Download the datasheet 128.33 KB

FRD13000
Fully Screened 6A, 9kV Reed Relay
TM
A complete RF screen around the coil assembly
for a low loss transmission path, results in better
carry current at elevated temperatures for this open
frame series. An anti-corona sleeve is tted around
the reed switch for improved RF voltage isolation.
This type is widely used in HF Antenna Tuning Unit
(A TU) applications.
New Fully Screened Coil for Low RF Loss
Up to 9kVDC and 6A at 30MHz
Ideal for HF Antenna Tuning Applications
Customising Facility
A vailable as Form A (SPNO) or Form B (SPNC)
contact congurations.
CONTACT
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Action (form A, B or Latching)
Switching Voltage
Switching Current
Carry Current
Isolation
Isolation
Capacitance
Lifetime
Contact Resistance
Insulation Resistance
ESR at 4.5A, 30MHz
COIL at 20°C
Nominal W orking Voltage
Must Operate
Must Release
Nominal Resistance
RF Screening
RF Screening Connection
Coil Connections
RELAY
Operate time (incl. bounce)
Release time
Isolation contact to
all other terminals
Isolation coil to screen
Capacitance contact
to all other terms
ENVIRONMENTAL
Storage temperature range
Operating temperature range
Shock
Bump
Vibration
W eight
UNITS
CONDITIONS
FRD13506
FRD13503
FRD13504
V
A
A
kV
kV
pF
operations
mOhms
Ohms
mOhms
DC max
DC max
RMS at 30MHz max
DC max
RF peak (F=2MHz)
coil/screen gnd
dry switching
maximum (typical)
minimum (typical)
typical
A
20
1
6
9
8
0.5
109
50 (15)
1010 (1013)
30
A
20
1
6
9
8
0.5
109
50 (15)
1010 (1013)
30
B
20
1
6
9
8
0.5
109
50 (15)
1010 (1013)
30
VDC
VDC
VDC
Ohms
max
min
+/10%
12
9
2
98
Full
2&5
1&6
24
15
3
900
Full
2&5
1&6
24
16
3
900
Full
2&5
1(+) & 6
3
1
3
1
1
3
pin position
pin position
mS
mS
kV
DC max
9
9
9
kV
DC max
0.5
0.5
0.5
pF
contacts open
1.5
1.5
1.5
°C
°C
g
g
g
gm
Limited current*
11ms 1/2 sine pk
6ms 1/2 sine pk
10- 500Hz
20
55 to +125
-40 to +85
100
40
10
20
23
Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0
Email:[email protected]
ISO9001 C E R T I F I E D
www.cynergy3.com
FRD13000 2016
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
FRD13000
Fully Screened 6A, 9kV Reed Relay
TM
FRD13000 Series
Max Current vs Frequency
8
7
Current (A)
6
5
4
3
65°C
2
85°C
1
0
0
5
10
15
20
25
30
Frequency (MHz)
Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0
Mechanical Dimensions
All dimensions are in millimeters (inches)
63.5 Max
(2.50")
4.1
0.15”
20 (Max)
(0.79")
15.20
(0.60")
PIN SIZE
PINS 1, 2, 3, 4, 5 & 6 O 0.80
cynergy3
3
FRD13501
5
53.0 (Max)
(2.08")
2
1 +VE
38.1
(1.50")
4
Date
6
Pin 1 is +VE on Form B
45.0 (Max)
(1.77")
20.0 (Max)
(0.79")
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Email:[email protected]
ISO9001
CERTIFIED
www.cynergy3.com
© 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
Similar pages