TELEDYNE RELAYS

TELEDYNE RELAYS
SERIES
712
COMMERCIAL/INDUSTRIAL
TO-5 RELAYS
DPDT
SERIES
DESIGNATION
RELAY TYPE
712
DPDT basic relay
712D
DPDT relay with internal diode for coil transient suppression
712TN
DPDT relay with internal transistor driver and coil transient suppression diode
DESCRIPTION
INTERNAL CONSTRUCTION
The TO-5 relay, originally conceived and developed by Teledyne, has become one of the
industry standards for low level switching from dry circuit to 1 ampere. Designed expressly
for high density PC Board mounting, its small size and low coil power dissipation make the
TO-5 relay one of the most versatile ultraminiature relays available.
UPPER
STATIONARY
CONTACT
UNI-FRAME
ARMATURE
LOWER
STATIONARY
CONTACT
MOVING
CONTACT
The following unique construction features and manufacturing techniques provide excellent
resistance to environmental extremes and overall high reliability:
•
•
•
•
•
All welded construction.
Unique uni-frame design providing high magnetic efficiency and mechanical rigidity.
High force/mass ratios for resistance to shock and vibration.
Advanced cleaning techniques provide maximum assurance of internal cleanliness.
Precious metal alloy contact material with gold plating assures excellent high current
and dry circuit switching capabilities.
The 712D Series utilizes an internal discrete silicon diode, for coil transient protection. The
hybrid 712TN Series features an internal silicon diode and transistor driver. The integrated
packaging of the relay with its associated semiconductor devices greatly reduces PC Board
floor space requirements as well as component installation costs.
ENVIRONMENTAL AND
PHYSICAL SPECIFICATIONS
Temperature
(Ambient)
-55°C to +85°C
Vibration
10 g’s to 500 Hz (Note 3)
Shock
30 g’s for 6 msec. (Note 3)
half-sine
Enclosure
Hermetically sealed
Weight
0.09 oz (2.6 gms.) max.
By virtue of its inherently low intercontact capacitance and contact circuit losses, the TO-5
relay has shown itself to be an excellent ultraminiature RF switch for frequency ranges well
into the UHF spectrum. A typical RF application for the TO-5 relay is in hand held radio
transceivers, wherein the combined features of good RF performance, small size, low
coil power dissipation and high reliability make it a preferred method of TransmitReceive switching (see Figure 1).
98
SERIES 712
GENERAL ELECTRICAL SPECIFICATIONS
(@ 25°C)) (Notes 1 & 2)
Contact Arrangement
Rated Duty
Contact Resistance (Note 4)
Contact Load Rating (DC)
(See Fig. 2 for other DC
resistive voltage/current ratings)
2 Form C (DPDT)
Continuous
0.15 ohm max. before life; 0.25 ohm max. after life at 1A/28VDC, (measured 1/8” from header)
Resistive:
1 Amp/28VDC
Inductive:
200 mA/28VDC (320 mH)
Lamp:
100 mA/28VDC
Low Level: 10 to 50 µA/10 to 50 mV
Resistive:
250 mA/115VAC, 60 and 400Hz (Case not grounded)
100 mA/115VAC, 60 and 400Hz (Case grounded)
10,000,000 cycles (typical) at low level
01,000,000 cycles (typical) at 0.5A/28VDC resistive
00,100,000 cycles min. at all other loads specified above
2A/28VDC Resistive (100 cycles min.)
Contact factory
450 milliwatts typical at nominal rated voltage
4.0 msec. max. at nominal rated coil voltage (712TN Series: see Note 6)
712 Series: 3.0 msec. max.
712D, 712TN Series: 6.0 msec. max.
0.4 pf typical
1,000 megohms min. between mutually isolated terminals
Atmospheric pressure: 350 VRMS/60 Hz
60 min.
2.0 max.
0.3 min.
Base Voltage to Turn Off (VDC)
6.0 min.
Emitter-base breakdown (BVEBO) (VDC)
60 min.
Collector-base breakdown Voltage (BVCBO) (@ 25°C & Ic = 100 µA) (VDC)
Contact Load Ratings (AC)
Contact Life Ratings
Contact Overload Rating
Contact Carry Rating
Coil Operating Power
Operate Time
Release Time
lntercontact Capacitance
Insulation Resistance
Dielectric Strength
Diode P.I.V. (VDC) 712D, 712TN
Negative Coil Transient (VDC) 712D, 712TN
712TN
Transistor
Characteristics
DETAILED ELECTRICAL SPECIFICATIONS
(@ 25°C) (Note 2)
➧
BASE PART
NUMBERS
Coil Voltage (VDC)
Nom.
Max.
Coil Resistance (Ohms ± 20% @ 25°C) (Note 4)
Pick-up Voltage (VDC, Max.) Pulse Operated (712TN SERIES – See Note 6)
Base Current to Turn On (mADC, Min.) (Note 6)
712-5
712D-5
712TN-5
712-6
712D-6
712TN-6
712-9
712D-9
712TN-9
712-12
712D-12
712TN-12
712-18
712D-18
712TN-18
712-26
712D-26
712TN-26
5.0
5.8
50
3.6
3.00
6.0
8.0
98
4.2
2.04
9.0
12.0
220
6.5
1.36
12.0
16.0
390
8.4
1.03
18.0
24.0
880
13.0
0.68
26.5
32.0
1560
17.0
0.50
PERFORMANCE CURVES (NOTE 1)
TYPICAL RF PERFORMANCE
INS
ERT
ION
.2
LOS
300
S
.3
10
1.92
SWR)
20
1.22
SS (V
URN LO
RET
30
1.07
ACTS
CONT
ROSS
N AC
LES
IO
T
A
S PO
ISOL
CROS
ION A
T
A
L
ISO
40
50
60
1.02
1.01
VSWR
dB
.4
LOAD VOLTAGE (VDC)
0
.1
TYPICAL DC CONTACT RATING (RESISTIVE)
200
150
100
50
1.00
70
250
1.00
.01
0.5
.1
.5
1.0
0
0.1
0.2
0.3
0.4
0.5
0.6
FREQUENCY (GHz)
LOAD CURRENT (AMPS DC)
FIGURE 1
FIGURE 2
99
0.7
0.8
0.9
1.0
SERIES 712
OUTLINE DIMENSIONS
TERMINAL LOCATIONS AND PIN NUMBERING (REF. ONLY)
(Viewed from Terminals)
CASE DETAIL
.370
(9.40)
DIA. MAX.
SCHEMATIC DIAGRAMS
.031 (.79)
± .003 (0.08)
TRANSISTOR BASE
CONNECTION FOR
712TN ONLY
.335
(8.51)
DIA. MAX.
.035 (.89)
± .010 (0.25)
10
9
.275 (6.99) MAX.
.200 (5.08)
± .010 (.25) DIA.
2
3
7
36° ±3° TYP.
712
1
8
6
5
4
WIRE LEAD: .75 (19.05) MIN.
712D
712TN
+.002 (.05)
.017 (.43) –.001 (.03) DIA.
SCHEMATICS ARE VIEWED FROM TERMINALS
DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS)
MOUNTING PADS
Relays can be supplied with mounting pads which are attached to the relays. Mounting
pads can be supplied by adding M4 to the part number (e.g. 7XXM4-26A).
TYPICAL TTL INTERFACE CIRCUIT
(See Note 5)
VT
Vcc
RELAY
COIL
A
750Ω
1N914
B
5438
TYPICAL INSTALLATION
.300 MAX
(7.62)
3 KΩ
NOTES:
1. Material: Polyester film.
2. Increase contact resistance by 0.01 ohm.
(A) Internal Suppression Diode
(B) Internal Driver Transistor
NOTES:
1.
2.
3.
4.
5.
6.
Characteristics shown as "typical" are based on available data and are best estimates. No on-going verification tests are performed.
Unless otherwise specified, parameters are initial values.
Relays will exhibit no contact chatter in excess of 10 µsec or transfer in excess of 1 µsec.
For Reference Only. Coil Resistance not directly measurable on 712TN Relays.
Circuit is typical for all 712TN Series. Values shown are for 712TN-5 relay, and apply over full operating temperature range.
Limit base-emitter current to 15 mADC.
©1996
TELEDYNE RELAYS
100
12525 Daphne Avenue
Hawthorne, California 90250