Data Sheet for Compact PCI Standard Backplanes This document is applicable to all ERNI Standard Compact PCI Backplane (catalogue products) offerings if not specified differently in a product’s respective individual data sheet or if not agreed upon explicitly with a customer. Customer-specific variants either by component population or through PCB layout modifications are explicitly included hereby. For additional details also consult respective product data sheet as well. All backplane products are designed to meet following specifications. Specific conditions of an application may heavily impact a products performance in the field. Customers are recommended to attempt type testing on the system level. Environmental Operating temperature range: Storage temperature range: Humidity: Climatic conditions: -40°C to 85°C -40°C to 105°C max. 95% non-condensing according to IEC60068-1: 25/085/21 Mechanical Flammability Class of PCB: UL 94 V-0 Flammability Class of Connectors: UL 94 V-0 Vibration/Shock: according to DIN41640 part 15: 10Hz – 500Hz 5g rms According to IEC60512: 10Hz – 2000Hz 20g rms Impact (10 impacts per axis x, y, z), 100g, 6ms Impact (10 impacts per axis x, y, z), 50g, 11ms Mating cycles of PCI connectors: IEC 61076-4-101 class 2, ≥ 250 mating cycles Mating force of PCI connectors: max. 0,8 N per contact Withdrawal force of PCI connector: min. 0,15 N per contact Dimensions: Compliant to PICMG 2.0 Rev. 3.0 and IEC 60297-3-101 Thickness of PCB: 3,9 mm +/-10% Electrical Specifications: PICMG 2.0 Compact PCI Core Specification PICMG 2.1 Compact PCI Hot Swap Specification PICMG 2.6 Bridging Specification PICMG 2.9 System Management Bus Spec. PICMG 2.10 Keying Specification Characteristic impedance (PCI): 65 Ohms +/-10%, stripline (all signals shielded on inner layers) not considered suitable for non-SELV applications; inquire for details Rear I/O creepage These backplanes may utilize tantalum capacitors for decoupling of 3.3V, 5V, -12V and +12V. 01.02.11E R02 Data sheet cPCI Standard Backplanes R02.doc 1/2 Manufacturing Practice PCB production IPC-6012 class 2 PCB acceptance IPC-A-600 class 2 Soldered electrical & electronic assemblies J-STD-001 class 2 Electronic assembly’s acceptance IPC-A-610 class 2 Cable and wire harness assemblies’ acceptance IPC-A-620 class 2 01.02.11E R02 Data sheet cPCI Standard Backplanes R02.doc 2/2