FRS22012 SLR3 series Miniature Latching, 1.5A,3.5kV, Reed Relay TM Bistable Latching relay 1.5A Carry current (up to 30MHz) 3.5kV DC Isolation 0.5ms Coil pulse length version CONTACT Latching RF relay designs for manpack, portable HF radio systems, from 1-30MHz, where power resources are limited and board space is at a premium. These relays have separate set and reset coils to simplify board design. Capable of carrying up to 1.5A current at 30MHz and withstanding either 1.5, 3 or 3.5kV between contacts. The FRS22012 is a fast latching relay with both RF and magnetic screening, that enables switching with coil pulse lengths down to 0.5ms.**1 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Contact Specification unit condition FRS22012 Contact material Rhodium Switch action Bistable Carry Current max A RMS@30MHz 1.5 Switching Current A DC max 0.5 UNITS CONDITIONS FRD13506 Switching Power W max 10 Switching Voltage V max 20 Isolation kV DC max 3.5 Capacitance pF coil/screen gnd 0.2 Contact connections pin position 3&4 Lifetime operations dry switching 109 Contact Resistance mW max (typical) 80 (30) insulation Resistance mW max (typical) 1010 (1013) ESR at 1.5A, 30MHz mW typical 400 Coil at 20ºC Operating Voltage V Resistance W RF Screening RF Screening Connection Coil Connections Set Reset Relay Construction Pulse Length ms Operate Time ms Isolation Contact to all other terminals kV Isolation Contact to Screen kV Capacitance Contact to all other terminals pF SLR305SD01 Rhodium Bistable 1.5 0.5 FRD13503 10 20 1.5 <1 3&4 109 80 (30) 1010 (1013) 400 SLR305SD02 Rhodium Bistable 1.5 0.5 10 20 3.0 <1 3&4 109 80 (30) 1010 (1013) 400 Nominal 12 5 5 Nominal 300 None 300 None pin position pin position pin position 500 Partial 7 5 & 6 (+) 1 & 2 (+) 5 & 6 (+) 1 & 2 (+) 5 & 6 (+) 1 & 2 (+) Minimum diode fitted Covered 0.5 0.5 Open Frame 2 2 Open Frame 2 2 DC max 4 4 4 DC max 250 250 250 contact open 2.5 2.5 2.5 Environmental Storage Temperature Operating Temperature ºC ºC range range Weight gm typical -55 to +125 -40 to +85 11 7 7 Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com FRS22000 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. FRS22012 SLR3 series Miniature Latching, 1.5A,3.5kV, Reed Relay TM Mechanical Dimensions All dimensions are in millimeters (inches) FRS22012 12.0 (0.47“) 10.16 (0.40“) 25.4 (1.00“) 1 2 5 6 4.0 (0.30“) 10.16 (0.40") (0.15") MAGNET 14.0 (0.55“) 4 3 7 7.62 Pins 3 & 4 Pins 1, 2, 5 & 6 Pin 7 E.M. Shield 5 +RESET 6 3 4 1 +SET 30.6 Pin Size 1.0 (0.039")dia. 0.7 (0.026")dia. 1.0 x 1.0 Square(0.039“) 2 7 E.S. Shield E.S. Shield CIRCUIT DIAGRAM (VIEWED FROM UNDERSIDE) (1.20“) SLR3 series 31.00 15.00 Max 3.50 ±0.5 0.50 ±0.3 11.00 22.86 27.94 MAGNET 6 2.54 5.08 4 3 10.16 5 +RESET 3 2 5 6 7.00 4 E.M. Shield 1 +SET CIRCUIT DIAGRAM (VIEWED FROM UNDERSIDE) 1 2 Pins 4 & 3 Æ1.00 Max Pins 1,2,5 & 6 Æ0.65 Nom All dimensions in millimeters, with a tolerance of ±0.20mm unless otherwise stated. Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.