TE Series PC mount switching solenoid valve FEATURES · 2-way or 3-way, 2 position valve (NO, NC & Distributor) · Offer a discrete valve design with up to 260 million life cycle rating · Available in manifold mounting · Provide a range of electrical coil options, including PC mountable, spade lugs, or wire leads · Powerful enough for a range of uses that require high flow · RoHS compliant · PRO services MEDIA COMPATIBILITY PHYSICAL PROPERTIES Air, argon, helium, hydrogen, methane, nitrogen, oxygen & other non-reacting gasses Operating environment Storage temperature 0 to 70 °C -40 to 70 °C WETTED MATERIALS Length 43.9 mm (1.73 in) Body: 36000 HO2 brass; Width 15.9 mm (0.625 in) Height 17 mm (0.67 in) Porting 10-32 tapped ports, 1/16, 5/64 or 1/8 in stem barbs Weight 60 g (2.1 oz) Stem base: 36000 HO2 brass; Plunger options: FKM; EPDM All others: 430 FR series stainless steel (passivated); 302 series stainless steel Power Voltage E / 11746 / B 0.026 in3 (without fittings) Internal volume ELECTRICAL 0.5, 1.0 or 2.0 W 5, 12, 24 VDC ± 10% Filtration (recommended) Lubrication 40 µm None required 1/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. Pressure TE...P100...030... 0...100 psig TE...P050...030... 0...50 psig TE...P025...030... 0...25 psig TE...P070...050... 0...70 psig TE...P025...050... 0...25 psig TE...P050...050... 0...50 psig TE...P010...050... 0...10 psig TE...P025...102... 0...25 psig Vacuum Orifice siz es/ Equivalent CV1 Leak rate (air)2 R esp o n se 0.030 in (0.76 mm)/ 0.017 CV 0...27 in Hg (0...13 psi) 0.050 in (1.27 mm)/ 0.025 CV 0.050 in (1.27 mm)/ 0.031 CV 0.050 in (1.27 mm)/ 0.021 CV 0.102 in (2.59 mm)/ 0.069 CV <0.016 sccm (bubble tight) <0.1sccm <30 msec cycling Life cycles (millions)4 100 20 200 40 260 60 20 16 200 40 100 20 260 60 (FKM) (EPDM) (FKM) (EPDM) (FKM) (EPDM) (FKM) (EPDM) (FKM) (EPDM) (FKM) (EPDM) (FKM) (EPDM) 25 (FKM) FLOW CURVE (typical air flow, 24 °C)3 Notes: 1. The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2. sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3. slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. 4. Life is dependent upon elastomeric material, duty cycle and pressure. E / 11746 / B 2/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve VALVE TYPE 2 way NC 2 way NO 3 way NC or distributor 3 way NO E / 11746 / B 3/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve OUTLINE DRAWING 2 way valves dimensions in inches (mm) 3 way valves dimensions in inches (mm) Manifold mount diagram dimensions in inches (mm) E / 11746 / B 4/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve COIL STYLES - ELECTRICAL CONNECTIONS TE...F... (Wire leads, no terminals) TE...Q... (Quick connect spade) dimensions in inches (mm) TE...S... (PC mount, 2 solder pads) TE...P...* (PC mount, 4 PC pins) dimensions in inches (mm) * 4 PC pin PCB interface dimensions in inches (mm) E / 11746 / B 5/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve BODY STYLES - PNEUMATIC CONNECTIONS TE...7... (5/64" I.D. tubing) TE...6... (1/16" I.D. tubing) TE...8... (1/8" I.D. tubing, 1/4" O.D. max.) STEM STYLES - PNEUMATIC CONNECTIONS TE...0 (Type 1 top seat, plugged) E / 11746 / B TE...6 (0.062" top seat, 1/16" I.D. tubing) TE...7 (0.078" top seat, 5/64" I.D. tubing) TE...8 (0.125" top seat, 1/8" I.D. tubing, 1/4" O.D. max.) 6/7 www.first-sensor.com www.sensortechnics.com TE Series PC mount switching solenoid valve ORDERING INFORMATION Series TE Ways Pressure Function Orifice Elastomer Voltage 2 2 way P010* 10 psi C* NC 030 0.030" V FK M 05 3 3 way P025 P 050 0.050" E EPD M 12 12 V D C P 2 5 p si P050** 50 psi P 070* NO 102* 0.102" 5 VDC F 24 24 V D C Q 7 0 p si Pneumatic B ody Wire 0 Manifold leads mount PC board 6** 1/16" mount barbs Quick 7 5/64" connect barbs Solder 8 1/8" taps barbs Electrical S connection Stem 0* None 6** 1/16" barbs 7 5/64" barbs 8 1/8" barbs P100*** 100 psi * only with 0.050" orifice ** only with 0.030" and 0.050" orifice *** only with 0.030" orifice Example TE 2 P 050 * 3 way NC * only available version can as 2-way NC, also be used FKM, manifold as distributor mount body C 030 * 2 way NC only ** 1/16" barbs not available for 0.050" orifice V 05 P 8 8 Note: Not all combinations might be available. Please contact First Sensor. Accessories (please order separately using the following order numbers) Order No. 190-007024-002 Description O-ring, FKM (used as a seal between the manifold and valve body) PRO services: · Extended warranty period of 2 years · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11746 / B 7/7 www.first-sensor.com www.sensortechnics.com