F-215 ZRDP–1–08–03.8–E1–1–1 ® (0,80 mm) .0315" ZRDP SERIES ULTRA LOW PROFILE CABLE ASSEMBLY SPECIFICATIONSi Mates with: ZCI, ZCC ® For complete specifications see www.samtec.com?ZRDP Cable: 34 AWG twinax ribbon cable Signal Routing: 100Ω Differential Cable Bending Radius: (3,18 mm) .125" min Plating: Au over 100µ" (2,54 µm) Ni Operating Temp Range: -25°C to +105°C Pinout Map: See web address above RoHS Compliant: Yes 8 or 16 pairs APPLICATION ZCC Ultra low profile ZRDP 34 AWG twinax ribbon cable ZCI Rugged metal housing ZRDP SIZE NO. OF PAIRS CABLE LENGTH END 2 WIRING OPTION –08 –1 = Fits ZCC-1-XX –2 = Fits ZCC-2-XX = Use for –1 size –16 = Use for –2 size –“XX.X” = Cable Length in Inches (97,0 mm) 03.8" minimum –Z1 = ZRDP (Wiring option –4 only) –E1 = ECDP with latches (Wiring option –1 only) OTHER MATES CABLE CONNECTOR ZRDP-1-08 ZRDP-2-16 HSEC8–13 HSEC8–25 OAL = Cable Length + (17,0) .67 N-1 –1 –1 = Pin A1 to Pin 1 = 100Ω –3 = Pin A1 to Pin N-1 –4 = Pin A1 to Pin AN –E2 = ECDP with latches (Wiring optio option 3 only) –3 NO. OF PAIRS –08 – –16 – A B (8,10) .319 (8, 3 9 (24,05) .947 94 (13,70) (13 70) .539 .5 (33,66) 1. 1.325 02 B A IMPEDANCE –Z1 (END END 1)) (20,88) .822 Notes: ot Cable able lengths longer longe than 40.00" 00" (1 meter) are not supported with S.I. test data. 01 –E1 (END 2) N (5,92) .233 Design your High Speed Cable with Samtec’s High Speed Cable Solutionator® at www.samtec.com/hdr WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. –E2 (END 2)