SUNLED ZM2CR55W

Part Number:
www.SunLED.com
ZM2CR55W
3.2x1.6mm SMD CHIP LED LAMP
PRELIMINARY SPEC
Features
z 3.2mmx1.6mm
z LOW
SMT LED, 1.1mm THICKNESS.
POWER CONSUMPTION.
z WIDE
z IDEAL
VIEWING ANGLE.
FOR BACKLIGHT AND INDICATOR.
z VARIOUS
COLORS AND LENS TYPES AVAILABLE.
z PACKAGE
: 2000PCS / REEL.
z MOISTURE
z RoHS
SENSITIVITY LEVEL : LEVEL 3.
COMPLIANT.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
M2CR
(AlInGaP)
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
30
mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
150
mA
Power Dissipation
PT
84
mW
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
Part
Number
ZM2CR55W
Emitting
Color
Red
Published Date : FEB 26 ,2008
Emitting
Material
AlInGaP
Operating Characteristics
(TA=25°C)
°C
Lens-color
Water Clear
Drawing No : SDSA6213
M2CR
(AlInGaP)
Unit
Forward Voltage (Typ.)
(IF=20mA)
VF
2.2
V
Forward Voltage (Max.)
(IF=20mA)
VF
2.8
V
Reverse Current (Max.)
(VR=5V)
IR
10
uA
Wavelength of Peak
Emission (Typ.)
(IF=20mA)
λP
640
nm
Wavelength of Dominant
Emission (Typ.)
(IF=20mA)
λD
630
nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ
25
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
27
pF
Luminous
Intensity
(IF=20mA)
mcd
min.
typ.
650
995
V1
Wavelength
nm
λP
Viewing
Angle
2 θ 1/2
640
120°
Checked : B.L.LIU
P.1/4
Part Number:
www.SunLED.com
ZM2CR55W
3.2x1.6mm SMD CHIP LED LAMP
™ M2CR
Published Date : FEB 26 ,2008
Drawing No : SDSA6213
V1
Checked : B.L.LIU
P.2/4
Part Number:
www.SunLED.com
ZM2CR55W
3.2x1.6mm SMD CHIP LED LAMP
™ Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
™ The device has a single mounting surface. The device
must be mounted according to the specifications.
™ Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 26 ,2008
Drawing No : SDSA6213
V1
Checked : B.L.LIU
P.3/4
Part Number:
www.SunLED.com
3.2x1.6mm SMD CHIP LED LAMP
PACKING & LABEL SPECIFICATIONS
Published Date : FEB 26 ,2008
ZM2CR55W
Drawing No : SDSA6213
ZM2CR55W
V1
Checked : B.L.LIU
P.4/4