FRS12000 miniature screened 5A, 2kV TM Screened Coil for Low RF Loss 5A Carry current (up to 30MHz) Ideal for HF Antenna Tuning Applications Full Customising Facility CONTACT High current capability is achieved through the use of two reed switches in parallel. Open frame and covered construction are available, depending on voltage isolation requirements. The series uses materials with exceptional RF and temperature performance characteristics. The coils are partially screened, offering extended RF performance over the HF band. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Contact Specification unit condition Contact material Switch action Carry Current max A RMS@30MHz Switching Current A CONDITIONS DC max UNITS Switching Power W max Switching Voltage V max Isolation kV DC max Capacitance pF coil/screen gnd Contact connections pin position Lifetime operations dry switching Contact Resistance mW max (typical) insulation Resistance mW max (typical) ESR at 4.5A, 30MHz mW typical Coil at 20ºC Operating Voltage Operating Voltage Must Operate Voltage Must Release Voltage Resistance RF Screening RF Screening Connection Coil Connection Relay Construction Operate Time Release Time Isolation Contact to all other terminals Isolation Contact to Screen Capacitance Contact to all other terminals Environmental Storage Temperature Operating Temperature Shock Bump Vibration Weight V Nominal V Range V V W Nominal pin position pin position FRS12030 Rhodium SPNO 5* 0.5 FRD13506 10 20 0.5 0.3 5&8 109 80 (30) 1010 (1013) 90 24 19-31 15 2 1150 Partial 17 3 & 11 FRS12208 Rhodium SPNO 5* 0.5 FRD13503 10 20 2 0.3 5 & 12 109 80 (30) 1010 (1013) 90 24 19-30 15 4 1000 Partial 15 4 & 13 ms ms Open Frame max incl bounce 2 max incl bounce 1 Covered 2 0.5 kV DC max 0.5 2 kV DC max 0.5 0.5 pF contact open 2.5 3.0 ºC ºC g g g gm range limited current* 11ms ½ sine peak 6ms ½ sine peak 60-500Hz typical 7 -55 to +125 -40 to +85 100 40 20 7 *see graphical data overleaf Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. FRS12000 miniature screened 5A, 2kV TM Many other variants in the FRS12000 family are available with different coil and contact confgurations, as well as a number of pin footprints for drop-in replacements. FRS12030 FRS12208 Max Current vs. Frequency Max Current vs. Frequency 6 6 5 5 Current (A) Current (A) 4 4 3 20°C 65°C 2 3 2 20°C 85°C 65°C 1 1 85°C 0 0 5 10 15 20 25 0 30 0 Frequency (MHz) 5 10 15 20 25 30 Frequency (MHz) Mechanical Dimensions All dimensions are in millimeters (inches) FRS12030 30.60 (1.20“) 11.50 10.4max. (0.15“) (0.41“) 2.54 (0.1“) 22.86 (0.9“) 17 3 5 11 2.54 (0.1“) 2.54 (0.1“) 3.0 (0.12") 5.0 (0.20") PIN SIZE : 3, 11 & 17 0.635mm(nom)square 5&8 0.7mm(nom)dia. 8 FRS12208 29.0max (1.14“) 12.6max (0.50“) 11.5 (0.45“) PIN SIZE : 4, 13, 15 0.635mm(nom)square 5, 12 0.7mm(nom)dia. 25.4 (1.0“) 5.0 (0.2“) 3.0 (0.12") 5.0 (0.20“) 5.08 (0.2“) 4 12 15 5 13 2.54 (0.1“) 2.54 (0.1“) Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.