F-215 (Rev 01JUL15) ECUO–Y12–14–950–0–3–1–1–21 ECUO SERIES OPTICAL MICRO FLYOVER ASSEMBLY SPECIFICATIONSi For complete specifications see www.samtec.com?ECUO FEATURES • Easily upgrade from electrical to optical FireFly™ using the same connector system. • x12 Unidirectional or Bidirectional • 14 Gbps (28 Gbps in development) • Proven 850 nm VCSEL array technology • Multi-mode fiber technology • Power consumption Transmitter: 0.85 W Typ. Receiver: 0.90 W Typ. • Integral heat sink • 10˚ angled fiber exit from the housing to minimize keep-out zone on the board • Bend Radius: 7.5 mm for Fiber Type option -1 & -2 • Supports all data center and HPC protocols, including: Ethernet, InfiniBand™, Fibre Channel, PCIe®. Contact Samtec • Evaluation boards available REMOVAL TOOL • CAT-IN-ECUO-02 Contact Samtec. APPLICATION Multiple standard and custom heat sinks Rugged latching system ECUO WIDTH –U12 = x12 Tx to Rx Unidirectional Full Active Optical –T12 = x12 Tx Unidirectional Half Active Optical –R12 = x12 Rx Unidirectional Half Active Optical • x4 Bidirectional Contact Samtec. –Y12 = x12 Bidirectional Half Active Optical (Y Configuration) ELECTRICAL SOLUTIONS Note: FireFly™ products are dual sourced by Hirose Electric Co., LTD. 168 Gbps aggregate Rugged two-piece connector system with positive latching IN DESIGN • 38 AWG Eye Speed® micro coax cable • Performance to 28 Gbps • Easily upgrade to optical with same connector system See ECUE Series. Choice of fiber and active or passive end terminations Bidirectional and unidirectional solutions Mates with: UEC5, UCC8 DATA RATE CABLE LENGTH –14 = 14 Gbps (168 Gbps aggregate) –28 = 28 Gbps (In development) 0 Proven 850 nm VCSEL array technology HEAT SINK 1 FIBER TYPE –“XXX” –1 –1 = Overall Length in Centimeters (011 cm to 999 cm) (Minimum length will depend on fiber type and End 2 option specified.) = Flat = OM3 Low Bend Radius Ribbon Patents: 8588562, 8588561 Additional patents pending –2 = Pin-Fin –3 = Flat with 3-Ribbon passthrough –2 = OM3 Low Bend Radius Loose Tube Note: All FireFly™ designs, specifications and components are preliminary and subject to change without notice. CABLE LENGTH (10,80) .425 (5,76) .227 (16,00) .630 –1 FLAT HEAT SINK (7,40) .291 –3 FLAT HEAT SINK (with fiber groove for multi-row configuration) (12,95) .510 –01 (MTP MALE SHOWN) (17,56) .691 –06 (MT FEMALE SHOWN) –2 PIN-FIN HEAT SINK WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. END OPTION Leave blank –U12 –Y12 requires –2(X) options* –01 –21* = MTP 12F key down, male = MTP 24F key down, male –02 –22* = MTP 12F key down, female = MTP 24F key down, female –03 –23* = MPO 12F key down, male = MPO 24F key down, male –04 –24* = MPO 12F key down, female = MPO 24F key down, female –05 –25* = MT 12F male = MT 24F male –06 –26* = MT 12F female = MT 24F female