MB12S thru MB110S ® Pb MB12S thru MB110S Pb Free Plating Product 1.0 Ampere Surface Mount MDS/MD-S Schottky Bridge Rectifiers MDS/MD-S FEATURES Surge overload rating - 30 Amperes peak Ideal for printed circuit board ● Reliable low cost construction utilizing molded ● Schottky barrier rectifier diode chip device ● Polarity symbols molded on body ● .275(7.0)MAX ● .067(1.7) .165(4.2) .150(3.8) .057(1.3) .051(1.3) .035(0.9) MECHANICAL DATA Case : MDS/MD-S Package, Molded Plastic Epoxy : Device has UL flammability classification 94V-0 ● Mounting Position : Any ● Weight : 0.22 grams (approx.) ● Marking : Type Number ● .014(.35) .031(0.8) .019(0.5) .106(2.7) .09(2.3) ● .043(1.1) .006(.15) .027(0.7) .067(1.7) .057(1.3) .193(4.9) .177(4.5) .106(2.7) .09(2.3) 1 2 3 4 *New* .008(0.2) assemble Dimensions in inches and (millimeters) 4PCS SMA/DO-214AC Maximum Ratings 1PCS MDS/MD-S @TA=25°C unless otherwise specified Parameter Symbol MB12S MB14S MB16S MB18S MB110S Unit Maximum repetitive peak reverse voltage VRRM 20 40 60 80 100 V Maximum RMS voltage VRMS 14 28 42 56 70 V Maximum DC blocking voltage VDC 20 40 60 80 100 V Maximum Average forward output current Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IF(AV) 1.0 A IFSM 30 A Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at TA=25 rated DC blocking voltage per leg TA=100 Typical thermal resistance per leg(Note1) Operation junction temperzture range Storage temperature range VF IR 0.50 0.70 0.85 0.5 mA 20 RθJA 88 RθJL 28 Tj -55 to +150 TSTG -55 to +150 V /W Notes: 1. Thermal resistance form junction to ambient and from junction to lead P.C.B. mounted on 0.2×0.2"(5.0×5.0mm) copper pad areas. Page 1/2 © 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/ MB12S thru MB110S ® Page 2/2 © 2006 Thinki Semiconductor Co.,Ltd. http://www.thinkisemi.com/