® SK2150 – SK2200 2.0A HIGH VOLTAGE SURFACE MOUNT SCHOTTKY BARRIER DIODE WON-TOP ELECTRONICS Pb Features Low Forward Voltage Epitaxial Construction with Oxide Passivation Guard Ring for Transient and ESD Protection Surge Overload Rating to 50A Peak A Low Power Loss Fast Switching Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes B D F C H G E Mechanical Data Dim Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Device Code, See Page 3 Weight: 0.093 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 SMB/DO-214AA Min Max A 3.30 3.94 B 4.06 4.70 C 1.91 2.11 D 0.152 0.305 E 5.08 5.59 F 2.13 2.44 G 0.051 0.203 H 0.76 1.27 All Dimensions in mm Maximum Ratings @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) Symbol SK2150 SK2200 Unit VRRM VRWM VR 150 200 V VR(RMS) 105 140 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 50 A Forward Voltage @IF = 2.0A VFM 0.9 V @TJ = 25°C @TJ = 100°C IRM 0.2 5.0 mA CJ 55 pF RθJA RθJL 80 24 °C/W TJ, TSTG -55 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Thermal Resistance, Junction to Ambient (Note 1) Thermal Resistance, Junction to Lead (Note 1) Operating and Storage Temperature Range Note: 1. Mounted on FR-4 PCB with 8.0 x 8.0mm copper pads. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS 2.0 1.5 1.0 0.5 Resistive or Inductive Load 0 10 Pulse Width = 300µs 1% Duty Cycle 1.0 TA = 125°C TA = 85°C 0.1 TA = 25°C 0.01 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 2.5 15 0 30 45 60 75 90 105 120 135 150 TL, LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 50 Single Half-Sine-Wave JEDEC Method 40 30 20 10 0 IR, INSTANTANEOUS REVERSE CURRENT (µA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) SK2150 – SK2200 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 10000 1000 TJ = 125°C 100 TJ = 75°C 10 1.0 TJ = 25°C 0.1 1 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics CJ, JUNCTION CAPACITANCE (pF) 100 f = 1MHz 80 60 40 20 0 1 www.wontop.com 2 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 5 Typical Junction Capacitance 1000 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® SK2150 – SK2200 WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) 2xx Cathode 2xx xx 0.082 MIN (2.10 MIN) = Polarity Band = Device Code = 150 or 200 0.106 MAX (2.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 12mm 1.6mm 4mm 12mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 14.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® SK2150 – SK2200 WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity SK2150-T3 SMB 3000/Tape & Reel SK2200-T3 SMB 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SK2150-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012