MSAT-P25 PIN Diode Attenuator Shunt Element (2012) Plastic Molded DFN Description Features A broadband, High Linearity medium power shunt PIN Attenuator element 1.9 X 1.1 mm DFN package. This device is designed for wireless Telecommunication infrastructure and test instrument applications. It is also suited for other applications in 0.1 ~ 10 GHz range. • Low Distortion Harmonics at 85 dBc Typical • Broadband performance, beyond 10 GHz • Low Insertion loss & high attenuation range, 27 dB Electrical Specifications, TC = +25 °C SYMBOL VBR TEST CONDITIONS IR = 10 mA MIN TYPICAL MAX UNITS 200 – – V 2000 3000 5000 ns t IF = 10 mA Rs min I = 100 mA F = 500 MHz – 1.5 2.5 Rs High I = 10 mA F = 500 MHz 1200 2200 3000 Rs Low I = 1 mA F = 500 MHz 20 30 40 W W W ATTEN I = 100 mA F <10.0 GHz 20 30 – dB IR = 6 mA 10% / 90% Absolute Maximum Ratings RATING LIMITS UNITS VR 200 V IF 200 mA θJC 20 TJ +175 o TSTG -65 to +125 o TSOLDER C/W o C C +260 C per JEDEC J-STD-20C o METELICS Revision Date: 2/15/2013 1 MSAT-P25 METELICS RF Performance Attenuation vs Current 0 -5 20 µA 40 µA Attenuation, dB -10 100 uA 200 µA 400 µA -15 1 mA 2 mA 4 mA 10 mA -20 20 mA 40 mA 100 mA -25 -30 0 1 2 3 4 5 6 Frequency, GHz 7 8 9 10 RF Performance Isolation 10000 Resistance (ohms) 1000 100 10 1 0.01 0.1 1 10 Current (mA) 2 Revision Date: 2/15/2013 Aeroflex / Metelics, Inc. www.aeroflex.com/metelics 100 MSAT-P25 METELICS Package Outline (2012) and Electrical Schematic 1 2 3 1. Dimensions do not include mold flashing 2. Burrs and dumbar shall not exceed 0.002” per surface. 3. Lead co-planarity is 0.003” max Dimensions: inches [mm] PCB Layout NOTE: If possible, use copper filled vias underneath pin 3 for better thermals; otherwise, use vias that are plated through, filled and plated over. Solder mask should provide a 60 um clearance between copper pad and soldermask. Rounded pkg pads should have matching rounded solder mask openings. Use circles or squares for the thermal land stencil such that only get 50% to 80% solder paste coverage. Aeroflex / Metelics, Inc. www.aeroflex.com/metelics 3 Revision Date: 2/15/2013 MSAT-P25 METELICS Aeroflex / Metelics Inc. Aeroflex Microelectronic Solutions 975 Stewart Drive Sunnyvale, CA 94085 TEL: 408-737-8181 ISO 9001:2008 certified companies 54 Grenier Field Road Londonderry, NH 03053 TEL: 603-641-3800 Sales 888-641-SEMI (7364) [email protected] www.aeroflex.com/Microwave www.aeroflex.com/Metelics Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. Copyright 2009-2010 Aeroflex / Metelics. All rights reserved. Revision Date: 2/15/2013 4 A17103