EL Series • Ratings of 5A and 10A @ 3-100 VDC • UL Recognized, CE and RoHS Compliant • 5, 12 and 24VDC control • Mosfet Output PRODUCT SELECTION Control Voltage 4-8 VDC 10-14 VDC 21-27 VDC 5A 10A EL100D5-05 EL100D5-12 EL100D5-24 EL100D10-05 EL100D10-12 EL100D10-24 OUTPUT SPECIFICATIONS (1)(3) Description Operating Voltage Range [VDC] Maximum Load Current [Adc] (2) Minimum Load Current [mAdc] Maximum Surge Current Non-Repetitive (10ms) [A] Maximum Off-State Leakage Current @ Rated Voltage [µAdc] Maximum On-State Resistance @ Rated Current (Rds-on) Maximum On-State Voltage Drop @ Rated Current 5A 10A 3-100 5 150 80 100 0.04 Ohm 0.2V 3-100 10 150 100 100 0.01 Ohm 0.1V EL100Dxx-05 EL100Dxx-12 EL100Dxx-24 4-8 VDC 4.0 VDC 0.5 VDC 13.3 mA 300 1 300 10-14 VDC 10 VDC 1.0 VDC 11.7 mA 940 1 300 21-27 VDC 21 VDC 2 VDC 11.5 mA 2K 1 300 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Typical Input Current @ nominal turn-on voltage Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] Maximum Turn-Off Time [µsec] GENERAL SPECIFICATIONS Description Dielectric Strength, Input to Output Dielectric Strength, Output to Baseplate Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Terminals Parameters 2500 Vrms 2500 Vrms -30 to 80 °C -30 to 125 °C 0.5 oz (14.4g) 3/16" input, 1/4" output QC GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) When mounted to the proper size heat sink (see derating curves) 3) Inductive loads should be diode suppressed to prevent damage to the relay. WIRING DIAGRAM MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 Rev. 120811 ANNEX - ENVIROMENTAL INFORMATION