Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC Features LOW POWER CONSUMPTION. 2.4mmx2.0mm SMT LED, 0.8mm THICKNESS. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: Operating Characteristics (TA=25°C) 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25°C) ME (InGa AlP) BGG (InGa N) BBG (InG aN) Unit BGG ME (InGaA (InGa N) lP) BBG (InG aN) Unit Forward Voltage (Typ.) (IF=20mA) VF 2.0 3.2 3.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 4.0 4.0 V Reverse Current (Max.) (VR=5V) IR 10 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λp 630 520 468 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 621 525 470 nm Reverse Voltage VR 5 5 5 V Forward Current IF 30 30 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 195 100 100 mA Power Dissipation PT 75 120 120 mW - 1000 1000 V Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 35 21 nm °C Capacitance (Typ.) (VF=0V, f=1MHz) C 25 100 100 pF Electrostatic Discharge Threshold (HBM) Operating Temperature Storage Temperature Part Number ZMEBGGBBG93W TA -40 ~ +85 Tstg -40 ~ +85 Emitting Color Emitting Material Red InGaAlP Green InGaN Blue InGaN Published Date :FEB 27 ,2008 Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA4414 Wavelength nm λP min. typ. 110 297 630 110 297 520 50 118 468 V5 Checked : B.L.LIU Viewing Angle 2 θ 1/2 120° P.1/6 Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP ME Published Date :FEB 27 ,2008 Drawing No : SDSA4414 V5 Checked : B.L.LIU P.2/6 Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP BGG Published Date :FEB 27 ,2008 Drawing No : SDSA4414 V5 Checked : B.L.LIU P.3/6 Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP BBG Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date :FEB 27 ,2008 Drawing No : SDSA4414 V5 Checked : B.L.LIU P.4/6 Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Published Date :FEB 27 ,2008 Drawing No : SDSA4414 V5 Checked : B.L.LIU P.5/6 Part Number: ZMEBGGBBG93W 2.4mmx2.0mm FULL-COLOR SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS Published Date :FEB 27 ,2008 Drawing No : SDSA4414 ZMEBGGBBG93W V5 Checked : B.L.LIU P.6/6