9270 series 125ºc surface mount reed relays

9270 SERIES 125ºC SURFACE MOUNT REED RELAYS
9270 Series Surface Mount Reed Relays for 125ºC Operation
Based on the popular 9290 SMD Relay, the 9270 Series offers stable operation up to
125ºC. The 9270 is ideally suited for high temperature applications in the Automated
Test Equipment, Instrumentation and Telecom markets.
9270 Series Features
u Stable operation from -20 to 125ºC
u High Insulation Resistance - 1012Ω minimum (1013Ω typical)
.020u(5.08)
High reliability, hermetically sealed contacts for long life
u Minimum Footprint .140” Sq. (3.5mm Sq.)
u 50Ω Co-axial Shield for RF and Fast Rise Time Pulse switching
u External Magnetic Shield
u Tape & Reel available
u RoHS compliant
.670 (17.01)
Indicates Pin #1 side
9290-XX-XX
CO TO DATE CODE
Metal Cover
.670 (17.01)
.020 (5.08)
Indicates Pin #1 side
9290-XX-XX
CO TO DATE CODE
Metal Cover
DIMENSIONS
in Inches (Millimeters)
Gull Wing
2
.176 MAX
(4.4)
.193 Max. CL
(4.9)
.010 (0.254)
.800 ± .012
(20.32 ± .304)
.050 ± .012
(1.27 ± .304)
.670 (17.01)
.020 GAP
(.508 )
.176 MAX.
(4.4 ) 0º - 7º MAX
.020
(.508 )
.050 TYP .
(1.27)
.240
(6.10)
Metal Cover (Magnetic Shield)
. 018
(.457 )
Top View
.176 MAX
(4.4)
.208
(5.28)
J-Lead2
.050R
(1.27)
.020 (5.08)
Indicates Pin #1 side
Pin #1
CL
45º
.670 (17.01)
.020 GAP
(.508 )
.720 (18.28)
.020
(.508 )
.050 TYP .
(1.27)
Indicates Pin #1 side
Pin #1
.176 MAX.
(4.4 )
.600 (15.24)
Metal Cover (Magnetic Shield)
. 018
(.457 )
End View
.004
(.101
.015 RAD .
(.381 )
.004/-.000
+
.101/-.000)
.050
(1.2 7
.012
. 304)
.670 With Co ver
(17.01)
6 LEAD SMD .050 ON CENTER
.750 ON CENTER OF GULL
WING
PADS WITH CO VER
.193 Max.
(4.9 )
.800
(20.32
1
2
3
4
5
6
0 -7 MAX
.012
.304)
Ordering Information
9270-XX-XX*
.004
(.101
.015 RAD .
(.381 )
.004/-.000
+
.101/-.000)
.050
(1.2 7
.012
. 304)
.670 With CoCoil
ver
(17.01)
Voltage
05=5 volts
12=12 volts
.193 Max.
(4.9 )
Lead Style
00 = Gull Wing
20 = J- Lead
*Add suffix “TR” for Tape & Reel
.800
(20.32
.012
.304)
0 -7 MAX
6 LEAD SMD .050 ON CENTER
.750 ON CENTER OF GULL
W
PADS WITH CO VER
1
3
5
17092013
(401) 943.2686
|
MODEL NUMBER
Parameters
9270
Test Conditions
Units
1 Form A
50 Ω Coaxial
COIL SPECS.
Nom. Coil Voltage
VDC
5 12
Max. Coil Voltage
VDC
6.5 15.0
+/- 10%, 25° C
Ω
100 400
Operate Voltage
Must Operate by
VDC - Max.
2.5 6.7
Release Voltage
Must Release by
VDC - Min.
0.4 1.0
Coil Resistance
CONTACT RATINGS
Switching Voltage
Max DC/Peak AC Resist.
Volts
200
Switching Current
Max DC/Peak AC Resist.
Amps
0.5
Carry Current
Max DC/Peak AC Resist.
Amps
1.5
Contact Rating
Max DC/Peak AC Resist.
Watts
10
Life Expectancy-Typical1
Signal Level 1.0V, 10mA
x 106 Ops.
1000
Static Contact
Resistance (max. init.)
50mV, 10mA
Ω
0.150
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.200
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
1012
Capacitance - Typical
Across Open Contacts
No Shield
Shield Floating
Shield Guarding
pF
pF
pF
1.0
0.2
Open Contact to Coil
No Shield
Shield Floating
Shield Guarding
pF
pF
pF
2.0
0.4
Contacts Open, Shield Floating
pF
2
Dielectric Strength
(minimum)
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
VDC/peak AC
VDC/peak AC
VDC/peak AC
250
500
500
Operate Time - including
bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec.
0.40
msec.
0.10
RELAY SPECIFICATIONS
Contact to Coil
Release Time - Typical
Top View:
Dot stamped on top of relay refers to pin #1 location
Notes:
2 4 6
1 3 6
Consult factory for life expectancy at other switching loads.
2
Surface mount component processing temperature: 500°F / 260°C max for 1 minute dwell time. Temperature measured on leads where lead exits molded package.
1
Environmental Ratings:
Storage Temp: -35°C to +125°C; Operating Temp: -20°C to +125°C
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
fax (401) 942.0920
|
www.cotorelay.com
COTO TECHNOLOGY, INC.
17092013