1 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (1,02) .040 –RA–TH1 SMA–J–P–H–ST–PN2 SMA–J–P–H–ST–PN4 SMA–J–P–H–ST–EM3 SMA SERIES Standard or Drop-in Edge Mount Performance up to 6 GHz 50Ω impedance 2-hole or 4-hole Panel Mount jacks TERMINATION ORIENTATION –ST –TH1 = Straight = Through-hole –RA –SM1 –PN2 = Surface Mount (–GF–RA only) = Right Angle (15,10) .594 (11,60) .457 (7,00) .276 –MT1 = Mixed Technology (–ST only) = 2-Hole Panel Mount (–ST only) –EM1 –PN4 = Edge Mount (–ST only) = 4-Hole Panel Mount (–ST only) –EM3 (12,46) .491 = Drop-in Edge Mount (–ST only) (8,96) .353 (2,60) .102 –RA–MT1 (12,22) .481 (6,35) .250 (2,59) .102 DIA (5,66) .223 (9,52) .375 –ST–EM1 (12,70) .500 (8,64) .340 (3,81) .150 (1,27) .050 DIA (6,33) .249 DIA (15,88) .625 (9,52) .375 (1,65) (9,52) .065 .375 (7,00) .276 (3,02) .119 (7,00) .276 (13,00) .512 –ST–EM3 (2,00) .079 (1,30) .051 DIA –ST–PN2 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –ST–PN4 (2,86) .113