8+ port oem industrial ethernet managed switch

PRODUCT DATASHEET
ET-8MS-OEM
8+ PORT OEM INDUSTRIAL ETHERNET MANAGED SWITCH
The ET-8MS-OEM is a 8+ port industrial Ethernet switch
designed for OEM embedded applications. It allows you
to easily and quickly create your own custom switch or
Ethernet enable your existing OEM system. This powerful
off-the-shelf solution will save you time and money!
PRODUCT HIGHLIGHTS
n Board level design for embedded applications
n 10 possible ports including one MII
n Eight 10/100 PHYs and magnetics on-board
n Two Gigabit available through external PHYs
n Board-to-board or board-to-wire connections
n Interface options for external LEDs
n PC/104 footprint 3.55 x 3.78” (9.0 x 9.6 cm)
n -40 to 75°C operating range
REAL-TIME SECURE PERFORMANCE
n Fast wire-speed switching
n Intelligent message routing - No collisions!
n Real-Time-RingTM & Rapid Spanning Tree (RSTP)
for fast redundant ring or mesh connections
n SNMPv1 and v2 network management
n SNMPv3 authentication & encryption for security
n SNMP notifications (traps) for report on event
n Priority Queuing (QoS/CoS) for real-time operation
n IGMP for Multicast filtering (snooping & querying)
n VLAN for convenient traffic segregation
n Broadcast & multicast storm protection
n RMON & port mirroring for advanced diagnostics
n Security with HTTPS, SSL, SSH, SNMPv3 & more
n Easy to use interfaces: web, CLI or Telnet
n Free firmware upgrades forever
Sixnet Knows Industrial
We have been designing industrial hardware such as
Remote Terminal Units for over 30+ years and have
used this expertise to design the toughest Ethernet
switches on the market. Don’t trust your critical
communications to so-called industrial hardware from
commercial switch manufacturers. Sixnet switches
give you proven assurance that your system will keep
running for years to come.
Offered with board-to-wire or
board-to-board connectors
Bottom view with board-to-board
connectors shown
Ideal for Commercial
Off the Shelf Solutions
solutions for your industrial networking challenges
www.sixnet.com
ET-8MS-OEM
8+ PORT OEM INDUSTRIAL ETHERNET MANAGED SWITCH specifications
ETHERNET PERFORMANCE
n
Managed switch
n
Store & forward wire-speed switching
n
Automatic address learning, aging and migration
n
Full duplex operation with flow control (no collisions)
n
All IEEE 802.3 Ethernet protocols supported
n
8192 MAC addresses supported
n
Memory bandwidth 32 Gbps
n
Typical latency (varies on load)
p
@ 100 Mbps: 5 µs + frame time
p
@ 10 Mbps: 16 µs + frame time
n
Ethernet isolation 1500 VRMS 1 minute
ETHERNET ports
n
10 possible Ethernet ports total
n
8 fast Ethernet with on-board PHYs and magnetics;
available through board-to-board or wire connectors
n
2 Gigabit Ethernet (require external PHYs and
magnetics);
available
through
board-to-board
connector
n
1 MII port (shared with 1 Gigabit port above) for interface
to an external CPU or PHY or fiber optic transceiver;
available through board-to-board connector
n
Ports support plug and play operation
p
Auto-negotiation for 10 or 100 Mbps
p
Auto-MDI/MDIX-crossover for either cable type
p
Auto-polarity corrects for crossed +/- signals
ETHERNET COMPLIANCE
n IEEE 802.3 (10Mbps Ethernet supports legacy devices)
n IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
n IEEE 802.3z (Gigabit Ethernet 1000Mbps)
n IEEE 802.3x (Full-Duplex with Flow Control)
n IEEE 802.1D/w, 802.1p, 802.1Q and much more
POWER INPUT
n Power input voltage: 3.3 or 5.0 VDC (regulated)
n Input power (typ. 8 ports active at 100 Mbps) 4 W
ENVIRONMENTAL
n
Operating temperature: -40 to +75°C (cold startup at -40)
n Storage temperature: -40 to +85 °C
n Humidity (non-condensing) 5 to 95% RH
n Vibration and shock: IEC68-2-6, -2-27 and -2-32
STANDARDS COMPLIANCE
n Electrical safety - EN61010-1
n EMC - FCC part 15, ICES-003; EN61000-6-4, -2
n RoHS and WEEE compliant
n ISO9001:2000 certified company
PHYSICAL
n Weight – 4 oz. (0.11 kg)
n Dimensions – 3.55 x 3.78” (9.0 x 9.6 cm)
ORDERING GUIDE
ET-8MS-OEM-1
ET-8MS-OEM-2 OEM switch with board-to-board connectors only (bottom of board)
A test fixture is also available. Contact Sixnet for details.
MECHANICAL DRAWING
2.90" [73.7mm]
Board to Board connectors
(-1 and -2 model)
OEM switch with all connectors
10/100 ethernet connectors (-1 model)
0.47" [11.8mm]
led serial interface connector (-1 model)
Per Port led (-1 model)
0.66" [16.7mm]
0
1
2
3
4
5
7
6
0
1
3.38" [85.9mm]
3
side
View
4
top
View
5
6
3.78" [96.0mm]
2
7
standard
0.06" [1.6mm]
Pc/104
0.19" [4.9mm]
footprint
All specifications are subject to change. Consult factory for latest info.
Bottom
View
3.55" [90.2mm]
usB connectors
(-1 model)
Sixnet Technology Park
331 Ushers Road • Ballston Lake, NY 12019 • USA
1.518.877.5173 • Fax 1.518.877.8346 • sales@sixnet.com
solutions for your industrial networking challenges
rs232 connector
(-1 model)
Power connector
(-1 model)
Datasheet ET-8MS-OEM
Rev: 11 Sept, 2009
www.sixnet.com