IC - SO Interface Module Selection Guide Talema manufactures a wide range of signal transformers for all S O ISDN applications. Space saving modules, available in through hole and surface mount packages, offer a cost effective alternative to individual transformers and chokes and are compatible with all common IC’s. A complete listing of transceiver IC’s with recommended Talema transformer modules is listed on the following cross reference chart. Performance has been proven in the many design-in’s of our products in these applications. Quality and consistency is guaranteed through 100% testing of the specified parameters for Primary Inductance, Leakage Inductance, Turns Ratio, DC resistance and Interwinding Capacitance. This ensures that the Return Loss and Pulse Waveshape requirements for S-Interface can be met. Additionally, all parts are tested for 1500V minimum isolation. Standard Packaging: SMD styles - Tape and Reel; TH styles - Anti Static tubes. ISDN IC - SO Interface Module Cross Reference Guide Talema Part Number IC Manufacturer IC Part Number Vertical Mount DIL Surface Mount IEC 950 Approved Standard IEC 950 Reinforced Insulation Standard/ Compact Miniature Alcatel Micro MTC20276, MTC20277, MTC202172 HVM-120A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Cologne Chip HFC-Sxxx Series HVM140C1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Legerity (AMD) AM79C30A, AM79C32A HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A T7234, T7250, T7254, T7256, T7259 HVM-130C1 ISM-130C1 MHJ-230B1 MSJ-405A MAJ-405A MUJ-105A T7901, T7903 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Mietec MTC-2072 HVM-120A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Mitel MT8930, MT8931 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A MC145474, MC145475 HVM-100C1 ISM-100C1 MHJ-200B1 MSJ-400A MAJ-400A MUJ-100A MC145574 HVM-130C1 ISM-130C1 MHJ-230B1 MSJ-405A MAJ-405A MUJ-105A National TP3420, TP3421 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A NEC D 98201 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A SGS ST5420, ST5421 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A P E B 2080, 2082, 2084, 2085, 2086 PSB2115, PSB2116 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A P E B 8090, 8091, 8190, 8191 PEB21381(5V), PEB21383(5V) HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A PSB21381(3.3V), PSB21382, PSB21384 PSB21283(3.3V), PEB3086, PSB31864 HVM-100C1 ISM-100C1 MHJ-200B1 MSJ-400A MAJ-400A MUJ-100A V LS I VNS8000 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Yahama YN7405 HVM-201A1 HVM-140C1 ISM-120A1 ISM-140C1 MHJ-240B1 MSJ-403A MAJ-403A MUJ-103A Lucent Motorola Infineon Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (10-07)Communications\So Module ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Miniature Chip SMD Modules comply w ith Basic Insulation Level EN60950, UL1950 and UL1459 LP Turns LL CC RCUP RCUS VP (mH Min) Ratio (μH Max) (pF Max) (Ohms) (Ohms) (Vrms) MUJ-100A or B-XXX MUJ-103A or B-XXX 25 25 1:1:1: 1 1:1:2: 2 5 5 50 50 2.7 3.7 3.3 8.4 1500 1500 A or B A or B MUJ-105A or B-XXX 25 1:1:2.5: 2.5 5 50 5.2 10.5 1500 A or B Basic P/N + Suffix RCU (Ohms) Part Number Schematic C o mmo n Mo d e C h o k e Basic P/N + Suffix MUJ-100A-000 MUJ-100A or B-500 MUJ-100A or B-101 MUJ-100A or B-501 MUJ-100A or B-502 RCU (Ohms) LN (μH) No Choke 50 100 500 5000 RCU (Ohms) Basic P/N + Suffix MUJ-103A -000 MUJ-103A or B-500 MUJ-103A or B-101 MUJ-103A or B-501 MUJ-103A or B-502 0.4 0.5 0.4 0.8 No Choke 0.5 0.6 0.6 0.9 MUJ-105A-000 MUJ-105A or B-500 MUJ-105A or B-101 MUJ-105A or B-501 MUJ-105A or B-502 No Choke 0.7 0.9 0.8 1.5 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Schematic Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series (Without Choke) A Standard Packaging: Tape and Reel 1 MUJ Miniature Module Suggested Pad Layout 0.077 (1.96) TALEMA IN WK/YR Part Number 0.350 (8.89) 0.504 (12.80) 0.236 (6.00) 0.189 (4.80) 0° - 8° 0.378 0.346 (9.60) (8.80) 0.031 (0.80) 0.050 (1.27) 0.394 (10.60) 0.350 (8.89) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise 15 14 4 13 5 12 6 7 11 10 8 9 B A 1 Surface Coplanarity will be 0.004 (0.10) 16 2 3 Schematics - With Choke 0.079 (2.00) Pins: 0.016x0.016 (0.40 x 0.40) IC Line Line IC Line IC 16 5 2 3 15 14 12 4 13 4 5 12 3 6 7 11 10 13 8 9 6 7 10 9 8 1 11 15 16 2 THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications 14 ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Miniature Chip SMD Modules comply w ith Basic Insulation Level EN60950, UL1950 and UL1459 LP Turns LL CC RCUP RCUS VP (mH Min) Ratio (μH Max) (pF Max) (Ohms) (Ohms) (Vrms) MMJ-100A or B-XXX MMJ-103A or B-XXX 25 25 1:1:1: 1 1:1:2: 2 5 5 50 50 2.7 3.7 3.3 8.4 1500 1500 A or B A or B MMJ-105A or B-XXX 25 1:1:2.5: 2.5 5 50 5.2 10.5 1500 A or B Basic P/N + Suffix RCU (Ohms) Part Number Schematic Common Mode Choke Basic P/N + Suffix MMJ-100A-000 MMJ-100A or B-500 MMJ-100A or B-101 MMJ-100A or B-501 MMJ-100A or B-502 RCU (Ohms) LN (μH) No Choke 50 100 500 5000 RCU (Ohms) Basic P/N + Suffix MMJ-103A -000 MMJ-103A or B-500 MMJ-103A or B-101 MMJ-103A or B-501 MMJ-103A or B-502 0.4 0.5 0.4 0.8 No Choke 0.5 0.6 0.6 0.9 MMJ-105A-000 MMJ-105A or B-500 MMJ-105A or B-101 MMJ-105A or B-501 MMJ-105A or B-502 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 25mH minimum, line side windings in series @ 10kHz, 100mV Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mV Coupling capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series No Choke 0.7 0.9 0.8 1.5 Schematic (Without Choke) Standard Packaging: Tape and Reel A 1 MMJ Miniature Module 0.346 (8.80) 0.051 (1.31) 0.350 (8.89) 0.453 (11.50) 0.256 (6.50) 16 Suggested Pad Layout 2 3 15 14 0.030 (0.75) 4 13 5 12 6 7 11 10 8 9 0.050 (1.27) TALEMA IN WK/YR Part Number 0° - 8° 0.378 (9.60) IC Line 0.394 (10.60) 0.079 (2.00) Schematics - With Choke 0.350 (8.89) 1 0.216 (5.50) Pins: 0.016 x 0.016 (0.40 x 0.40) Surface Coplanarity will be 0.004 (0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise B A Line IC Line IC 10 16 5 2 3 15 14 12 9 4 13 4 11 5 12 3 6 7 11 10 13 9 6 8 7 8 1 15 16 2 14 Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374-954 8666 • Czech Rep: Int.+420 37 - 744 9303 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com ISDN SO Compact SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Compact SMD Modules comply with Basic Insulation Level EN60950, UL1950 and UL1459 Part Number LP (mH Min) Turns Ratio LL (μH Max) ^IDC (mA) CC (pF Max) RCUP (Ohms) RCUS (Ohms) VP (Vrms) Schematic 30 30 30 30 30 30 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 5 5 5 5 5 5 4 4 4 3 3 3 120 120 120 120 120 120 1.7 1.7 1.9 1.7 1.7 1.9 1.7 3.4 4.4 1.7 3.4 4.4 1500 1500 1500 1500 1500 1500 A A A A A A MAJ-400A-XXX MAJ-403A-XXX MAJ-405A-XXX MAJ-400A-XXX-3 MAJ-403A-XXX-3 MAJ-405A-XXX-3 C o mmo n Mo d e C h o k e Basic P/N + Suffix (Example: MAJ-403A-470 -000 -470 -101 -501 -502 RCU (Ohms) LN (μH) No Choke 47 0.5 100 0.7 500 0.5 5000 2.0 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 30mH minimum, line side windings in series @ 10kHz,100mV Leakage Inductance: Line side windings in series, IC side windings short circuited @ 100kHz, 100mV Coupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series Standard Packaging: Tape and Reel MAJ Compact Chip Module 0.551 0.472 (14.00) (13.00) Suggested Pad Layout TALEMA IN WK/YR Part Number 0.100 (2.54) Schematic A 0.047 (1.20) 0.044 (1.11) 7 x 0.100 (2,54) 0.787 (20.00) 0° - 8° 1 0.591 0.374 (15.00) (9.50) 0.700 (17.78) 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) Line IC 16 2 3 15 14 4 13 5 12 6 7 11 10 8 9 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com ISDN SO Miniature SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Compact SMD Modules comply with Basic Insulation Level EN60950, UL1950 and UL1459 Part Number MSJ-400A-XXX MSJ-403A-XXX MSJ-405A-XXX LP (mH Min) Turns Ratio LL (μH Max) ^IDC (mA) CC (pF Max) RCUP (Ohms) RCUS (Ohms) VP (Vrms) Schematic 30 30 30 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 10 10 10 4 4 4 150 150 150 1.7 1.7 1.7 2.0 4.0 4.6 1500 1500 1500 A A A C o mmo n Mo d e C h o k e Basic P/N + Suffix (Example: MSJ-403A-470 -000 -470 -101 -501 -502 RCU (Ohms) LN (μH) No Choke 47 0.5 100 0.7 500 0.5 5000 2.0 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 30mH minimum, line side windings in series @ 10kHz,100mV Leakage Inductance: Line side windings in series, IC side windings short circuited @ 100kHz, 100mV Coupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series Standard Packaging: Tape and Reel MSJ Module 0.591 0.535 (15.00) (13.60) Suggested Pad Layout TALEMA IN WK/YR Part Number 0.100 (2.54) Schematic A 0.047 (1.20) 1 0.122 (3.11) 0° - 8° 7 x 0.100 (2.54) 0.945 (24.00) 0.354 0.307 (9.00) (7.80) 0.630 0.394 (16.00) (10.00) 0.700 (17.78) 0.020 x 0.12 (0.50 x 0.30) Line IC 16 2 3 15 14 4 13 5 12 6 7 11 10 8 9 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications MHJ Series SO 3kV Interface Transformer Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings 3 k V M o d u le s c o m p ly w it h R e in f o r c e d In s u la t io n L e v e l E N 6 0 9 5 0 Part Number MHJ-200B1-XXX MHJ-240B1-XXX MHJ-230B1-XXX LP (mH Min) Turns Ratio ± 1% LL (μH Max) ^IDC (mA) CC (pF Max) RCUP (Ohms) RCUS (Ohms) VP (Vrms) Schematic 30 30 30 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 10 10 10 4 4 4 75 75 75 1.7 1.7 1.7 1.9 3.7 4.4 3000 3000 3000 A A A C o m m o n Mo d e Qu a d C h o k e Basic P/N + Suffix (Example: MHJ-240B1-502 -000 -470 -101 -501 -502 -123 RCU (Ohms) LN (μH) SO Transformer modules comply with Reinforced Insulation Level EN60950:1992/A4: 1997, para. 2.9.4.4 when tested in accordance with 6.4.1 No Choke 47 0.4 100 0.6 500 0.4 5000 1.1 12000 1.8 Test Conditions: 1. Polarity and Turns Ratio: w1 : w2 : w3 : w4 ±1% 2. Inductance: 30mH Minimum, line side windings (w3+w4) in series @ 10kHz, 100mV 3. Leakage Inductance: 10μH Max. @ 100kHz, 100mV 4. Quad Choke Inductance: 100kHz, 20mV 5. Winding Capacitance: CW 150pF Max. (w3+w4) 6. Coupling Capacitance: CC 75pF Max. (w3+w4 to w1+w2) @ 10kHz, 100mV 7. High Voltage Test: 3kV, 1 minute U(w3+w4 to w1+w2) High Voltage Pulse Test: UPULSE (w3+w4 to w1+w2); 10kVOP for 1,2μs/50μs wave form UPULSE (w3+w4 to w1+w2); 10kVOP for 10μs/700μs wave form MHJ Module Schematic Suggested Pad Layout 0.122 (3.11) 0.100 (2.54) TALEMA IN WK/YR Part Number 0.020 (0.50) 7 x 0.100 (2,54) 0.945 (24.00) A 0.059 (1.50) Line IC 1 0° - 8° 0.717 0.630 (18.2) (16.0) 0.394 0.346 (10.0) (8.8) Pins - 0.012 x 0.020 (0.3 x 0.5) Surface Coplanarity will be 0.004(0.10) maximum 0.756 (19.2) 2 3 0.520 (13.2) 4 W3 W1 W4 W2 W3 W1 W4 W2 5 0.700 (17.78) 6 7 8 16 15 14 13 12 11 10 9 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com ISDN SO THT Interface Modules Features • excellent output characteristics ensures compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • HMV Series approved to IEC950 (see note at bottom of chart) • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings ISM Series DIL Modules comply with Supplementary Insulation Level EN60950, UL1950 and UL1459 LP Turns LL ^IDC CC RCUP RCUS VP (mH Min) Ratio (μH Max) (mA) (pF Max) (Ohms) (Ohms) (Vrms) ISM-100C1-XXX 30 1/1:1/1 10 5 150 1.7 2.0 1500 ISM-120A1-XXX 30 1/1:4 10 5 150 1.7 4.0 1500 A1 ISM-130C1-XXX 30 1/1:2.5/2.5 10 5 150 1.7 4.6 1500 C1 ISM-140C1-XXX 30 1/1:2/2 10 5 150 1.7 4.0 1500 C1 Part Number Schematic C1 HVM Series DIL Modules are Approved to IEC950 - Supplementry Insulation Level HVM-100C1-502 30 1/1:1/1 10 5 75 1.7 2.1 1500 HVM-120A1-502 30 1/1:4 10 5 75 1.7 4.2 1500 A1 HVM-130C1-502 30 1/1:2.5/2.5 10 5 75 1.7 4.9 1500 C1 HVM-140C1-502 30 1/1:2/2 10 5 75 1.7 4.2 1500 C1 Common Mode Quad Choke -470 47 0.30 Note: The HVM Series with a 5mH quad choke is approved to IEC950 Supplementary Insulation level for connection between SELV and TNV in systems which have a rated mains supply of 250Vrms to earth (Certificate Nr. NL2731). Other choke inductances also available. -101 100 0.40 -501 500 1.20 Standard Packaging: Anti-static tubes -502 5000 1.00 Basic P/N + Suffix (Example: ISM-100C1-470) LN (μH) -000 RCU (Ohms) No Choke Schematic ISM & HVM THT Modules A1 Line 0.020 x 0.020 (0,52 x 0,52) 9 1 IC 2 18 10 9 3 10 17 5 8 x 0.100 (2,54) 1.142 (29.00) C1 4 8 16 14 11 15 1 18 Line 0.350 (8.89) 0.413 (10,50) 0.059 (1.50) 0.594 (15.10) 1 0.138 ±0.020 (3,50 ±0,50) 18 5 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise C1 2 IC 3 9 8 7 16 10 11 12 17 4 14 15 THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications