RF-13 RFA6T–74SP3–74SP3–0300 RFA6T, RFB6T SERIES 75Ω OPTIMIZED BNC CABLE ASSEMBLIES SPECIFICATIONS 18 AWG 75Ω RG 6 coax cable, or 1694A Belden cable Mates with: BNC7T, DIN7A, HDBNC For complete specifications see www.samtec.com?RFA6T or www.samtec.com?RFB6T ALSO AVAILABLE RF Connector: Outer Contact Material: Ni plated Brass (BNC), Au plated BeCu (DIN), Au plated Phosphor Bronze (HDBNC) Center Contact Material: Gold plated Brass Insulator Material: PTFE Operating Temperature: -65°C to +125°C Impedance: 75Ω ± 3Ω (–ST ST) 75Ω ± 4Ω (–RA RA) Frequency Range: 0~3.5 GHz * Working Voltage: 500 Vrms max * Dielectric Withstanding: 1500 Vrms min * Contact Resistance: Center Contact: 1,5mΩ max Outer Contact: 0,4mΩ max RoHS Compliant: Yes (MOQ Required) THINK OUTSIDE THE CATALOG RG 6/1694A Cable: Impedance: 75Ω ±3Ω Capacitance: 54 ±3pF/meter Max Attenuation (cable only): 0.21dB @ 1GHz for 1 meter Conductor Size: 18 AWG, (1,02 mm) .040" dia. Conductor Material: Bare Copper Insulator Material: Gas Injected Foamed Polyethylene Shield Material: Tinned Copper Braid over Aluminum Foil Wrap Jacket Material: PVC Jacket Diameter: (7,00 mm) .275" Jacket Color: Black RoHS Compliant: Yes * See connector component pages for specific range. STRIPPED & TINNED (Dimensions in mm) CALLOUT A B C –303030 3.0 3.0 3.0 –303040 3.0 3.0 4.0 –403030 4.0 3.0 3.0 –403040 4.0 3.0 4.0 –404040 4.0 4.0 4.0 Both center conductor and braid shield are stripped, only the center conductor is tinned. • Additional stripping and tinning options • Additional plating options • Create a full system: cable assembly and board level mates, 50Ω and 75Ω solutions • 24-hour samples on standard products • Visit: rf.samtec.com Contact Samtec. OTHER SOLUTIONS 3G SDI optimized True 75Ω terminations END 1 CONNECTOR CABLE TYPE • Hand tool available. Contact [email protected] • Cable connector kits (see cable components catalog pages) END 2 CONNECTOR OVERALL LENGTH –“XXXX” Specify END OPTIONS from chart RFA6T = Overall Length in millimeters –0300 (300 mm) 11.81" minimum = RG 6 Cable RFB6T = Belden 1694A Cable XXXX = OAL (millimeters) –74SP3–78SP4 SHOWN END OPTIONS END OPTIONS –H4SP3 = 75Ω High Density BNC Straight Plug (10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell) –74RP3 = 75Ω BNC Right Angle Plug (10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell) –78SP4 = 75Ω DIN Straight Plug (10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell) –74SP3* = 75Ω BNC Straight Plug (10µ" (0,25 µm) Gold on Center Contact, Nickel on Shell) –SING = Single Ended (End 2 callout) –XXXXXX = Stripped & Tinned (End 2 callout) (See chart for callout) (*Die Cast also available = –D4SP3) WWW.SAMTEC.COM C B A