MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Features
Rev. V5
Functional Schematic
Attenuation: 1 dB Steps to 50 dB
Low DC Power Consumption
Small Footprint, JEDEC Package
Integral TTL Driver
50 ohm Impedance
Test Boards are Available
Tape and Reel Packaging Available
Lead-Free CSP-1 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT90-0106
Description
M/A-COM's MAAD-007082-000100 is a GaAs FET 6
-bit digital attenuator with integral TTL driver. Step
size is 1 dB providing a 50 dB total attenuation
range. This device is in a PQFN plastic surface
mount package. The MAAD-007082-000100 is
ideally suited for use where accuracy, fast speed,
very low power consumption and low costs are
required.
Pin Configuration1
Ordering Information
Part Number
Package
MAAD-007082-000100
Bulk Packaging
MAAD-007082-0001TR
1000 piece reel
MAAD-007082-0001TB
Sample Test Board
Note: Reference Application Note M513 for reel size
information.
1.
1
* Restrictions on Hazardous Substances, European Union Directive
2002/95/EC.
2.
Pin No.
Function
Pin No.
Function
1
C16
17
NC
2
C8
18
NC
3
C4
19
NC
4
C2
20
NC
5
C1
21
NC
6
C32
22
NC
7
GND
23
NC
8
NC
24
NC
9
NC
25
NC
2
10
NC
26
GND
11
GND
27
RF2
12
RF1
28
GND
13
GND
29
NC2
14
NC
30
-Vee
15
NC
31
NC
16
NC
32
+Vcc
The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
Pins 10 and 29 must be isolated.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
Electrical Specifications: TA = 25°C, Z0 = 50
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
—
DC - 2.4 GHz
dB
—
5.5
6.0
Attenuation Accuracy
Individual Bits 1-2-4-8-16-32 dB
Any Combination of Bits 1 to 50 dB
DC - 2.4 GHz
DC - 2.4 GHz
dB
dB
—
—
—
—
±(.3 +5% of atten setting)
±(.5 +8% of atten setting)
VSWR
Full Range
DC - 2.4 GHz
Ratio
—
1.8:1
2:1
Switching Speed
50% Cntl to 90%/10% RF
10% to 90% or 90% to 10%
—
—
ns
ns
—
—
75
20
150
50
1 dB Compression
—
—
50 MHz
0.5 - 2.40 GHz
dBm
dBm
—
—
+21
+24
—
—
Input IP3
Two-tone inputs up to +5 dBm
50 MHz
0.5-2.4 GHz
dB
dB
—
—
+35
+48
—
—
+Vcc
-Vee
—
—
—
—
V
V
4.75
-8.0
5.0
-5.0
5.25
-4.75
Logic “0”
Sink Current is 20 µA max.
—
V
0.0
—
0.8
Logic “1”
Source Current is 20 µA max.
—
V
2.0
—
5.0
VIL
VIH
LOW-level input voltage
HIGH-level input voltage
—
—
V
V
0.0
2.0
—
—
0.8
5.0
lin (Input Leakage Current)
Vin = VCC or GND
—
uA
-1.0
—
1.0
Icc
(Quiescent Supply Current)
Vcntrl = VCC or GND
—
uA
—
250
400
ΔIcc3
(Additional Supply Current
Per TTL Input Pin)
VCC = Max, Vcntrl = VCC - 2.1 V
—
mA
—
—
1.0
IEE
VEE min to max, Vin = VIL or VIH
—
mA
-1.0
-0.2
—
Thermal Resistance θjc
—
—
°C/W
—
15
—
Absolute Maximum Ratings 3,4
Parameter
Absolute Maximum
Max. Input Power
0.05 GHz
0.5 - 2.4 GHz
+27 dBm
+34 dBm
VCC
Truth Table
C32
C16
C8
C4
C2
C1
Attenuation
0
0
0
0
0
0
Loss, Reference
0
0
0
0
0
1
1.0 dB
-0.5V ≤ VCC ≤ +7.0V
0
0
0
0
1
0
2.0 dB
VEE
-8.5V ≤ VEE ≤ +0.5V
0
0
0
1
0
0
4.0 dB
VCC - VEE
-0.5V ≤ VCC - VEE ≤ 14.5V
0
0
1
0
0
0
8.0 dB
5
Vin
-0.5V ≤ Vin ≤ VCC + 0.5V
0
1
0
0
0
0
16.0 dB
Operating Temperature
-40ºC to +85ºC
1
0
0
0
0
0
32.0 dB
Storage Temperature
-65ºC to +125ºC
1
1
0
0
1
0
50.0 dB
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. MACOM does not recommend sustained operation near these
survivability limits.
5. Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
0 = TTL Low; 1 = TTL High
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
Recommended PCB Configuration6
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Moisture Sensitivity
The MSL rating for this part is defined as Level 2
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 2 parts.
6.
Application Note C2083 is available at www.macom.com
Typical Performance Curves
Insertion Loss
VSWR @ Insertion Loss
2.2
1.9
5.0
VSWR
Loss (dB)
Out p ut
Inp ut
6.0
4.0
1.6
1.3
1.0
3.0
0
400
800
1200
1600
Fre que ncy (MHz )
2000
2400
0
400
800
1200
1600
2000
Frequency (MHz)
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2400
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
Typical Performance Curves
Attenuation Error, 2 dB Bit
Attenuation Error, 1 dB Bit
0.2
Attenuation Error (dB)
Attenuation Error (dB)
0.2
0.1
0.0
-0.1
0.1
0.0
-0.2
0
400
800
1200
1600
2000
-0.1
2400
0
400
Frequency (MHz)
Attenuation Error (dB)
Attenuation Error (dB)
0.3
0.2
0.1
0.0
2400
0.3
0.2
0.1
0.0
-0.1
-0.2
0
1200
1600
2000
400
2400
800
1200
1600
2000
2400
Frequency (MHz)
Frequency (MHz)
Attenuation Error, 32 dB Bit
Attenuation Error, 16 dB Bit
1.0
1.0
Attenuation Error (dB)
Attenuation Error (dB)
2000
0.4
-0.1
800
1600
Attenuation Error, 8 dB Bit
0.4
400
1200
Frequency (MHz)
Attenuation Error, 4 dB Bit
0
800
0.6
0.2
-0.2
-0.6
0.6
0.2
-0.2
-0.6
0
400
800
1200
1600
Fre que ncy (MHz )
2000
2400
0
400
800
1200
1600
2000
Frequency (MHz)
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2400
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
Typical Performance Curves
VSWR, 1 dB Bit
Attenuation Error, Max. Attenuation
Out p ut
1.6
0.5
VSWR
Attenuation Error (dB)
Inp ut
1.8
2.5
-1.5
1.4
1.2
-3.5
1.0
0
400
800
1200
1600
2000
2400
0
400
800
Frequency (MHz)
1200
1600
2000
2400
Frequency (MHz)
VSWR, 2 dB Bit
VSWR, 4 dB Bit
Inp ut
Out put
I nput
1.8
Out p ut
1.8
VSWR
1.6
VSWR
1.6
1.4
1.4
1.2
1.2
1.0
0
400
800
1.0
0
400
800
1200
1600
2000
1200
1600
2000
2400
Frequency (MHz)
2400
Fre que ncy (MHz )
VSWR, 8 dB Bit
VSWR, 16 dB Bit
Inp ut
Out p ut
1.8
I np ut
O ut p ut
1.6
1.4
1.4
VSWR
VSWR
1.6
1.2
1.2
1.0
0
400
800
1200
1600
Frequency (MHz)
5
2000
2400
1.0
0
400
800
1200
1600
2000
2400
Fre que ncy (MHz )
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
Typical Performance Curves
VSWR, Maximum Attenuation
VSWR, 32 dB Bit
Inp ut
Out p ut
1.60
Inp ut
Out p ut
1.6
VSWR
VSWR
1.40
1.20
1.4
1.2
1.00
0
400
800
1200
1600
2000
1.0
2400
0
Fre que ncy (MHz )
400
800
1200
1600
2000
2400
Frequency (MHz)
Maximum IP3 over Temperature Range and
Attenuation @ 50 MHz
Maximum IP3 over Temperature Range and
Attenuation @ 950 MHz
50
40
40
IP3
IP3
50
30
30
20
Loss
1
2
4
8
16
32
50
Attenuation (dB)
20
Loss
1
2
4
8
16
32
Attenuation (dB)
Maximum IP3 over Temperature Range and
Attenuation @ 1900 MHz
50
IP3
40
30
20
Loss
1
2
4
8
16
32
50
Attenuation (dB)
6
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
50
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
CSP-1, Lead-Free 4 x 6 mm, 32-lead PQFN†
†
Reference Application Note M538 for lead-free solder reflow recommendations.
7
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MAAD-007082
Digital Attenuator
50 dB, 6-Bit, TTL Driver, DC - 2.4 GHz
Rev. V5
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
8
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support