www.osram.com/prevaled introduction December 2013 PrevaLED® Bar Value Light Engines • • • • Benefits 590lm on 132mm 845lm on 200mm 1100lm on 280mm 2200lm on 560mm • • • • • • • • • • Efficacy: up to 135 lm/W Homogeneous light distribution Consistent white light of 4 SDCM Poke-in connectors for 0,5mm² wire No special connection cable needed Self-cooling Average lifetime 50.000h SELV module for easier fixture design UL, CE, VDE under approval 5 years system warranty in combination with suitable OPTOTRONIC drivers Applications • Office (workplace illumination, corridor) • Residential Basic description* Product name Flux (lm) CCT (K) CRI SDC M If (mA) P (W) Module Tc 55°C lm/W* Module Tc 55°C L70 B50** (h) PLVG1-Bar-590-830-132x48-DC 550 3000 > 80 4 103 5 121 50.000 PLVG1-Bar-590-840-132x48-DC 595 4000 > 80 4 103 5 131 50.000 PLVG1-Bar-845-830-200x48-DC 785 3000 > 80 4 181 6 124 50.000 PLVG1-Bar-845-840-200x48-DC 850 4000 > 80 4 181 6 134 50.000 PLVG1-Bar-1100-830-280x48-DC 1025 3000 > 80 4 255 8 126 50.000 PLVG1-Bar-1100-840-280x48-DC 1100 4000 > 80 4 255 8 135 50.000 PLVG1-Bar-2200-830-560x48-DC 2055 3000 > 80 4 380 17 123 50.000 PLVG1-Bar-2200-840-560x48-DC 2210 4000 > 80 4 380 17 132 50.000 Due to the special conditions of the manufacturing processes of LED the typical data of technical parameters can only reflect statistical figures and do not necessarily correspond to the actual parameters of each single product which could differ from the typical data. * Typical value; tolerance for optical and electrical data: +/-10% **average Lifetime L70B50 (lumen maintenance) up to 50.000h at Tc = 55°C with typical current PrevaLED Bar Value, April 2014 page 1 of 4 Electrical parameters Product name Vf (V) If max (mA) P max (mA) Flux (lm) lm/W* Module PLVG1-Bar-590-830-132x48-DC 44 140 6 725 121 PLVG1-Bar-590-840-132x48-DC 44 140 6 780 130 PLVG1-Bar-845-830-200x48-DC 35 290 11 1197 109 PLVG1-Bar-845-840-200x48-DC 35 290 11 1289 117 PLVG1-Bar-1100-830-280x48-DC 32 430 15 1681 112 PLVG1-Bar-1100-840-280x48-DC 32 430 15 1810 121 PLVG1-Bar-2200-830-560x48-DC 44 570 26 3039 117 PLVG1-Bar-2200-840-560x48-DC 44 570 26 3273 126 * Performance data at Tc = 55°C Minimum and Maximum Ratings Product Storage temperature [ °C ] Tc max.* (@ typ. current) L80 B50 @ Tc max. 85°C -30 … +80 85°C tbd h PLVG1-BAR-xx00-8x0-xxx-DC The modules are designed for operation with OTp OPTOTRONIC® ECG. *) Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the light engine. The temperature of the LED module must be measured at the tc-point according to EN60598-1 in thermally settled conditions with a temperature sensor. For exact location of the Tc -point see drawing below. Drawings PLVG1-Bar-590-8x0-132x48-DC PLVG1-Bar-845-8x0-200x48-DC PrevaLED Bar Value, April 2014 page 2 of 4 PLVG1-Bar-1100-8x0-280x48-DC PLVG1-Bar-2200-8x0-560x48-DC All dimensions: General tolerances: mm +/-0.15 if not specified Safety Information The LED module itself and all its components must not be mechanically stressed. When handling the module without use of mountain screws avoid excessive force on the cover as it may be separated from the PCB. The integrated mounting and locking mechanism on the cover of the module is intended to center and lock a reflector. Excessive force on this mechanism may cause permanent damage to the module. The modules are intended for operation only with matching OPTOTRONIC® of OTp series. To also ease the luminaire/installation approval, electronic control gear for LED or LED modules should carry the CE mark and be ENEC certified. In Europe the declarations of conformity must include the following standards: CE: EC 61347-2-13, EN 55015, IEC 61547 and IEC 61000-3-2 - ENEC: 61347-2-13 and IEC/EN 62384. Also check for the mark of an independent authorized certification institute. Please see the relevant brochure for more detailed information (see "Related and Further Information") OSRAM OPTOTRONIC® electronic control gear complies to all relevant standards and guarantees safe operation. Installation of LED modules (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. Pay attention to standard ESD precautions when installing the module. Important information on photobiological safety is available in the application guide. Eye Security EN 62471, Risk Group 1 Max. voltage U-OUT = 60V Assembly Information For optimum cooling a thermally conducting layer should be applied between module and heat sink. Further details and recommendation for mounting can be found in the application guide. PrevaLED Bar Value, April 2014 page 3 of 4 Ordering codes Product group Product name PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value PrevaLED Bar Value *) EAN: reservation PLVG1-Bar-590-830-132x48-DC PLVG1-Bar-590-840-132x48-DC PLVG1-Bar-845-830-200x48-DC PLVG1-Bar-845-840-200x48-DC PLVG1-Bar-1100-830-280x48-DC PLVG1-Bar-1100-840-280x48-DC PLVG1-Bar-2200-830-560x48-DC PLVG1-Bar-2200-840-560x48-DC EAN * S-Unit * 4052899 134065 4052899 134126 4052899 134188 4052899 134287 4052899 133822 4052899 133884 4052899 133945 4052899 134003 40 x 1 40 x 1 40 x 1 40 x 1 40 x 1 40 x 1 40 x 1 40 x 1 S-Unit: products per shipping unit (subject to change) Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves. Sales and Technical Support OSRAM GmbH Marcel-Breuer-Straße 6 D-80807 München Germany Sales and technical support is given by the local OSRAM subsidiaries. On our world wide homepage all OSRAM subsidiaries are listed with complete address and phone numbers. www.osram.com +49 89 6213-0 Related and Further Information PrevaLED® Application Guide www.osram.com/prevaled-linear OPTOTRONIC® Technical Guide www.osram.com/ecg-downloads OPTOTRONIC® Data Sheets http://catalog.myosram.com PrevaLED Bar Value, April 2014 page 4 of 4