IC Chipsets - UPO Interface Transformer Selection Guide IC Manufacturer IC Part Number Talema Part Number Transformer Mounting Style C h o ke ^IDC (mA) LP (mH) LL (µH) CC (pF) Vrms LN (mH) 1:1: 2.5 75 1.7 6 100 2500 -- Turns Ratio Single TH & SMD Interface Transformers UF-130A AMD AM2095 & AM20950 PEB2095 IBS Infineon P E B 20590 & P E B 20591 PEB20590VIP/PEB20591VIP-8 P S B 2196 & P S B 2197 National TP34 & TP3406 THT UV-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UMJ-192S SMD 1:1:1.25: 1.25 75 1.7 10 140 1500 -- UHF-230B THT 1:1: 2.5 100 1.7 20 20 3000 -- UF-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UV-130A THT 1:1: 2.5 75 1.7 6 100 2500 -- UMJ-192S SMD 1:1:1.25:1.25 75 1.7 10 140 1500 -- UHF-230B THT 1:1:2.5 100 1.7 20 20 3000 -- UMJ-190S SMD 1:1:1: 1 75 1.7 10 180 1500 -- UWJ-185 SMD 1:1:2 140 1.7 10 100 1500 -- UMJ-190S SMD 1:1: 1: 1 75 1.7 10 180 1500 -- UMJ-195S SMD 1:1:2:2 75 1.7 10 180 1500 -- UHJ-185 SMD 1:1:2:2 120 1.7 20 20 3000 -- UMJ-190S SMD 1:1:1:1 75 1.7 10 180 1500 -- UWJ-185 SMD 1:1:2 140 1.7 10 100 1500 -- 75 1.7 5 150 1500 -- Dual SMD Interface Transformer Infineon P E B 2096, P S B 2196 & P S B 2197 UAJ-140C SMD 1:1:2: 2 TH & SMD Interface Modules AMD AM2095 & AM20950 PEB2095 IBS Infineon National UMF-130A-152 THT 1:1: 2.5 75 1.0 6 100 1500 2 x 1.5 UMV-130B-172 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 1.7 UMV-130B-602 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 6.0 UAJ-130A-502 SMD 1:1: 2.5 75 1.7 5 100 1500 2 x 5.0 UMF-130A-152 THT 1:1: 2.5 75 1.0 6 100 1500 2 x 1.5 UMV-130B-172 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 1.7 UMV-130B-602 THT 1:1: 2.5 75 1.7 6 100 2500 2 x 6.0 UAJ-130A-502 SMD 1:1: 2.5 75 1.7 5 100 1500 2 x 5.0 PEB20590VIP/PEB20591VIP-8 UAJ-120A-502 SMD 1:1: 2 75 1.7 5 100 1500 2 x 5.0 P E B 2096, P S B 2196 & P S B 2197 UAJ-140B-502 SMD 1:1: 2: 2 75 1.7 10 180 1500 2 x 5.0 TP34 & TP3406 UAJ-120A-502 SMD 1:1: 2 75 1.7 5 100 1500 2 x 5.0 THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications (07-06) Communications\U Interface\UPO ISDN • UPO THT Single Interface Transformer Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TSS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformers Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 DCR (Ohms per w inding) Turns Ratio ±1% LP (mH Min) ^IDC (mA) LL (µH) CC (pF Max) Pri S ec UF-130A 1:1:2,5 1,7 75 6 100 0,80 2,00 2500 UV-130A 1:1:2,5 1.7 75 6 100 0,80 2,00 2500 Part Number VP (Vrms) Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: 2,5kV for 1 sec. - Line side windings in series to IC winding 0,5kV for 2 sec. - Line side winding to winding Dimensions & Schematic UF 0.551 (14.00) 0.500 (12.70) 5 0.492 (12.50) 0.433 (11.00) 0.059 (1.50) 0.138 (3.50) 6 0.400 (10.16) 0.200 (5.08) TALEMA IN WK/YR UF-130A 1 6 0.551 (14.00) 0.400 (10.16) 1 3 10 5 UV 10 IC 10 0.018 x 0.026 (0.45 x 0.66) 0.354 0.300 (9.00) (7.62) Line 1 0.059 (1.50) 0.571 (14.50) 5 TALEMA IN WK/YR UV-130A 6 0.018 x 0.026 (0.45 x 0.66) 0.138(3.50) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 8 ISDN • UPO THT Single Interface Transformer Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformers Complies w ith Reinforced Insulation Level EN60950 and UL1950 Part Number Turns Ratio ±2% LP (mH Min) ^IDC (mA) LL (µH) CC (pF Max) 1:1:2,5 1.7 100 20 20 UHF-230B DCR (Ohms per w inding) Pri S ec 1.2 2.1 VP (Vrms) 4000 Test Conditions Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side windings in series to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: 4,0kV for 2 sec. - Line side windings in series to IC winding 3,0kV for 1 min. - Line side windings in series to IC winding Dimensions & Schematic UHF 0.583 (14.80) 0.295 0.197 (7.50) (5.00) 0.654 (16.60) 1 2 0.571 (14.50) 0.079 (2.00) Line 3 0.591 (15.00) 6 5 2 0.138 (3.50) 0.024 (0.60) 4 IC 1 5 3 TALEMA IN WK/YR UHF-230B 4 6 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications ISDN - UPO SMD Single Interface Transformers Features • matched to Infineon’s PEB20950 & PEB20951 and National’s TP34 & TP3406 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO SMD Interface Transformers Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Part Number DCR (Ohms) LP (mH min) LL ^IDC CC ±2% (µH) (mA) (pF Max) Primary Secondary (Vrms) 1:1:4 1:1:2 1.7 1.7 10 20 140 140 100 90 1.5 1.5 5.2 3.0 1500 1500 Turns Ratio UWJ-180 UWJ-185 VP Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1500 V for 2 Sec. Line side windings in series to IC side winding Dimensions & Schematic UWJ Suggested Pad Layout 0.654 0.591 (16.60) (15.00) TALEMA IN WK/YR Part Number 0.400 (10.16) Line 6 0.709 (18.00) 0.100 (2.54) 0.400 (10.16) 0° - 8° 0.047 (1.20) 1 7 9 10 0.098 (2.50) 0.520 (13.20) 0.413 0.461 (10.50) (11.70) 0.020 (0.50) IC 0.200 (5.08) Surface Coplanarity will be 0.004(0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 5 ISDN - UPO SMD Single Interface Transformers Features • matched to Infineon’s PSB2196 & PSB2197 chipsets • excellent and consistent balance between windings • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature: -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount UPO Interface Transformers Complies w ith Reinforced Insulation Level EN60950, UL1950 and UL1459 Part Number (mH min) LL (µH) ^IDC (mA) CC (pF Max) Primary Secondary VP (Vrms) 1:1:2: 2 1.7 20 120 20 1.3 1.3 3000 UHJ-185 LP DCR (Ohms) Turns Ratio ±2% Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding in series to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 3kV for 2 sec. Line side windings to IC side windings Reinforced Insulation: Line Side in series to IC side in series Working Voltage: 250Vrms Dimensions & Schematic UHJ Suggested Pad Layout 0.654 0.591 (16.60) (15.00) 0.400 (10.16) TALEMA IN WK/YR Part Number Line 0.709 (18.00) 0.100 (2.54) 0.400 (10.16) 0.047 (1.20) 0.098 (2.50) IC 5 1 6 7 2 3 8 4 0° - 8° 0.520 (13.20) 0.413 0.461 (10.50) (11.70) Surface Coplanarity will be 0.004(0.10) maximum 0.020 (0.50) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise 0.200 (5.08) Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications ISDN • UPO SMD Single Interface Transformers Features • designed for optimum compatability with all established interface IC’s • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO Interface Transformer Complies w ith Basic Insulation Level EN6-950, UL1950 and UL1459 DCR (Ohms per w inding) Turns Ratio ±2% LP (mH Min) ^IDC (mA) LL (µH) CC (pF Max) Pri S ec UMJ-190S 1:1:1: 1 1.7 75 10 180 0.8 0.8 1500 UMJ-192S UMJ-195S 1:1:1,25: 1,25 1:1:2: 2 1.7 1.7 75 75 5 10 140 180 0.5 0.8 1.0 1.6 1500 1500 Part Number VP (Vrms) Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1,5kV - Line side winding in series to IC side winding in series Dimensions & Schematic Suggested Pad Layout 0.551 0.472 (14.00) (12.00) TALEMA IN WK/YR Part Number Schematic 0.300 (7.62) 0.100 (2.54) 0.300 (7.62) 0.433 (11.00) 0° - 8° 0.590 (15.00) 0.102 (2.60) Line 0.047 (1.20) IC 5 1 6 7 2 3 8 4 0.339 0.291 (8.60) (7.40) 0.020 (0.50) Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications ISDN • UPO SMD Interface Transfomer Modules Features • matched to Infineon’s PEB2096, PSB2196 & PSB2197 chipsets • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2001, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temberature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount U PO Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Turns Ratio ±2% Part Number UAJ-140C LP (mH min) ^IDC (mA) LL (µH) CC (pF Max) 1.7 75 5 150 1:1:2: 2 DCR (Ohms per w inding) Pri S ec 0.8 1.6 VP (Vrms) Schematic 1500 C Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1.5kV for 2 sec. - w1+w2 to w3+w4 0.5kV for 2 sec. - w1+w3 to w2+w4 High VoltageTest: UPULSE(w1+w2 to w3+w4); 2kVOP for 10µs/700µs wave form, 10 pulses in 10 second cycle with changing polarity. Dimensions 0.551 0.472 (14.00) (13.00) Schematic Suggested Pad Layout TALEMA IN WK/YR Part Number 0.100 (2.54) C 0.047 (1.20) Line IC 13 w3 7 x 0.100 (2,54) 0.787 (20.00) 0° - 8° 0.044 (1.11) 1 0.354 0.307 (9.00) (7.80) w1 14 15 0.591 0.374 (15.00) (9.50) 16 w4 w2 9 2 3 10 11 4 12 0.700 (17.78) 0.020 x 0.12 (0.50 x 0.30) Surface Coplanarity will be 0.004(0.10) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications Line IC 5 w3 w1 w4 w2 6 7 8 ISDN • UPO SMD Interface Transfomer Modules Features • designed for optimum compatability with all established interface IC’s • excellent and consistent balance between windings • compact size in surface mount package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temberature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings Surface Mount UPO Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Part Number Turns Ratio ±2% LP (mH min) ^IDC (mA) LL (µH) CC (pF Max) 1:1:2 1:1:2,5 1:1:2: 2 1.7 1.7 1.7 75 75 75 5 5 5 100 100 180 UAJ-120A-502 UAJ-130A-502 UAJ-140B-502 DCR (Ohms per w inding) Pri S ec 0.8 0.5 0.8 1.6 1.0 1.6 Double Choke VP (Vrms) Schematic 1500 1500 1500 A A B LN (mH) DCR (Ohms) 5 5 5 0.4 0.4 0.4 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrms Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side winding (IC windings in series) Inductance CM Choke: Measured @ 10kHz, 100mVrms Dimensions & Schematic Suggested Pad Layout A Line 0.100 (2.54) 0.044 (1.11) 7 x 0.100 (2,54) 0.787 (20.00) 0.047 (1.20) 0.591 0.374 (15.00) (9.50) 0° - 8° 0.551 0.472 (14.00) (13.00) TALEMA IN WK/YR Part Number 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) IC 5 8 4 3 14 2 1 15 16 9 B 0.700 (17.78) Line IC 5 8 4 3 7 10 14 9 2 1 15 16 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications ISDN • UPO THT Interface Transformer Module Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • compact size in through-hole package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings U PO TH Interface Transformer Module C omplies w ith B asic Insulation Level EN 60950, U L1950 and U L1459 Part N umber UMF-130A-152 Turns R atio ±1% LP (mH Min) ^IDC (mA) LL (µH ) CC (pF Max) 1:1:2,5 1,0 75 6 100 DCR (Ohms per w inding) Pri S ec 0,31 0.65 D ouble C hoke VP (Vrms) Schematic LN (mH ) DCR (Ohms) 1500 A 1,5 0,36 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: Transformer - 1,5kV for 1 sec. - Line side windings in series to IC winding Choke - 0,5kV for 1 sec. - winding to winding Dimensions & Schematic UMF 0.551 (14.00) 0.500 (12.70) 5 0.492 (12.50) 0.433 (11.00) 0.059 (1.50) 0.138 (3.50) Line 6 0.400 (10.16) 0.200 (5.08) TALEMA IN WK/YR UMF-130A-152 1 6 7 8 IC 9 1 2 10 5 0.018 x 0.026 (0.45 x 0.66) 4 3 10 Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Sales & Marketing, Design and Manufacturing Facilities http://www.talema-nuvotem.com Eastern Europe & Czech Republic NT MAGNETICS s.r.o. Chebská 27 322 00 Plzeñ Tel: Int. + 420 377 - 338 351 Fax: Int. + 420 377 - 338 350 Email: [email protected] Web Site: www.ntmagnetics.cz Germany Ireland India TALEMA ELEKTRONIK GMBH Sembdnerstr. 5, Postfach 2523 82110 Germering Tel: Int. + 49 89 - 841 00 - 0 Fax: Int. + 49 89 - 841 00 25 Email: [email protected] NUVOTEM TEO. Crolly Co. Donegal Tel: Int. + 353 74 - 954 8666 Fax: Int. + 353 74 - 954 8139 Email: [email protected] TALEMA ELECTRONIC PVT. LTD. Opposite the SIDCO Industrial Estate Gins Towers 4/5S.H/1, Omalur Main Road Salem - 636 004, Tamil Nadu Tel: Int. + 91 427 - 244 1325 Fax: Int. + 91 427 - 243 0034 E-mail: [email protected] Web Site: www.talemaindia.com THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications ISDN • UPO THT Interface Transformer Modules Features • matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chipsets • excellent and consistent balance between windings • compact size in through-hole package • complies fully with all international standards for U-Interface • manufactured in an ISO-9001:2000, TS-16949:2002 and ISO-14001:2004 certified Talema facility • operating temperature -40° to +85°C • fully RoHS compliant and meets lead free reflow level J-STD-020C Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings UPO TH Interface Transformer Modules Complies w ith Basic Insulation Level EN60950, UL1950 and UL1459 Turns Ratio ±1% LP (mH Min) ^IDC (mA) LL (µH) CC (pF Max) UMV-130B-172 1:1:2,5 1,7 75 6 UMV-130B-602 1:1:2,5 1.7 75 6 Part Number DCR (Ohms per w inding) Double Choke VP (Vrms) Schematic Pri S ec 100 0,80 2,00 2500 100 0,80 2,00 2500 LN (mH) DCR (Ohms) B 1,7 0,25 B 6,0 0,80 Test Conditions: Inductance: Line side windings in series - measurement @ 10kHz, 100mVrms Leakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrms Coupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrms Test Voltage: Transformer - 2,5kV for 1 sec. - Line side windings in series to IC winding 0,5kV for 1 sec. - Primary winding to Primary winding Choke - 0,5kV for 1 sec. - winding to winding Dimensions & Schematic UVM 0.020 x 0.020 (0,52 x 0,52) 1.142 (29.00) 10 8 x 0.100 (2,54) 9 TALEMAINWK/YR UMV-130B-XXX Line 1 2 3 IC 9 4 5 1 18 0.350 (8.89) 0.413 (10,50) 18 0.059 (1.50) 0.594 (15.10) 17 0.138 ±0.020 (3,50 ±0,50) Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise THE TALEMA GROUP • Magnetic Components for Universal Applications 16 10