1.27 mm Connectors

SMC
1.27 mm Connectors
Ed. 08 | 09.2014
Full-scale SMC 50 Pins
Catalog E 074473
SMC - 1.27 mm Connectors
DUAL ROW CONNECTOR
GENERAL
SMC:
Connectors for
all applications
Small Grid, Big Possibilities
Limited space and high performance demands are
characteristics of many modern electronic systems,
all of which the connectors must accommodate. There is a corresponding demand for compact, secure,
and reliable connectors, with high signal integrity and
a relatively high current-carrying capacity.
The comprehensive SMC range helps meet these requirements. The high-performance SMT connectors
come in a number of different designs, heights, and
contact densities in a 1.27 mm grid.
The basic design criteria for the SMC series include double-sided spring contacts for top-rate contact properties and maximum contact reliability, a
2
Catalog E 074473
high-temperature resistant insulator with polarization
and insertion chamfers, and a very high mating reliability.
The perfect contact design exhibits a virtually continuous impedance profile and enables secure data
transmission rates of up to 3 Gbit/s (differential) if the
system is suitably designed.
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
CONCEPT
FEATURES
Pitch
1.27 mm
No. of Pins
12, 16, 20, 26, 32, 40, 50, 68, 80
Termination technology
SMT, individual variants in Pressfit technology
Applications
Data rate up to 3 Gbit/s
Current rating up to 1.7 A per contact
Board-to-board connections:
- stacked (Mezzanine)
- orthogonal
- coplanar
Wire-to-Board connections (ribbon cable):
- pluggable
- permanent
Connectors
Male connectors, vertical and right angle
Female connectors, vertical and right angle
Board-to-Board adapter
Board-on IDC
Cable assemby:
- Female connectors IDC, right angle
Special versions
Lockable connectors
Pressfit male connectors
Reduced locating pegs / without pegs
First mate/early break contacts
Catalog E 074473
09/14
Edition 8a
www.erni.com
3
SMC - 1.27 mm Connectors
CONCEPT
CAPABILITIES
Stacked
boards
(Mezzanine)
Board-to-board
adapter: enhanced
board-to-board
heights
Extender card
(coplanar)
4
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
CONCEPT
CAPABILITIES
Orthogonal
boards
Wire-to-board
(pluggable)
Wire-to-board
(permanent):
Board-on IDC
Catalog E 074473
09/14
Edition 8
www.erni.com
5
SMC - 1.27 mm Connectors
ADVANTAGES
HIGH RELIABLE CONTACT DESIGN
• ultra-reliable, dual-beam female contact
• twisted contact tulip (90°)
• rolled, homogeneous surface, guarantees secure contact mating
• wide contact surfaces between the mated pairs
• extremely low surface roughness minimizes
abrasion
• low contact resistance
POLARIZATION / MATING FACE
• mating face polarization prevents mismating and
incorrect connection
• insertion chamfers in the capture range ensure
secure mating
• distinctive guide elements for precise insertion
6
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
ADVANTAGES
ROBUST SOLDER CLIPS
• outstanding retention forces on the circuit board
• soldering brackets absorb mechanical stress
and are able to withstand high shock and vibration loads
• documented shear and tear-off forces build
trust in surface-mounted connectors (e.g., shear
force: min. 1000 N; tear-off force: min. 100 N)
INTERLOCKING SNAP-IN
• lockable PCB and cable connectors
• secured against heavy vibration and shock
loads
• snap-in: locking when mating; can only be released with tools
• cable connector: integrated locking lever; can
be manually released without tools
• protection against accidental release of wire-toboard connections
• cable guide ensures strain relief
Catalog E 074473
09/14
Edition 8
www.erni.com
7
SMC - 1.27 mm Connectors
ADVANTAGES
SNAP-IN B-TO-B ADAPTER
• single-sided locking of board-to-board adapters
on low-profile female connectors
• enables the mating and release of two boards
always on one specified side
LOCATING PEGS
• geometrically heterogeneous locating pegs for
precise positioning on the circuit board
• enables best possible compensation of PCB
holes for both positive and negative tolerances
8
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
PROCESSING
TAPE AND REEL PACKAGING
transport safe packaging
and fully automatic assembly
FULLY AUTOMATIC ASSEMBLY AND REFLOW SOLDERING
for efficient processing on
modern assembly lines
Catalog E 074473
09/14
Edition 8
www.erni.com
9
SMC - 1.27 mm Connectors
PROCESSING
BACKSIDE REFLOW SOLDERING
capable of two sided reflow
soldering
PERMANENT WIRE-TO-BOARD CONNECTION (BOARD-ON IDC)
automated and cost-efficient
assembly of ribbon cables
10
Catalog E 074473
09/14
Edition 8a
www.erni.com
SMC - 1.27 mm Connectors
BOARD-ON IDC
PERMANENT WIRE-TO-BOARD CONNECTION
fully automated
assembly
press-in without
special tool
Catalog E 074473
09/14
Edition 8
feeding of the ribbon cable and cable
guide
processed connection
www.erni.com
11
SMC - 1.27 mm Connectors
MATING CONDITIONS
ALLOWED INCLINATION FOR A SECURE SELF-CENTERING
1)
1) depends on No. of Pins and misalignment tolerance
ALLOWED MISALIGNMENT TOLERANCES FOR A SECURE SELF-CENTERING
12
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
BOARD-TO-BOARD HEIGHT
STACKED BOARDS / MEZZANINE
Board-to-Board
Height
09/14
Female
Stacking Height
8.00 - 9.50 mm
1.75
6.25
9.50 - 11.0 mm
3.25
6.25
10.80 - 12.30 mm
1.75
9.05
12.30 - 13.80 mm
3.25
9.05
13.90 - 15.40 mm
4.85
9.05
15.40 - 16.90 mm
1.75
13.65
16.90 - 18.40 mm
3.25
13.65
18.50 - 20.00 mm
4.85
13.65
Board-to-Board
Height
Catalog E 074473
Male
Stacking Height
Edition 8a
Board-to-Board
Adapter
Female
Stacking Height
20 mm
20
2 x 6.25
22 mm
22
2 x 6.25
24 mm
24
2 x 6.25
26 mm
26
2 x 6.25
28 mm
28
2 x 6.25
30 mm
30
2 x 6.25
32 mm
32
2 x 6.25
34 mm
34
2 x 6.25
36 mm
36
2 x 6.25
38 mm
38
2 x 6.25
40 mm
38 (reduced wipe
length)
2 x 6.25
www.erni.com
13
SMC - 1.27 mm Connectors
CHARACTERISTICS
TECHNICAL DATA
Description
Standard
PCB Connectors, Cable Assemblies, B-to-B Adapter
Climate category
DIN EN 60068-1
test b
55 / 150 / 56
55 / 125 / 56
-55 / 125 °C (PCB Connectors)
-55 / 105 °C (Cable Assemblies)
-55 / 105 °C
Temperature range
Current rating per contact
IEC60512 test 5b
Board-on IDC (Ribbon Cable
AWG 30, 250 mm)
12-pin version at 20 °C ambient temperature:
1.7 A (up to 2.7 A with optimized layout)
Air- and creepage distance
contact - contact min. 0.4 mm
The permissible operating voltages depend on the customer application and on the applicable or specified safety requirements.
Insulation coordination according to IEC 60664-1 has to be regarded for the complete electrical device. Therefore, the maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole current
path. In practice, reductions in creepage or clearance distances
may occur due to the conductive pattern of the printed board or
the wiring used, and have to be taken into account separately.
As a result the creepage and clearance distances for the application may be reduced compared to those of the connector.
Operating voltage
IEC 60664
Dielectric strength
IEC 60512 test 4a
Contact resistance
IEC 60512 test 2a
Insulation resistance
IEC 60512 test 3a
> 104 MΩ
Vibration, sine
IEC 60512 test 6d
10 – 2000 Hz
20 g
Contact disturbance
(while vibration test)
IEC 60512 test 2e
< 1 µs
Shock halfsine
IEC 60512 test 6c
50 g
11 ms
Contact disturbance
(while shock test)
IEC 60512 test 2e
< 1 µs
14
Catalog E 074473
contact - contact 500 Vrms
< 25 mΩ
< 10 mΩ (cable assemblies)
09/14
Edition 8
< 10 mΩ
www.erni.com
SMC - 1.27 mm Connectors
CHARACTERISTICS
Description
Standard
PCB Connectors, Cable Assemblies, B-to-B Adapter
Board-on IDC (Ribbon Cable
AWG 30, 250 mm)
Mechanical operation
IEC 60512 test 9a
500 mating cycles
Insertion and withdrawal
force max.
IEC 60512 test 13b
0.5 N per contact
Gauge retention force
IEC 60512 test 16e
> 0.1 N
Processing Conditions
Hand soldering
temperature max.
IEC 60068-2-20
3.5 s at 350 °C
Dip soldering
temperature max.
IEC 60068-2-20
10 s at 260 °C
Reflow soldering
temperature max.
JEDEC
J-STD-020
20 - 40 s at 260 °C
Coplanarity
< 0.1 mm
Housing Material
Insulation body
LCP
CTI value
IEC 112
175
UL flame rating
UL 94 V-0
UL file plastic material
E83005
Contact Material
Base material
Cu alloy
Mating area
gold plating
Termination area
–
Sn
Environment Compatibility
Recycling
no flame-retardent additives, no toxic additives allow easy recycling
Product Approval
UL/CSA
Catalog E 074473
E84703
09/14
Edition 8a
www.erni.com
15
SMC - 1.27 mm Connectors
CABLE CHARACTERISTICS
0,64
TECHNICAL DATA FLAT RIBBON CABLES
0,635
Description
Standard cable
(PVC)
High Temperature Cable
(TPE-S)
Cross section
Halogen-free Cable
(Polyolefin TPE-O)
AWG-30/ 7/ 0.06 mm2
Conductor
stranded Cu wire, tinned, 7x0.102 / 0.06 mm2
Coded wire
available
Insulation
PVC
gray (similar to RAL 78032)
TPE-S
gray (similar to RAL 78032)
TPE-O
gray (similar to RAL 78032)
min. 0.1mm
Insulation thickness
94 ±2 (Shore A)
52 ±3 (Shore D)
94 ±2 (Shore A);
50 ±3 (Shore D)
Temperature range
-20/105 °C (fixed)
-10/105 °C (mobile)
-60/125 °C (fixed)
-40/125 °C (mobile)
-40/105 °C (fixed)
-20/105 °C (mobile)
Dielectric strength
1500 Vrms
1000 Vrms
1200 Vrms
Shore hardness
Technical Data
Conductor resistance
≤ 350 Ω/km at 20 °C
Insulation resistance
≥ 20 MΩ x km at 20 °C
Impedance
125 Ω (wire-wire)
80 Ω (Ground-Signal-Ground)
Bending cycles (typical)
136 Ω (wire-wire)
min. 1 million at 20 x cable diameter
RoHS
Flame rating
16
110 Ω (wire-wire)
75 Ω (Ground-Signal-Ground)
compliant
UL 94 VW-1
Catalog E 074473
UL 1581
(Horizontal Flame Test)
IEC 60332-1-2
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
HIGH FREQUENCY CHARACTERISTICS
HIGH-SPEED DATA TRANSMISSION
SMC connectors as solution for unshielded high-speed applications. The practically continuous
impedance profile allows for secure data transmission rates of up to 3 Gbit/s (differential) if the
system is suitably designed.
• De-embedded measurement results for the micro backplane/daughter card application
• 50-pin SMC, angled female connector, straight male connector (low profile)
• Differential signal transmission
INSERTION LOSS
Ground
Signal
NEAR END CROSSTALK (NEXT)
Ground
Signal
Catalog E 074473
09/14
Edition 8
Agressor
A2_3
A2_3
A2_3
/
/
/
/
Victim
B2_3
A4_5
B4_5 (shown above)
www.erni.com
17
SMC - 1.27 mm Connectors
RIGHT ANGLE MALE
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• black insulation body for fast and reliable
visual recognition
• fully automated board assembly
DIMENSIONAL DRAWINGS 1,27
4,25
1,6
0,8
1,2
0,3
2
2,2
A
10
B
C
18
12
10.77
12.70
10.35
16
13.31
15.24
12.91
20
15.85
17.78
15.45
26
19.66
21.59
19.26
32
23.47
25.40
23.07
40
28.55
30.48
28.15
50
34.90
36.83
34.50
68
46.33
48.26
45.93
80
53.95
55.88
53.55
No. of
contacts
Catalog E 074473
A B
1,27
2,21
C
09/14
Edition 8
www.erni.com
7,6
1,27
1,27
Recommended Layout
SMC - 1.27 mm Connectors
RIGHT ANGLE MALE
ORDERING INFORMATION Catalog E 074473
No. of Pins
Packaging
Part Number
12
Tape and reel
154763
16
Tape and reel
354094
20
Tape and reel
354095
26
Tape and reel
154764
32
Tape and reel
354096
40
Tape and reel
354097
50
Tape and reel
154765
68
Tape and reel
154766
80
Tape and reel
154767
09/14
Edition 8
www.erni.com
19
SMC - 1.27 mm Connectors
RIGHT ANGLE FEMALE
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• black insulation body for fast and reliable
visual recognition
• fully automated board assembly
DIMENSIONAL DRAWINGS C
Recommended Layout
1,27
1,2
0,8
0,3
2
2,2
A
10,8
B
12
10.77
12.70
9.37
16
13.31
15.24
11.91
20
15.85
17.78
14.45
26
19.66
21.59
18.26
32
23.47
25.40
22.07
40
28.55
30.48
27.15
50
34.90
36.83
33.50
68
46.33
48.26
44.93
80
53.95
55.88
52.55
No. of
contacts
20
Catalog E 074473
A B
1,27
2,21
C
09/14
Edition 8
www.erni.com
7,6
1,27
3,85
1,27
1,6
SMC - 1.27 mm Connectors
RIGHT ANGLE FEMALE
ORDERING INFORMATION Catalog E 074473
No. of Pins
Packaging
Part Number
12
Tape and reel
154740
16
Tape and reel
354078
20
Tape and reel
354079
26
Tape and reel
154741
32
Tape and reel
354080
40
Tape and reel
354081
50
Tape and reel
154742
68
Tape and reel
154743
80
Tape and reel
154744
09/14
Edition 8
www.erni.com
21
SMC - 1.27 mm Connectors
VERTICAL MALE
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• datarate up to 3 Gbit/s
• location pegs for exact board placement
• black insulation body for fast and reliable
visual recognition
• fully automated board assembly
• 3 stacking heights (1.75, 3.25, 4.85 mm)
DIMENSIONAL DRAWINGS Unmated Stacking Height 3.25 mm
C
Recommended Layout
2,21
1,27
1,1
5,5
2,2
7,6
8,25
a1
A
0,3
1,27
7,2
1,27
B
22
12
10.77
12.70
10.37
16
13.31
15.24
12.91
20
15.85
17.78
15.45
26
19.66
21.59
19.26
32
23.47 25.40 23.07
40
28.55 30.48
50
34.90 36.83 34.50
68
46.33 48.26 45.93
80
53.95 55.88 53.55
No. of
contacts
A B C
Catalog E 074473
0,8
1,2
1,6
28.15
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
VERTICAL MALE
ORDERING INFORMATION Catalog E 074473
No. of Pins
Unmated Stacking Height
Packaging
Part Number
12
1.75
Tape and reel
244836
16
1.75
Tape and reel
254587
20
1.75
Tape and reel
254588
26
1.75
Tape and reel
244837
32
1.75
Tape and reel
254589
40
1.75
Tape and reel
254590
50
1.75
Tape and reel
244838
68
1.75
Tape and reel
244839
80
1.75
Tape and reel
244840
12
3.25
Tape and reel
244854
16
3.25
Tape and reel
254536
20
3.25
Tape and reel
254537
26
3.25
Tape and reel
244855
32
3.25
Tape and reel
254538
40
3.25
Tape and reel
254539
50
3.25
Tape and reel
244856
68
3.25
Tape and reel
244857
80
3.25
Tape and reel
244858
09/14
Edition 8
www.erni.com
23
SMC - 1.27 mm Connectors
VERTICAL MALE
No. of Pins
Unmated Stacking Height
Packaging
Part Number
12
4.85
Tape and reel
234206
16
4.85
Tape and reel
254414
20
4.85
Tape and reel
254415
26
4.85
Tape and reel
234207
32
4.85
Tape and reel
254416
40
4.85
Tape and reel
254417
50
4.85
Tape and reel
234208
68
4.85
Tape and reel
234209
80
4.85
Tape and reel
234210
24
Catalog E 074473
09/14
Edition 8a
www.erni.com
SMC - 1.27 mm Connectors
VERTICAL MALE PRESSFIT
PRODUCT SPECIFICATION • pressfit termination
• dual row connector
• data rates up to 3 Gbit/s
• black insulation body for fast and reliable
visual recognition
• fully automated board assembly
• stacking height 3.25 mm
DIMENSIONAL DRAWINGS 4,2
Recommended Layout
1,27
A
10,95
8,2
1,27
Hole Design
1,27
1,27
Catalog E 074473
09/14
Edition 8a
12
10.35
26
19.24
50
34.48
68
45.91
80
53.53
No. of
contacts
A
0,7 0,02
0,6 0,05
min. 0,05
max. 10 µm
min. 25 µm Cu
www.erni.com
25
SMC - 1.27 mm Connectors
VERTICAL MALE PRESSFIT
ORDERING INFORMATION 26
No. of Pins
Unmated Stacking Height
Packaging
Part Number
12
3.25
Tube
064002
26
3.25
Tube
064003
50
3.25
Tube
064004
68
3.25
Tube
144183
80
3.25
Tube
144185
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
VERTICAL FEMALE
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• black insulation body for fast and reliable
visual recognition
• fully automated board assembly
• 3 stacking heights (6.25, 9.05, 13.65 mm)
DIMENSIONAL DRAWINGS Unmated Stacking Height 9.05 mm
Recommended Layout
2,21
1,27
1,1
5,5
2,2
7,6
9,05
a1
A
7,2
1,27
1,27
C
10.77
12.70
9.37
13.31
15.24
11.91
20
15.85
17.78
14.45
26
19.66
21.60
18.26
32
23.47
25.40
22.07
40
28.55
30.48
27.15
50
34.90
36.80
33.50
68
46.33
48.20
44.93
80
53.95
55.80
52.55
No. of
contacts
B
Catalog E 074473
12
16
09/14
Edition 8
A B
0,3
1,2
0,8
1,6
C
www.erni.com
27
SMC - 1.27 mm Connectors
VERTICAL FEMALE
ORDERING INFORMATION 28
No. of Pins
Unmated Stacking Height
Packaging
Part Number
12
6.25
Tape and reel
154805
16
6.25
Tape and reel
354055
20
6.25
Tape and reel
354056
26
6.25
Tape and reel
154806
32
6.25
Tape and reel
354057
40
6.25
Tape and reel
204632
50
6.25
Tape and reel
154807
68
6.25
Tape and reel
154808
80
6.25
Tape and reel
154809
12
9.05
Tape and reel
154717
16
9.05
Tape and reel
354062
20
9.05
Tape and reel
354063
26
9.05
Tape and reel
154718
32
9.05
Tape and reel
354064
40
9.05
Tape and reel
354065
50
9.05
Tape and reel
154719
68
9.05
Tape and reel
154720
80
9.05
Tape and reel
154721
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
VERTICAL FEMALE
Catalog E 074473
No. of Pins
Unmated Stacking Height
Packaging
Part Number
12
13.65
Tape and reel
234198
16
13.65
Tape and reel
354070
20
13.65
Tape and reel
354071
26
13.65
Tape and reel
204763
32
13.65
Tape and reel
354072
40
13.65
Tape and reel
354073
50
13.65
Tape and reel
234199
68
13.65
Tape and reel
234200
80
13.65
Tape and reel
234201
09/14
Edition 8
www.erni.com
29
SMC - 1.27 mm Connectors
RIGHT ANGLE MALE WITH LOCKING SYSTEM
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• fully automated board assembly
• with integrated locking feature, color-coded
DIMENSIONAL DRAWINGS 1,27
1,27
2,2
7,6
2
10,77
1,6 -0,03
0,3
1,2
0,8
10
12,7
10,37
30
1,27
2,21
4,25
1,27
Recommended Layout
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
RIGHT ANGLE MALE WITH LOCKING SYSTEM
ORDERING INFORMATION Catalog E 074473
No. of Pins
Packaging
Part Number
12
Tape and reel
254273
09/14
Edition 8
www.erni.com
31
SMC - 1.27 mm Connectors
RIGHT ANGLE FEMALE WITH LOCKING SYSTEM
PRODUCT SPECIFICATION • SMT termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• fully automated board assembly
• with integrated locking feature, color-coded
DIMENSIONAL DRAWINGS 1,27
2,2
7,6
2
10,77
1,27
1,6 -0,03
0,3
1,2
12,7
0,8
9,37
32
1,27
2,21
4,25
1,27
Recommended Layout
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
RIGHT ANGLE FEMALE WITH LOCKING SYSTEM
ORDERING INFORMATION Catalog E 074473
No. of Pins
Packaging
Part Number
12
Tape and reel
254262
09/14
Edition 8
www.erni.com
33
SMC - 1.27 mm Connectors
BOARD-TO-BOARD ADAPTER
PRODUCT SPECIFICATION • Board-to-board Adapter for parallel PCB
distances of 20-40 mm
• moulded (hotmelt) versions for improved
environmental resistance and finger safe
protection
• single-sided locking of board-to-board adapters on low-profile female connectors
• enables the mating and release of two
boards always on one specified side
DIMENSIONAL DRAWINGS 1,27
5
1,27
an
B
C
A
12
26
10,37
19,26
50
68
80
34,5
45,93
53,55
No. of contacts
A
20
22
24
26
28
30
32
34
36
38
3,5
5,5
7,5
9,5
11,5
13,5
15,5
17,5
19,5
21,5
18,2
20,2
22,2
24,2
26,2
28,2
30,2
32,2
34,2
36,2
B-to-B Adapter
(Board Distance)
B
C
a1
single sided
locking
a1
34
Catalog E 074473
09/14
Edition 8a
www.erni.com
SMC - 1.27 mm Connectors
BOARD-TO-BOARD ADAPTER
ORDERING INFORMATION No. of Pins
Board Distance
Packaging
Part Number
12
20
Tray
364094
12
22
Tray
364095
12
24
Tray
364096
12
26
Tray
364097
12
28
Tray
364098
12
30
Tray
364099
12
32
Tray
364100
12
34
Tray
364101
12
36
Tray
364102
12
38
Tray
364103
26
20
Tray
364084
26
22
Tray
364085
26
24
Tray
364086
26
26
Tray
364087
26
28
Tray
364088
26
30
Tray
364089
26
32
Tray
364090
26
34
Tray
364091
Board-to-board distance 40 mm: Board-to-board Adapter 38 with reduced wipe length, on request
Catalog E 074473
09/14
Edition 8
www.erni.com
35
SMC - 1.27 mm Connectors
BOARD-TO-BOARD ADAPTER
No. of Pins
Board Distance
Packaging
Part Number
26
36
Tray
364092
26
38
Tray
364093
50
20
Tray
354307
50
22
Tray
354308
50
24
Tray
354309
50
26
Tray
354310
50
28
Tray
354311
50
30
Tray
354312
50
32
Tray
354313
50
34
Tray
354314
50
36
Tray
354315
50
38
Tray
354316
68
20
Tray
364715
68
22
Tray
354029
68
24
Tray
364717
68
26
Tray
364718
68
28
Tray
364719
68
30
Tray
364720
68
32
Tray
364721
68
34
Tray
364722
Board-to-board distance 40 mm: Board-to-board Adapter 38 with reduced wipe length, on request
36
Catalog E 074473
09/14
Edition 8a
www.erni.com
SMC - 1.27 mm Connectors
BOARD-TO-BOARD ADAPTER
No. of Pins
Board Distance
Packaging
Part Number
68
36
Tray
364723
68
38
Tray
364724
80
20
Tray
364725
80
22
Tray
364726
80
24
Tray
364727
80
26
Tray
364728
80
28
Tray
364729
80
30
Tray
364730
80
32
Tray
364731
80
34
Tray
364732
80
36
Tray
364733
80
38
Tray
354030
Board-to-board distance 40 mm: Board-to-board Adapter 38 with reduced wipe length, on request
Moulded Versions
Catalog E 074473
No. of Pins
Board Distance
Packaging
Part Number
26
24
Tray
474589
50
22
Tray
474588
09/14
Edition 8a
www.erni.com
37
SMC - 1.27 mm Connectors
BOARD-ON IDC
PRODUCT SPECIFICATION • permanent wire-to-board connection
• SMT and IDC termination
• dual row connector
• data rates up to 3 Gbit/s
• location pegs for exact board placement
• black insulation body for fast and reliable
visual recognition
• flat ribbon cables AWG 30
• easy assembly with standard toggle press
DIMENSIONAL DRAWINGS Board-on Connectors
C
Recommended Layout
3,21
1,27
0,153
0,45
0,3
1,2
0,8
1,6
12
12.77
14.70
26
21.66
23.59 20.67
11.78
50
36.90 38.83
35.91
7
2,15
1,27
No. of
contacts
A B C
B
38
Catalog E 074473
09/14
Edition 8
www.erni.com
5,5
1,1
1,35
1,72
A
2,6
7,6
5
0,305
SMC - 1.27 mm Connectors
BOARD-ON IDC
Board-on Cable Guide
4,2
3,8
A
12
10,78
26
19,67 15,87
6,98
50
34,91
31,11
No. of
contacts
A
B
ORDERING INFORMATION No. of Pins
Configuration
Packaging
Part Number
12
Connector
Tape and reel
244628
12
Cable guide
Poly bag
244631
26
Connector
Tape and reel
244629
26
Cable guide
Poly bag
244632
50
Connector
Tape and reel
244630
50
Cable guide
Poly bag
244633
Please order cable guide separately.
Catalog E 074473
09/14
Edition 8
www.erni.com
39
SMC - 1.27 mm Connectors
CABLE ASSEMBLIES
PRODUCT SPECIFICATION • cable assemblies with IDC female connectors
• ribbon cable AWG 30/7
• three different cable types
• assemblies with single wire or shielded wires are
possible (on request)
DIMENSIONAL DRAWINGS B
1,27
1,27
4,2
12
12.69
9.37
0,5 max.
16
15.23
11.91
L
13,9
A
20
17.77
14.45
26
21.58
18.26
32
25.39
22.07
40
32.53
27.15
50
38.88
33.50
68
50.31
44.93
80
57.93
52.55
No. of
contacts
40
Catalog E 074473
09/14
Edition 8
A B
www.erni.com
SMC - 1.27 mm Connectors
CABLE ASSEMBLIES
CONFIGURATIONS Standard
Connector #1
Crossed
Connector #2
Connector #2
a1
a1
A
U
A
a1
U
I
D
U
X
X
a1
a1
A
A
A
U
I
A
D
A
D
I
N
C
a1
a1
A
U
a1
Catalog E 074473
09/14
Edition 8
www.erni.com
41
SMC - 1.27 mm Connectors
CABLE ASSEMBLIES
CABLE TYPES Standard
•
•
•
•
TPE-S
High Temperature
• High temperature resistant ribbon cable with TPE-S
insulation
• AWG 30/7
• excellent abrasion and cut resistance
• flexible at low temperatures up to -50 °C
• temperature range: -60 °C to +125 °C (fixed)
TPE-O
Halogen-free
•
•
•
•
•
PVC
42
Catalog E 074473
09/14
Standard ribbon cable with PVC insulation
AWG 30/7
excellent abrasion and cut resistance
temperature range: -20 °C to +105 °C (fixed)
Halogen-free ribbon cable withTPE-O insulation
AWG 30/7
excellent abrasion and cut resistance
Oil-resistant (ASTM 2)
temperature range: -40 °C to +105 °C (fixed)
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
CABLE ASSEMBLIES
ORDERIN INFORMATION STANDARD CABLE ASSEMBLIES IDCCS _ SMC _ 1.27 _ oo _ oo _ ooo _ ooooo _ oo
Cable type
PV: Standard (PVC)
HT: High temperature (TPE-S)
HF: Halogen-free (TPE-O)
Length
in mm
Connector #2
e.g.: AUI or AUX
Connector #1
e.g.: AU
No. of Contacts
12, 16, 20, 26, 32, 40, 50, 68, 80
Example for a standard configuration:
IDCCS_SMC_1.27_12_AU_AUI_01000_PV
SMC cable assemby, 12-pin, assembled on both sides with equal connector orientation, length 1000 mm, pin assignment 1:1
Catalog E 074473
09/14
Edition 8
www.erni.com
43
SMC - 1.27 mm Connectors
PART NUMBER INDEX
44
Part Number
Page
Part Number
Page
064002
26
204763
29
064003
26
234198
29
064004
26
234199
29
144183
26
234200
29
144185
26
234201
29
154717
28
234206
24
154718
28
234207
24
154719
28
234208
24
154720
28
234209
24
154721
28
234210
24
154740
21
244628
39
154741
21
244629
39
154742
21
244630
39
154743
21
244631
39
154744
21
244632
39
154763
19
244633
39
154764
19
244836
23
154765
19
244837
23
154766
19
244838
23
154767
19
244839
23
154805
28
244840
23
154806
28
244854
23
154807
28
244855
23
154808
28
244856
23
154809
28
244857
23
204632
28
244858
23
Catalog E 074473
09/14
Edition 8
www.erni.com
SMC - 1.27 mm Connectors
PART NUMBER INDEX
Catalog E 074473
Part Number
Page
Part Number
Page
254262
33
354078
21
254273
31
354079
21
254414
24
354080
21
254415
24
354081
21
254416
24
354094
19
254417
24
354095
19
254536
23
354096
19
254537
23
354097
19
254538
23
354307
36
254539
23
354308
36
254587
23
354309
36
254588
23
354310
36
254589
23
354311
36
254590
23
354312
36
354030
23
354313
36
354055
28
354314
36
354056
28
354315
36
354057
28
354316
36
354062
28
364084
35
354063
28
364085
35
354064
28
364086
35
354065
28
364087
35
354070
29
364088
35
354071
29
364089
35
354072
29
364090
35
354073
29
364091
35
09/14
Edition 8
www.erni.com
45
SMC - 1.27 mm Connectors
PART NUMBER INDEX
46
Part Number
Page
Part Number
Page
364092
36
364720
36
364093
36
364721
36
364094
35
364722
36
364095
35
364723
37
364096
35
364724
37
364097
35
364725
37
364098
35
364726
37
364099
35
364727
37
364100
35
364728
37
364101
35
364729
37
364102
35
364730
37
364103
35
364731
37
364715
36
364732
37
354029
36
364733
37
364717
36
474588
37
364718
36
474589
37
364719
36
Catalog E 074473
09/14
Edition 8
www.erni.com
ERNI Electronics GmbH & Co. KG
Europe South America Africa Japan
Seestrasse 9
73099 Adelberg
Germany
Tel +49 7166 50-0
Fax +49 7166 50-282
inf[email protected]
www.erni.com
ERNI Electronics, Inc.
North America Canada Mexico
2201 Westwood Ave
Richmond, VA 23230/USA
Tel +1 804 228-4100
Fax +1 804 228-4099
[email protected]
ERNI Asia Holding Pte Ltd.
Asia Australia New Zealand
Blk 4008 Ang Mo Kio Avenue 10
#04-01/02 Techplace I
Singapore 569625
Tel +65 6 555 5885
Fax +65 6 555 5995
[email protected]
© ERNI Electronics GmbH & Co. KG 2014 • Printed in Germany • A policy of continuous improvement is followed and the right to alter
any published data without notice is reserved.
ERNI ®, ERNI WoR&D ®, Act. Connect. Perfect ®, MicroCon ®, MicroStac ®, MicroSpeed ®, MiniBridge ®, MaxiBridge ®, ERmet ®, ERmet ZD ®,
ERmet ZDplus ®, ERmet ZD HD ®, ERbic ®, ERNIPRESS ®, INTERact ®, BLUEcontact ® and WHITEspeed ® are trademarks (registered or
applied for in various countries) of ERNI Electronics GmbH & Co. KG.