Suntan Su ® ® W005 THRU W10 Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes WOB FEATU R E S ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347215 Mechanical Data ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% Type Number W005 W01 W02 W04 W06 W08 W10 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking Voltage Maximum Average Forward Rectified Current I(AV) 1.0 A IFSM 30 A VF 1.0 V @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25℃ Rated DC Blocking voltage per leg TA = 125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range IR 10 500 RθJA 36 RθJL 13 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Pads. μA ℃/W Copper Suntan Su ® ® W005 THRU W10 Single Phase 1.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Amperes RATING AND CHARACTERISTIC CURVES W005 THRU W10 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246