Schottky Barrier Diode Data Sheet RB510VM-30 lApplication lDimensions (Unit : mm) General rectification 1.25±0.1 lLand size figure (Unit : mm) 0.1±0.1 0.05 0.9 0.8 (1) 1) Ultra small mold type.(UMD2) 2.5±0.2 1.7±0.1 2.1 lFeatures 2) High reliability UMD2 3) Low VF (2) (1) Cathode 0.3±0.05 lConstruction Silicon epitaxial planar type lStructure 0.7±0.2 0.1 : Manufacture date ROHM : UMD2 JEDEC :SOD-323 JEITA : SC-90/A (2) Anode lTaping specifications (Unit : mm) 4.0±0.1 1.0 4.0±0.1 2.8±0.1 5.5±0.2 +0.1 1.4 -0.05 0.25±0.05 8.0±0.2 +0.1 -0 3.5±0.05 1.75±0.1 1.5 2.0±0.05 +0.2 -0 1.5 MAX lAbsolute Maximum Ratings (Tc= 25°C) Parameter Symbol Conditions Limits Unit Repetitive peak reverse voltage VRM Duty≦0.5 30 V Reverse voltage VR Direct reverse voltage 30 V Average forward rectified current Io Glass epoxy board mounted, 60Hz half sin wave, 100 mA 0.5 A Non-repetitive forward current surge peak IFSM Tj - 150 °C Tstg - -55 to +150 °C Operating junction temperature Storage temperature resistive load 60Hz half sin wave, Non-repetitive at Ta=25ºC , 1cycle lElectrical Characteristics (Tj= 25°C) Parameter Symbol Conditions Min. Forward voltage VF IF=10mA - - 0.46 V Reverse current IR VR=10V - - 0.3 mA www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 1/5 Typ. Max. Unit 2015.05 - Rev.A Data Sheet RB510VM-30 lElectrical Characteristic Curves 1000 1000 REVERSE CURRENT : IR (mA) FORWARD CURRENT : IF (mA) Tj = 150°C Tj = 150°C 100 10 Tj = 125°C Tj = 75°C 1 Tj = 25°C Tj = -25°C 100 Tj = 125°C 10 1 Tj = 75°C 0.1 Tj = 25°C 0.01 0.001 Tj = -25°C 0.1 0.0001 0 200 400 600 800 1000 1200 0 FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS 10 20 30 REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS 10 460 FORWARD VOLTAGE : VF (mV) CAPACITANCE BETWEEN TERMINALS : Ct (pF) Tj = 25°C f = 1MHz 1 Tj=25°C IF=10mA n=30pcs 450 440 430 420 410 Ave. : 395.1mV 400 390 380 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. VF DISPERSION MAP 2/5 2015.05 - Rev.A Data Sheet RB510VM-30 lElectrical Characteristic Curves 10.0 Tj=25°C VR=10V n=30pcs 0.07 0.06 0.05 0.04 Ave. : 0.026mA 0.03 0.02 Tj=25°C f=1MHz VR=0V n=10pcs 9.5 CAPACITANCE BETWEEN TERMINALS : Ct (pF) REVERSE CURRENT : IR (mA) 0.08 9.0 8.5 8.0 Ave. : 7.1pF 7.5 7.0 6.5 6.0 0.01 5.5 0 5.0 IR DISPERSION MAP Ct DISPERSION MAP 10 8 IFSM 1cyc 7 8.3ms Ta=25°C 6 5 Ave. : 3.12A 4 3 2 1 IFSM PEAK SURGE FORWARD CURRENT : IFSM (A) PEAK SURGE FORWARD CURRENT : IFSM (A) 9 8.3 8.3 ms ms 1cyc Ta=25°C 1 0 1 100 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS IFSM DISPERSION MAP www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 10 3/5 2015.05 - Rev.A Data Sheet RB510VM-30 lElectrical Characteristic Curves 0.14 10 PEAK SURGE FORWARD CURRENT : IFSM (A) Tj = 150°C 0.12 1cyc IFSM FORWARD POWER DISSIPATION : PF (W) time Ta=25°C 0.10 D = 1/2 0.08 Sin(θ=180) 0.06 0.04 0.02 1 0.00 1 10 100 0 50 100 150 200 AVERAGE RECTIFIED FORWARD CURRENT : Io (mA) Io-PF CHARACTERISTICS TIME : t (ms) IFSM-t CHARACTERISTICS 1000 TRANSIENT THERMAL IMPEDANCE : Rth (°C/W) 0.010 Tj = 150°C 0.008 REVERSE POWER DISSIPATION : PR (W) DC 0.006 Sin(θ=180) 0.004 D = 1/2 DC 0.002 10 20 30 100 Glass epoxy board mounted IM=10mA PF=0.3W time 1ms 300ms 0.01 0.1 1 10 100 1000 TIME : t (s) Rth-t CHARACTERISTICS REVERSE VOLTAGE : VR (V) VR-PR CHARACTERISTICS www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Rth(j-c) 10 0.001 0.000 0 Rth(j-a) 4/5 2015.05 - Rev.A Data Sheet RB510VM-30 lElectrical Characteristic Curves 300 IO 0A 0V 250 t VR D=t/T VR=VRM/2 Tj=150°C T 200 DC 150 D = 1/2 100 Sin(θ=180) 50 AVERAGE RECTIFIED FORWARD CURRENT : Io (mA) AVERAGE RECTIFIED FORWARD CURRENT : Io (mA) 300 0 IO 0A 0V 250 VR t T 200 DC 150 D=t/T VR=VRM/2 Tj=150°C D = 1/2 100 Sin(θ=180) 50 0 0 25 50 75 100 125 150 0 25 50 75 100 125 150 CASE TEMPERATURE : Tc (°C) DERATING CURVE (Io-Tc) AMBIENT TEMPERATURE : Ta (°C) DERATING CURVE (Io-Ta) ELECTROSTATIC DISCHARGE TEST : ESD (kV) 30 25 20 15 Ave. : 7.4kV 10 5 Ave. : 1.0kV 0 C=200pF R=0W C=100pF R=1.5kW ESD DISPERSION MAP www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. 5/5 2015.05 - Rev.A Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. R1102A