DC/DC Converters TES 2M Series, 2 Watt CB Features ◆ Supplementary and reinforced insulation ◆ I/O isolation 4000 VACrms rated for Scheme IEC 60950-1 IEC 60601-1 UL 60950-1 ES 60601-1 300 Vrms working voltage ◆ 2 x MOOP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition ◆ Industrial safety to UL/IEC/EN 60950-1 ◆ Ultracompact SMD-package ◆ Operating temp. range –25°C to +80°C ◆ Qualified for leadfree reflow solder process ◆ Available in tape & reel package ◆ 3-year product warranty The TES 2M series is range of compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required. These converters are qualified for high solder temperature profiles in leadfree solder processes. For automated SMD production lines the devices can be supplied in tape & reel package. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 2-0511M 5 VDC 400 mA 66 % TES 2-0512M 12 VDC 165 mA 66 % TES 2-0513M 5.0 VDC ±10% (nominal 05 VDC) 15 VDC 133 mA 66 % ±12 VDC ±83 mA 72 % TES 2-0523M ±15 VDC ±66 mA 73 % TES 2-1211M 5 VDC 400 mA 66 % TES 2-0522M TES 2-1212M TES 2-1213M TES 2-1222M 12.0 VDC ±10% (nominal 12 VDC) 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % ±12 VDC ±83 mA 74 % TES 2-1223M ±15 VDC ±66 mA 75 % TES 2-2411M 5 VDC 400 mA 66 % TES 2-2412M TES 2-2413M TES 2-2422M TES 2-2423M http://www.tracopower.com 24 VDC ±10% (nominal 24 VDC) 12 VDC 165 mA 66 % 15 VDC 133 mA 66 % ±12 VDC ±83 mA 74 % ±15 VDC ±66 mA 75 % Page 1 of 3 DC/DC Converters TES 2M Series 2 Watt Input Specifications Input current no load 5 Vin models: 60 mA typ. 12 Vin models: 30 mA typ. 24 Vin models: 15 mA typ. Reverse voltage protection 0.3 A max. Recommended input fuse (slow blow) 5 Vin models: 1.0 A 12 Vin models: 0.5 A 24 Vin models: 0.2 A Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Input filter internal capacitors Output Specifications Voltage set accuracy ±4 % Voltage balance (dual output models) 1 % max. Regulation – Input variation 1.2 % / 1 % change of Vin – Load variation 20 – 100 % 10 % max. 12 % max. for 5 Vout models. Ripple and noise (20 MHz Bandwidth) 150 mVp-p max. Temperature coefficient ±0.02 %/K Short circuit protection 0.5 sec. max. Minimum load 2 % of rated max current. Capacitive load single output models: 330 µF max. dual output models: 100 µF max. (each output) General Specifications Temperature ranges – Operating –25°C to +80°C – Storage –55°C to +125°C – Case temperature +90°C max. Derating 2.5 %/K above 60°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >2.0 Mio h Isolation voltage (50Hz, 60sec.) – Input/Output 4000 VACrms Isolation test voltage (1 sec.) 6000 Vpk Leakage current (at 240VAC, 60Hz) 2 µA max. Isolation capacitance – Input/Output 20 pF max. (at 100KHz, 1V) Isolation resistance – Input/Output >10 Gohm (at 500VDC) Safety standards IEC/EN 60950-1, IEC/EN 60601-1 3rd Edition, ANSI/AAMI ES60601-1 and CAN/CSA-C22.2 No. 60601-1, Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance Safety approvals www.tracopower.com/products/tes2m-cb60950.pdf www.tracopower.com/products/tes2m-cb60601.pdf www.ul.com/database File: e188913 - QQGQ2 www.ul.com/database File: e188913 - QQHM2 – CB test certificate according IEC 60950-1 – CB test certificate according IEC 60601-1 – UL online certification to UL 60950-1 (entry pending) – UL online certification to ES 60601-1 Switching frequency 50 – 100 kHz (PFM) Environmental compliance – Reach www.tracopower.com/products/tes2m-reach.pdf – RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 2M Series 2 Watt Physical Specifications Casing material plastic Weight 3.8 g (0.13oz) Lead-free reflow solder process as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Moisture sensivity level (MSL) level 2 as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Washing process www.tracopower.com/products/smd-wash.pdf Packaging www.tracopower.com/products/tes2m-pack.pdf Application note: www.tracopower.com/products/tes2m-application.pdf Outline Dimensions 9.0 (0.35) 0.25 (0.01) 24.0 (0.94) 1.0 (0.04) 0.15 9 top view 3.11 (0.12) 7 8 15.24 (0.60) 2.54 (0.10) Pin Single Dual 1 –Vin (GND) –Vin (GND) 7 No con. No con. 8 No con. Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin +Vin 1.4 (0.055) min. 2.8 3.11 (0.12) 15.24 (0.60) (0.11) 13.7 (0.54) 2.8 Solder Pad Dimension (0.11) 1 Pin-Out 18.1 (0.71) 10 13.7 (0.54) 16 0 - 4° 2.54 (0.10) Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.05 (±0.002) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. December 06. 2013 Page 3 of 3