RENESAS R2J20651NP-G3

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
R2J20651NP
Integrated Driver – MOS FET (DrMOS)
REJ03G1743-0400
Rev.4.00
Mar 12, 2010
Description
The R2J20651NP multi-chip module incorporates a high-side MOS FET, low-side MOS FET, and MOS-FET driver in
a single QFN package. The on and off timing of the power MOS FET is optimized by the built-in driver, making this
device suitable for large-current buck converters. The chip also incorporates a high-side bootstrap Schottky barrier
diode (SBD), eliminating the need for an external SBD for this purpose.
Features















Compliant with Intel 6  6 DrMOS specification
Built-in power MOS FET suitable for applications with 5 V/12 V input
Built-in driver circuit which matches the power MOS FET
Built-in tri-state input function which can support a number of PWM controllers
Capable of both 3.3 V and 5 V PWM signal
VIN operating-voltage range: 16 V max
High-frequency operation (above 1 MHz) possible
Large average output current (Max. 35 A)
Achieve low power dissipation
Controllable driver: Remote on/off
Low-side MOS FET disabled function for DCM operation
Built-in thermal warning
Built-in Schottky diode for bootstrapping
Small package: QFN40 (6 mm  6 mm  0.95 mm)
Terminal Pb-free/Halogen-free
Outline
Integrated Driver-MOS FET (DrMOS)
QFN40 package 6 mm × 6 mm
VCIN BOOT
GH
VIN
1
10
11
40
THWN
Driver
Pad
High-side
MOS Pad
DISBL#
VSWH
MOS FET Driver
LSDBL#
Low-side MOS Pad
PWM
31
CGND VDRV
GL
PGND
20
30
21
(Bottom view)
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 1 of 17
R2J20651NP
Block Diagram
Driver chip
BOOT
GH
VIN
VCIN
SBD
UVL
THWN
THWN
High-side
MOS FET
CGND
Level shifter
DISBL#
0.5 μA
VCIN
CGND
150 k
LSDBL#
PWM
VSWH
Overlap
protection
VCIN
Input logic
(TTL level)
(3 state in)
Low-side
MOS FET
CGND
PGND
VDRV
Notes: 1. Truth table for the DISBL# pin.
DISBL# Input
"L"
"Open"
"H"
2. Truth table for the LSDBL# pin.
Driver Chip Status
Shutdown (GL, GH = "L")
Shutdown (GL, GH = "L")
Enable (GL, GH = "Active")
3. Output signal from the UVL block
LSDBL# Input
"L"
"Open"
"H"
GL Status
"L"
"Active"
"Active"
4. Output signal from the THWN block
"H"
Thermal
warning
"H"
For active
UVL Output
Logic Level
GL
For shutdown
"L"
VL
VH
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 2 of 17
VCIN
THWN Output
Logic Level
"L"
Normal
operating
TL
TH
TIC (°C)
R2J20651NP
VIN
11
VIN
12
VIN
13
VIN
VIN
VIN
VSWH
GH
CGND
BOOT
VDRV
VCIN
LSDBL#
Pin Arrangement
10
9
8
7
6
5
4
3
2
1
40
PWM
39
DISBL#
38
THWN
VIN
14
37
CGND
VSWH
15
36
GL
PGND
16
35
VSWH
PGND
17
34
VSWH
PGND
18
33
VSWH
PGND
19
32
VSWH
PGND
20
31
VSWH
VIN
CGND
VSWH
VSWH
PGND
VSWH
PGND
PGND
PGND
PGND
PGND
PGND
PGND
21 22 23 24 25 26 27 28 29 30
(Top view)
Note: All die-pads (three pads in total) should be soldered to PCB.
Pin Description
Pin Name
LSDBL#
VCIN
VDRV
BOOT
CGND
GH
VIN
VSWH
PGND
GL
THWN
DISBL#
PWM
Pin No.
1
2
3
4
5, 37, Pad
6
8 to 14, Pad
7, 15, 29 to 35, Pad
16 to 28
36
38
39
40
Description
Low-side gate disable
Control input voltage (+5 V input)
Gate supply voltage (+5 V input)
Bootstrap voltage pin
Control signal ground
High-side gate signal
Input voltage
Phase output/Switch output
Power ground
Low-side gate signal
Thermal warning
Signal disable
PWM drive logic input
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 3 of 17
Remarks
When asserted "L" signal, Low-side gate disable
Driver Vcc input
5 V gate drive
To be supplied +5 V through internal SBD
Should be connected to PGND externally
Pin for Monitor
Pin for Monitor
Thermal warning when over 130°C
Disabled when DISBL# is "L"
Capable of both 3.3 V and 5 V logic input
R2J20651NP
Absolute Maximum Ratings
(Ta = 25°C)
Item
Power dissipation
Average output current
Input voltage
Supply voltage & Drive voltage
Switch node voltage
BOOT voltage
I/O voltage
Operating junction temperature
Storage temperature
Notes: 1.
2.
3.
4.
Symbol
Pt(25)
Pt(110)
Iout
VIN (DC)
VIN (AC)
VCIN & VDRV
VSWH (DC)
VSWH (AC)
VBOOT (DC)
VBOOT (AC)
Rating
25
8
35
–0.3 to +16
20
–0.3 to +6
16
25
22
25
Units
W
Vpwm, Vdisble,
Vlsdbl, Vthwn
Tj-opr
Tstg
–0.3 to VCIN + 0.3
V
–40 to +150
–55 to +150
°C
°C
A
V
V
V
V
Note
1
2
2, 3
2
2
2, 3
2
2, 3
2, 4
Pt(25) represents a PCB temperature of 25°C, and Pt(110) represents 110C.
Rated voltages are relative to voltages on the CGND and PGND pins.
The specification values indicated "AC" are limited within 100 ns.
VCIN + 0.3 V < 6 V
Safe Operating Area
Average Output Current (A)
45
40
35
30
25
Condition
VOUT = 1.3 V
VIN = 12 V
VCIN = 5 V
VDRV = 5 V
L = 0.45 μH
Fsw = 1 MHz
20
15
10
5
0
0
25
50
75
100
125
150
175
PCB Temperature (°C)
Recommended Operating Condition
Item
Input voltage
Supply voltage & Drive voltage
Symbol
VIN
VCIN & VDRV
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 4 of 17
Rating
Units
4.5 to 14
4.5 to 5.5
V
V
Note
R2J20651NP
Electrical Characteristics
(Ta = 25C, VCIN = 5 V, VDRV = 5 V, VSWH = 0 V, unless otherwise specified)
Min
3.1
2.7
—
—
Typ
3.5
3.0
0.5
29
Max
3.9
3.3
—
—
Units
V
V
V
mA
ICIN-DISBL
—
—
50
A
PWM rising threshold
PWM falling threshold
PWM input resistance
Tri-state shutdown window
VH-PWM
VL-PWM
RIN-PWM
VIN-SD
1.7
0.9
42
2.5
1.5
98
DISBL#
input
Shutdown hold-off time
Disable threshold
Enable threshold
tHOLD-OFF *
VDISBL
VENBL
LSDBL#
input
Input current
Low-side activation threshold
Low-side disable threshold
IDISBL
VLSDBLH
VLSDBLL
VL-PWM
—
0.9
1.9
—
1.9
0.9
2.1
1.2
70
—
240
1.2
2.4
0.5
2.4
1.2
VH-PWM
—
1.5
2.9
2.0
2.9
1.5
V
V
k
V
ns
V
V
A
V
V
Input current
Warning temperature
Temperature hysteresis
THWN on resistance
ILSDBL
TTHWN *1
THYS *1
RTHWN *1
THWN leakage current
ILEAK
–54
110
—
1.0
—
–27
130
15
2.5
0.001
–13.5
—
—
4.0
1.0
A
°C
°C
k
A
Supply
PWM
input
Thermal
warning
Note:
Item
VCIN start threshold
VCIN shutdown threshold
UVLO hysteresis
VCIN operating current
Symbol
VH
VL
dUVL
ICIN
VCIN disable current
1
1. Reference values for design. Not 100% tested in production.
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 5 of 17
Test Conditions
VH – VL
fPWM = 1 MHz,
Ton_pwm = 120 ns
DISBL# = 0 V, PWM = 0 V,
LSDBL# = Open
PWM = 1 V
DISBL# = 1 V
LSDBL# = 1 V
Driver IC temperature
THWN = 1 V
THWN = 5 V
R2J20651NP
Pin Connection
+5 V
0.1 μF
1.0 μF
CGND
0~10 Ω
VIN
(4.5 V~14 V)
Low Side Disable Signal INPUT
4
3
2
1
VDRV
VCIN
LSDBL#
VIN
PAD
13
CGND
PAD
14 VIN
15 VSWH
16 PGND
17
20
PWM INPUT
DISBL#
THWN
DISBL# INPUT
GL 36
R2J20651NP
VSWH 35
51 kΩ
+5 V
34
33
PGND
19
39
PWM
CGND 37
VSWH
PAD
18
40
38
VSWH
PGND
5
BOOT
12
6
CGND
10 μF × 4
7
GH
11
8
VSWH
9
VIN
CGND
10
21 22 23 24 25 26 27 28 29 30
32
31
0.45 μF
Vout
PGND
Power GND
Signal GND
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 6 of 17
PGND
R2J20651NP
Typical Application
(1) 12 V Input Power
+12 V
+5 V
VCIN
VDRV BOOT
THWN
DISBL#
GH
VIN
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
VCIN
GL
VDRV BOOT
THWN
DISBL#
GH
VIN
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
GL
PWM1
+1.3 V
PWM
Control
Circuit
PWM2
PWM3
VDRV BOOT
VCIN
GH
PWM4
VIN
THWN
DISBL#
R2J20651
NP
VSWH
Power GND
LSDBL#
PGND
PWM
CGND
GL
VDRV BOOT
VCIN
VIN
THWN
DISBL#
GH
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 7 of 17
GL
Signal GND
R2J20651NP
(2) 5 V Input Power
+5 V
VCIN
VDRV BOOT
THWN
DISBL#
GH
VIN
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
VCIN
GL
VDRV BOOT
THWN
DISBL#
GH
VIN
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
GL
PWM1
+1.5 V
PWM
Control
Circuit
PWM2
PWM3
VDRV BOOT
VCIN
GH
PWM4
VIN
THWN
DISBL#
R2J20651
NP
VSWH
Power GND
LSDBL#
PGND
PWM
CGND
GL
VDRV BOOT
VCIN
VIN
THWN
DISBL#
GH
R2J20651
NP
VSWH
LSDBL#
PGND
PWM
CGND
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 8 of 17
GL
Signal GND
R2J20651NP
Test Circuit
Vinput
A
IIN
V VIN
Vcont
A
ICIN
6.2 Ω
VCIN V
VCIN
VDRV
BOOT
LSDBL#
R2J20651
NP
VSWH
THWN
5V pulse
fPWM
Note: PIN = IIN × VIN + ICIN × VCIN
POUT = IO × VO
Efficiency = POUT / PIN
PLOSS(DrMOS) = PIN – POUT
Ta = 27°C
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 9 of 17
0.1 μF
VIN
DISBL#
PWM
CGND
PGND
GH
Electric
load
IO
GL
Average Output Voltage
Averaging
V
VO
circuit
R2J20651NP
Typical Data
Power Loss vs. Input Voltage
Power Loss vs. Output Current
1.5
10
VCIN = 5 V
VIN = 12 V
1.4 VOUT = 1.3 V
Normalized Power Loss
@ VIN = 12 V
Power Loss (W)
9 VCIN = 5 V
8 VOUT = 1.3 V
fPWM = 600 kHz
7 L = 0.45 μH
6
5
4
3
2
1.2
1.1
1.0
0.9
1
0
fPWM = 600 kHz
L = 0.45 μH
1.3 IOUT = 25 A
0
5
10
15
20
25
30
0.8
35
4
6
8
Output Current (A)
12
14
16
Input Voltage (V)
Power Loss vs. Output Voltage
Power Loss vs. Switching Frequency
1.5
1.5
VIN = 12 V
VIN = 12 V
1.4 VCIN = 5 V
1.4 VCIN = 5 V
fPWM = 600 kHz
L = 0.45 μH
1.3 IOUT = 25 A
1.2
1.1
1.0
Normalized Power Loss
@ fPWM = 600 kHz
Normalized Power Loss
@ VOUT = 1.3 V
10
VOUT = 1.3 V
L = 0.45 μH
1.3 IOUT = 25 A
1.2
1.1
1.0
0.9
0.9
0.8
0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4
0.8
250
Output Voltage (V)
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 10 of 17
500
750
1000
Switching Frequency (kHz)
1250
R2J20651NP
Typical Data (cont.)
Power Loss vs. VCIN
Power Loss vs. Output Inductance
1.5
1.5
VIN = 12 V
VOUT = 1.3 V
fPWM = 600 kHz
L = 0.45 μH
IOUT = 25 A
VIN = 12 V
1.4
VOUT = 1.3 V
fPWM = 600 kHz
1.3 IOUT = 25 A
Normalized Power Loss
@ VCIN = 5 V
Normalized Power Loss
@ L = 0.45 μH
1.4 VCIN = 5 V
1.2
1.1
1.0
1.2
1.1
1.0
0.9
0.9
0.8
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.8
4.0
Output Inductance (μH)
Average ICIN vs. Switching Frequency
VIN = 12 V
VCIN = 5 V
40 VOUT = 1.3 V
L = 0.45 μH
IOUT = 0 A
30
20
10
0
250
500
750
1000
Switching Frequency (kHz)
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 11 of 17
4.5
5.0
VCIN (V)
50
Average ICIN (mA)
1.3
1250
5.5
6.0
R2J20651NP
Description of Operation
The DrMOS multi-chip module incorporates a high-side MOS FET, low-side MOS FET, and MOS-FET driver in a
single QFN package. Since the parasitic inductance between each chip is extremely small, the module is highly suitable
for use in buck converters to be operated at high frequencies. The control timing between the high-side MOS FET, lowside MOS FET, and driver is optimized so that high efficiency can be obtained at low output-voltage.
VCIN & DISBL#
The VCIN pin is connected to the UVL (under-voltage lockout) module, so that the driver is disabled as long as VCIN
is 3.5 V or less. On cancellation of UVL, the driver remains enabled until the UVL input is driven to 3.0 V or less. The
signal on pin DISBL# also enables or disables the circuit.
Voltages from –0.3 V to VCIN can be applied to the DISBL# pin, so on/off control by a logic IC or the use of a resistor,
etc., to pull the DISBL# line up to VCIN are both possible.
VCIN
L
H
H
H
DISBL#

L
H
Open
Driver State
Disable (GL, GH = L)
Disable (GL, GH = L)
Active
Disable (GL, GH = L)
PWM & LSDBL#
The PWM pin is the signal input pin for the driver chip. The input-voltage range is –0.3 V to (VCIN + 0.3 V). When the
PWM input is high, the gate of the high-side MOS FET (GH) is high and the gate of the low-side MOS FET (GL) is
low.
PWM
L
H
GH
L
H
GL
H
L
The LSDBL# pin is the low-side gate disable pin for "Discontinuous Conduction Mode (DCM)" when LSDBL# is low.
Figure 1 shows the typical high-side and low-side gate switching and inductor current (IL) during Continuous
Conduction Mode (CCM) and low-side gate disabled when asserting low-side disable signal.
This pin is internally pulled up to VCIN with 150 k resistor.
When low-side disable function is not used, keep this pin open or pulled up to VCIN.
CCM Operation (LSDBL# = "H" or Open mode)
IL
GH
GL
Figure 1.1 Typical Signals During CCM
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 12 of 17
R2J20651NP
DCM Operation (LSDBL# = "L")
IL
0A
GH
GL
Figure 1.2 Typical Signals During Low-Side Disable Operation
The PWM input is TTL level and has hysteresis. When the signal route from the control IC is high impedance, the tristate function turns off the high- and low-side MOS FETs. This function operates when the PWM input signal stays in
the input hysteresis window for 240 ns (typ.). After the tri-state mode has been entered and GH and GL have become
low, a PWM input voltage of 2.1 V or more is required to make the circuit return to normal operation.
240 ns (tHOLD-OFF)
240 ns (tHOLD-OFF)
2.1 V
PWM 1.2 V
GH
GL
240 ns (tHOLD-OFF)
2.1 V
PWM 1.2 V
GH
GL
Figure 2
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 13 of 17
240 ns (tHOLD-OFF)
R2J20651NP
THWN
This thermal warning feature is the indication of the high temperature status.
THWN is an open drain logic output signal and need to connect a pull-up resistor (ex. 51 k) to THWN for systems
with the thermal warning implementation.
When the chip temperature of the internal driver IC becomes over 130°C, thermal warning function operates.
This signal is only indication for the system controller and does not disable DrMOS operation.
When thermal warning function is not used, keep this pin open.
"H"
THWN output
Logic Level
"L"
Thermal
warning
Normal
operating
115
130
TIC (°C)
Figure 3
MOS FETs
The MOS FETs incorporated in R2J20651NP are highly suitable for synchronous-rectification buck conversion. For the
high-side MOS FET, the drain is connected to the VIN pin and the source is connected to the VSWH pin. For the lowside MOS FET, the drain is connected to the VSWH pin and the source is connected to the PGND pin.
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 14 of 17
R2J20651NP
PCB Layout Example
Figure 4 shows an example of the PCB layout for the R2J20651NP. Placing several ceramic capacitors (e.g. 10 F)
between VIN and PGND can be expected to the decreasing switching noise and improvement of efficiency.
In that case, it is necessary to connect each GND pattern with low impedance by using other PCB layers.
Moreover, by taking the wide VSWH pattern, the effect of letting the heat from the low side MOS FET can be expected.
When R2J20651NP is mounted on a small substrate like POL module, the temperature rising of the device could be
eased if the thermal via-hole is added under the pad of VIN and VSWH.
10 μF
10 μF
Vin
10 μF
10 μF
GND
0.1 μF
GND
GND
Rboot
1 μF
VCIN
VSWH
To Inductor
GND
PWM
DISBL#
Via Hole
Figure 4 R2J20651NP PCB Layout Example (Top View)
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 15 of 17
R2J20651NP
Footprint Example
(Unit: mm)
6.20
2.3
0.20
2.3
0.20
0.1
0.1
2.3
0.20
C0.4
6.20
0.6
0.3
C0.1
13–R0.2
2.3
2.15
0.20
2.15
0.50
0.6
40–0.30
Figure 5 Footprint Example
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 16 of 17
R2J20651NP
Package Dimensions
JEITA Package Code
P-HVQFN40-p-0606-0.50
RENESAS Code
PVQN0040KC-A
Previous Code
—
MASS[Typ.]
—
.1
39
)
B
HE
E
B
1pin
40
40
2.2
C0.3
1.95
E /2
INDEX
1.95
4-C0.50
1pin
2.2
(0
D /2
2.2
4-
HD/2
0.2
0.2
HD
D
A
0.7
0.2
Reference
Symbol
2.05
X4
f S AB
b
x
20°
S AB
L1
S
c2
y1 S
A
A2
0.69
20°
2.05
ZD
e
t S AB
Lp
A1
X4
ZE
1.95
2.2
HE/2
CAV No.
Die No.
1.95
2-A section
y S
Dimension in Millimeters
Min Nom Max
D
5.95 6.00 6.05
5.95 6.00 6.05
E
A2 0.87 0.89 0.91
f
—
— 0.20
A 0.865 0.91 0.95
A1 0.005 0.02 0.04
b
0.17 0.22 0.27
b1 0.16 0.20 0.24
— 0.50 —
e
Lp 0.40 0.50 0.60
x
—
— 0.05
y
—
— 0.05
y1
—
— 0.20
t
—
— 0.20
HD 6.15 6.20 6.25
HE 6.15 6.20 6.25
ZD
— 0.75 —
ZE
— 0.75 —
L1 0.06 0.10 0.14
c1 0.17 0.20 0.23
c2 0.17 0.22 0.27
Ordering Information
Part Name
R2J20651NP#G3
Quantity
2500 pcs
REJ03G1743-0400 Rev.4.00 Mar 12, 2010
Page 17 of 17
Shipping Container
Taping Reel
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2010. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2