® MBRD1020CT – MBRD10100CT 10A SURFACE MOUNT DUAL SCHOTTKY BARRIER RECTIFIER WON-TOP ELECTRONICS Pb Features Schottky Barrier Chip Guard Ring Die Construction for Transient Protection High Surge Current Capability Low Power Loss, High Efficiency Ideally Suited for Automatic Assembly For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications A C B J D E PIN 1 2 3 K G H L P P Mechanical Data Dim Case: DPAK/TO-252, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.3 grams (approx.) Mounting Position: Any Marking: Device Code, See Page 3 Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 DPAK/TO-252 Min Max A 6.05 6.65 PIN 1 B 5.05 5.55 PIN 3 C 2.25 2.40 D 1.05 1.25 E 5.48 6.08 G 2.55 3.00 H 0.55 0.90 J 0.49 0.55 Case, PIN 2 K 0.95 1.25 L 0.49 0.55 P 2.30 Typical All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 115°C MBRD MBRD MBRD MBRD MBRD MBRD MBRD 1020CT 1030CT 1040CT 1045CT 1050CT 1060CT 1080CT 10100CT VRRM VRWM VR 20 30 40 45 50 60 80 100 V VR(RMS) 14 21 28 28 35 42 56 70 V Symbol Total Device Per Diode MBRD Unit IO 10 5.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 100 A Forward Voltage per diode @IF = 5.0A VFM @TJ = 25°C @TJ = 100°C IRM Peak Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Thermal Resistance, Junction to Ambient (Note 2) Thermal Resistance, Junction to Case (Note 2) Operating and Storage Temperature Range CJ 0.55 0.75 0.85 0.2 15 500 V mA 380 pF RθJA RθJC 70 2.5 °C/W TJ, TSTG -55 to +150 °C Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 2. Mounted on FR-4 PC board with minimum recommended pad layout per diode. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 1 ® WON-TOP ELECTRONICS 8 6 4 2 Resistive or Inductive Load 0 15 Pulse Width = 300µs 1% Duty Cycle TJ = 25°C 1050CT – 1060CT 10 1020CT – 1045CT 1.0 1080CT – 10100CT 0 30 45 60 75 90 105 120 135 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 100 Single Half-Sine-Wave JEDEC Method 80 60 40 20 0 1 100 10 TJ = 125°C TJ = 100°C 1.0 0.1 0.01 TJ = 25°C 2000 DC, TJ = 150°C Per Diode CJ, JUNCTION CAPACITANCE (pF) 3.6 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Forward Surge Current Derating Curve 4.0 PD, POWER DISSIPATION (W) 100 0.1 0 IFSM, PEAK FORWARD SURGE CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 10 IR, INSTANTANEOUS REVERSE CURRENT (mA) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) MBRD1020CT – MBRD10100CT 3.2 2.8 1080CT – 10100CT 2.4 1050CT – 1060CT 2.0 1.6 1020CT – 1045CT 1.2 0.8 f = 1MHz 1600 1200 1020CT – 1045CT 800 400 1050CT – 10100CT 0.4 0 0 0 www.wontop.com 2 4 2 3 5 1 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 5 Forward Power Dissipation 6 0.1 1 10 VR, DC REVERSE VOLTAGE (V) Fig. 6 Typical Junction Capacitance 100 © Won-Top Electronics Co., Ltd. Revision: September, 2012 ® MBRD1020CT – MBRD10100CT WON-TOP ELECTRONICS MARKING INFORMATION RECOMMENDED FOOTPRINT 0.298 (7.57) 0.109 (2.77) B10xxCT 0.091 (2.30) 0.24 (6.10) B10xxCT xx Polarity 0.056 (1.42) = Device Number = 20, 30, 40, 45, 50, 60, 80 or 100 = As Marked on Body 0.261 (6.63) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 16mm 4mm 1.6mm 16mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 2,500 340 x 337 x 45 5,000 370 x 370 x 420 40,000 18.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. © Won-Top Electronics Co., Ltd. Revision: September, 2012 www.wontop.com 3 ® MBRD1020CT – MBRD10100CT WON-TOP ELECTRONICS ORDERING INFORMATION Product No. Package Type Shipping Quantity MBRD1020CT-T3 DPAK 2500/Tape & Reel MBRD1030CT-T3 DPAK 2500/Tape & Reel MBRD1040CT-T3 DPAK 2500/Tape & Reel MBRD1045CT-T3 DPAK 2500/Tape & Reel MBRD1050CT-T3 DPAK 2500/Tape & Reel MBRD1060CT-T3 DPAK 2500/Tape & Reel MBRD1080CT-T3 DPAK 2500/Tape & Reel MBRD10100CT-T3 DPAK 2500/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MBRD1020CT-T3-LF. WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com www.wontop.com 4 We power your everyday. © Won-Top Electronics Co., Ltd. Revision: September, 2012