TQ Series Switching solenoid valve FEATURES · 2-way or 3-way, 2 position valve (NO, NC & Distributor) · Meets performance characteristics for a minimum of 25 million cycles · Cost-effective, unique PBT body · Manifold mount design or molded barbed fittings to fit a range of needs · PRO services MEDIA COMPATIBILITY PHYSICAL PROPERTIES Non-corrosive gases Operating environment Storage temperature 0 to 70 °C -40 to 70 °C WETTED MATERIALS Length 43.9 mm (1.73 in) Width 15.9 mm (0.625 in) Stem base: 360 HO2 brass Height 17 mm (0.67 in) All others: FKM; 430 FR series stainless steel (passivated); 302 series stainless steel; Loctite® 290 Porting Barb fittings for 1/8 in I.D. tubing or manifold mount Weight 34 g (1.2 oz) Body: PBT (Polybutylene Terephthalate) ELECTRICAL Power Voltage 0.016 cm3 (nominal) Internal volume 0.5, 1.0 or 2.0 W 5, 12, 24 VDC ± 10% Filtration (recommended) Lubrication 40 µm None required Loctite® is a registered trademark of Henkel Consumer Adhesives, Inc. E / 11747 / A 1/4 www.first-sensor.com www.sensortechnics.com TQ Series Switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. TQ...P100... Pressure Vacuum Orifice siz es/ Equivalent CV1 0...100 psig TQ...P050... 0...50 psig TQ...P025... 0...25 psig TQ...P030... 0...30 psig TQ...P015... 0...15 psig TQ...P006... 0...6 psig P o w er Leak rate2 R esp o n se ≤0.2 sccm <30 msec cycling 2W 0.030" (0.762 mm)/ 0.017 CV 1W 0.5 W 0...27 "Hg (0...13 psi) 2W 0.050" (1.270 mm)/ 0.035 CV 1W 0.5 W FLOW CURVES (typical air flow)3 Notes: 1. The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2. sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3. slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. E / 11747 / A 2/4 www.first-sensor.com www.sensortechnics.com TQ Series Switching solenoid valve VALVE TYPE 2 way NC 3 way NC or distributor 3 way NO E / 11747 / A 3/4 www.first-sensor.com www.sensortechnics.com TQ Series Switching solenoid valve ELECTRICAL CONNECTION TQ...P... (PC mount, 4 PC pins) TQ...F... (Wire leads, no terminals) PNEUMATIC CONNECTION - BODY TQ...0... (Manifold mount) TQ...8... (1/8" I.D. tubing) PNEUMATIC CONNECTION - STEM TQ...0 (Top seat, plugged) TQ...8 (0.125" top seat, 1/8" I.D. tubing) ORDERING INFORMATION Series Ways TQ 2 2 way P 0 0 6 6 p si C* NC 3 3 way P 0 1 5 1 5 p si P Options Pressure Function Elastomer Voltage V Viton (FKM) 05 NO 5 VDC Pneumatic connection B ody Stem F Wire leads 0 no barbs 0 none Electrical 12 12 VDC P PC board mount 24 24 V D C P 0 2 5 2 5 p si 8 1/8" barbs 8 8 8 1/8" barbs P 0 3 0 3 0 p si P 0 5 0 5 0 p si P 1 0 0 1 0 0 p si * 3 way NC version can also be used as distributor Example: TQ 3 P 030 C V 12 P Note: Not all combinations might be available. Please contact First Sensor. PRO services: · Extended warranty period of 2 years · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11747 / A 4/4 www.first-sensor.com www.sensortechnics.com