9862 SURFACE MOUNT REED RELAYS PR EL IM IN AR Y 9862 Series Surface Mount Reed Relays Ideally suited to the needs of Automated Test Equipment, Instrumentation and Telecommunications requirements, Coto’s 9814 & 9852 Series is a miniature Surface Mount Reed Relay that combines small size with exceptional RF performance. The 9814 extends life at ATE loads 3X or more utilizing Coto’s proprietary switch technology. The external Magnetic Shield reduces interaction between parts in high density boards. The 9852 adds Form C capability. Small size plus added features allow for high density packing, and make these relays ideal for designs such as high speed, high pin count VLSI testers where high speed, small size and high performance are all needed. 9862 Series Features u Available in Gull wing and “J” lead configurations u Tape and Reel packaging available u High reliability, hermetically sealed contacts for long life u High Insulation Resistance - 109 Ω minimum u Coaxial shield for 50 Ω impedance u 4.0 GHz NO cont; 3.2 GHz NC cont u External Magnetic Shield u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9862 .400 (10.16) .040 (1.02) TYP .015 TYP .210 MAX (0.38) (5.33) .440 MAX (11.17) .210 (5.33) MAX. Gull Wing2 NOTE u For RF Graph Performance, see “RF Graphs” section of the Reed Relay Technical & Application Information .220 (5.58) .375 (9.52) .380 (9.65) .020(.508) J-Lead2 Ordering Information Part Number 9862-05-XX Lead Style 00 = Gull Wing 20 = J- Lead 01172014 (401) 943.2686 | MODEL NUMBER Parameters 9862 Test Conditions Units 1 Form C 50 Ω Coaxial COIL SPECS. Nom. Coil Voltage VDC 5 Max. Coil Voltage VDC 6 +/- 10%, 25° C Ω 70 Operate Voltage Must Operate by VDC - Max. 3.8 Release Voltage Must Release by VDC - Min. 0.4 PR EL IM IN AR Y Coil Resistance CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 30 Switching Current Max DC/Peak AC Resist. Amps 0.1 Carry Current Max DC/Peak AC Resist. Amps 0.2 Contact Rating Max DC/Peak AC Resist. Watts 3 Signal Level 1.0V, 10mA x 106 Ops. 100 N/C 200 N/O Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.150 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.150 Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH Ω 109 Capacitance - Typical Across Open Contacts No Shield Shield Floating Shield Guarding pF pF pF 1.0 Open Contact to Coil No Shield Shield Floating Shield Guarding pF pF pF 1.0 Life Expectancy-Typical1 RELAY SPECIFICATIONS Closed Contact to Coil Shield Guarding pF 0.5 Contacts Open, Shield Floating pF - Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 200 1000 1000 Operate Time - including bounce - Typical At Nominal Coil Voltage, 30 Hz Square Wave msec. 1.0 Contact to Shield Release Time - Typical 9802 msec. Top View: Dot stamped on top of relay refers to pin #1 location 2 4 6 8 9852 1.0 2 4 6 8 Notes: 1 2 Consult factory for life expectancy at other switching loads. Contact resistance 2.0Ω defines end of life. Surface mount component processing temperature: 500°F / 260°C max for 1 minute dwell time. Temperature measured on leads where lead exits molded package. 1 3 5 7 1 3 5 7 Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +65°C All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 01172014 fax (401) 942.0920 | www.cotorelay.com COTO TECHNOLOGY, INC.