XZMDKCBD59W-1 Part Number: 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP PRELIMINARY SPEC Features z 1.6mmx1.5mm SMT LED, 0.7mm thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Notes: ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) MDK (AlGaInP) CBD (InGaN) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 150 mA Power Dissipation PD 75 120 mW Operating Temperature TA -40 ~ +85 °C Storage Temperature Part Number XZMDKCBD59W-1 Tstg Emitting Color -40 ~ +85 Emitting Material Red AlGaInP Blue InGaN Published Date : OCT 29, 2009 Operating Characteristics (TA=25°C) CBD (InGaN) Unit Forward Voltage (Typ.) (IF=20mA) VF 1.95 3.3 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.0 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 650 468 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 630 470 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 25 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 100 pF Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : XDSB3714 MDK (AlGaInP) V1 Wavelength nm λP min. typ. 70 218 650 50 89 468 Checked : B.L.LIU Viewing Angle 2 θ 1/2 120° P.1/5 Part Number: XZMDKCBD59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP MDK Published Date : OCT 29, 2009 Drawing No : XDSB3714 V1 Checked : B.L.LIU P.2/5 Part Number: XZMDKCBD59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP CBD Published Date : OCT 29, 2009 Drawing No : XDSB3714 V1 Checked : B.L.LIU P.3/5 Part Number: XZMDKCBD59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : OCT 29, 2009 Drawing No : XDSB3714 V1 Checked : B.L.LIU P.4/5 Part Number: XZMDKCBD59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : OCT 29, 2009 Drawing No : XDSB3714 XZMDKCBD59W-1 V1 Checked : B.L.LIU P.5/5