FEED-THROUGH ➤ 44mm (1.73 in.) 35 or 32mm DIN Rail ➤ ➤ 45mm (1.77 in.) ➤ 27mm (1.07 in.) ➤ ➤ TS35x7.5 39mm (1.54 in.) TS32x15 43mm (1.70 in.) TS35x7.5 44mm (1.73 in.) TS32x15 48mm (1.89 in.) ➤ ➤ ➤ SRK2.5 RK2.5 RK1.5-4 Save installation time with our 10-Paks mm .) 60 6 in 3 (2. mm .) 50 7 in 9 (1. ➤ ➤ KBL1.5-4 TS35 x 15 TS32 x 15 60 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) TS15 x 5.5 Ratings Wire Range 0.2-2.5mm 2 22-14 AWG 22-14 AWG IEC (File No. E95701) (File No. LR42110) Current 24A 20A 20A KBL2.5 50 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 3.5mm (.138) Voltage 500V 300V 300V Wire Range 0.2-4mm2 22-10 AWG 22-10 AWG Std. Pk. Type Current 32A 30Ab 40A ➤ ➤ High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) ➤ ➤ Types SRK2.5 and RK1.5-4 feature a narrow top and reduced height, providing increased accessibility for wiring. TS35 x 7.5 ➤ 48mm (1.89 in.) ➤ 27mm (1.07 in.) ➤ For wire-to-wire connections in control, automation, instrumentation and power distribution applications. • • • • • ➤ CATALOGS FIND IT ➤ TERMINAL BLOCKS CONTENTS NEXT 60 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Voltage 500V 300V 300V Wire Range 0.2-2.5mm2 22-12 AWG 22-12 AWG Current 24A 20A 20A Voltage 800V 600V 600V Std. Pk. Cat. No. Std. Pk Type Cat. No. 1015.2 100 RK2.5 1296.2 100 Terminal Block with 2 Test Sockets RK1.5-4/2STB 1009.2 100 Terminal Block 10-Pak, 10 Pos. KBL1.5-4 1016.2 10 KBL2.5 1297.2 10 Ordering Information Type Cat. No. Terminal Block SRK2.5 1030.2 End Plate (page 58) a RK1.5-4 100 c AP2.5 2070.2 50 AP1.5-4 2738.2 50 AP2.5-10 2001.2 50 TW1.5-4 2071.2 50 TW1.5-4 2071.2 50 TW2.5-10 2002.2 50 TW2.5 2426.2 50 TRS3 2566.2 100 TRS3 2566.2 100 End Stop for 35mm Rail (page 56) for 32mm Rail (page 56)a ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 Internal Jumpers (page 62) a 2 pole 3 pole 4 pole 10 pole max. no. of poles Q21 Q31 Q41 Q101 50 50 20 10 Q23 2087.0 Q33 2088.0 Q43 2089.0 Q103 2090.0 (82, refer to page 62) 50 50 20 10 Q22 Q32 Q42 Q102 2567.0 2568.0 2569.0 2570.0 (99, refer to page 62) 50 50 20 10 Isolation Partition (page 58) Separator (page 59) a a a 2422.0 2423.0 2424.0 2425.0 (99, refer to page 62) External Jumpers (page 61) a 2 pole 3 pole 4 pole 10 pole max. no. of poles DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) a 2m (6'-6") long (page 54) a Suitable Marking Tags (Shaded) (refer to page 61) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 Refer to this page for Selection 66 Max. Number of Tags Per Side 1 a Refer to the page no. indicated for additional selection and ordering information. 10 (refer to page 61) AQ21 2064.0 20 AQ31 2065.0 20 AQ41 2066.0 20 AQ101 8830.0 5 (75, refer to page 61) SB6 BR5 BR6 TM1 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 AS3 TM2 70 1 b SB5 SB6 BR5 BR6 TM1 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 AS3 69 67 70 71 69 66 70 71 2 1 1 — 4 2 1 — SB5 SB6 BR5 BR6 TM1 Acceptable with 2 No. 14 AWG Wires c Test socket accepts 2.3mm (.09in.) dia. Test Plug. See page 59 Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 40 20 TM2 ➤ ➤ ➤ 48mm (1.89 in.) ➤ 48mm (1.89 in.) CATALOGS FIND IT ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ 50mm (1.97 in.) ➤ 58mm (2.28 in.) ➤ ➤ TS35x7.5 58mm (2.28 in.) TS32x15 63mm (2.48 in.) TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) mm .) 80 5 in 1 (3. ➤ ➤ ➤ ➤ ➤ RK6-10 mm .) 60 6 in 3 (2. TS35x7.5 71mm (2.80 in.) TS32x15 76mm (2.99 in.) ➤ ➤ ➤ RK2.5-4 RK16 RK35 ➤ ➤ ➤ KBL6-10 KBL2.5-4 50 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) 38 Terminations Per Foot Terminal Width 8mm (.315) Stripping Length 12 mm (.472) Screw Hole Diameter 6mm (.236) 25 Terminations Per Foot Terminal Width 12mm (.472) Stripping Length 15mm (.591) Screw Hole Diameter 6mm (.236) 19 Terminations Per Foot Terminal Width 16mm (.630) Stripping Length 20mm (.787) Screw Hole Diameter 8mm (.315) Wire Range 0.2-4mm 2 22-10 AWG 22-10 AWG Wire Range 0.2-10mm2 22-6 AWG 22-8 AWG Current 57A 65A 55A Voltage 800V 600V 600V Wire Range 2.5-16mm 2 10-4 AWG 10-4 AWG Voltage 800V 600V 600V Wire Range 2.5-35mm 2 10-2 AWG 12-2 AWG Type Cat. No. Std. Pk. Type Std. Pk. Type Type Current 32A 40A d 40A Voltage 800V 600V 600V Cat. No. Std. Pk. RK2.5-4 1001.2 100 RK2.5-4/STB 1008.2 100 e 100 Voltage 800V 600V 600V Cat. No. RK16 1050.2 50 RK35 i Std. Pk. 1052.2 20 1002.2 10 KBL6-10 1006.2 10 AP2.5-10 2001.2 50 AP2.5-10 2001.2 50 AP16 2104.2 20 AP35 2116.2 20 TW2.5-10 2002.2 50 TW2.5-10 2002.2 50 TW16 2105.2 20 TW35 2117.2 20 TRS1 2003.2 100 TRS1 2003.2 100 TRS1 2003.2 100 1424.2 1424.2 50 50 h ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 ES35/32 ES35/32h 1424.2 1424.2 50 50 ES35/32j ES35/32j Q24f Q34f Q44f Q104f 2019.0 2020.0 2021.0 2022.0 (81, refer to page 62) 50 50 20 10 Q25f Q35f Q45f Q105f 2060.0 2061.0 2062.0 2063.0 50 50 20 10 Q26 Q36 Q46 Q106 2112.0 2113.0 2114.0 2115.0 20 20 10 10 (refer to page 62 for Jumper Components) AQ21 AQ31 AQ41 AQ101 2064.0 2065.0 2066.0 8830.0 (75, refer to page 61) 20 20 20 5 AQ22 AQ32 AQ42 AQ102 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 e 1005.2 Cat. No. g Current 125A 115A 115A KBL2.5-4 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m d RK6-10 Current 76A 85A 85A SB5 SB6 BR5 BR6 TM1 69 67 70 71 4 2 1 — AS3 TM2 Acceptable with 2 No. 12 AWG Wires Test socket accepts 2.3mm (.09in.) dia. Test Plug. See Page 59 f 2067.0 20 2068.0 20 2069.0 20 8905.0 5 (58, refer to page 61) 40 20 SB5 SB6 BR5 BR6 TM1 69 67 70 71 4 2 1 — TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 Insulated Internal JumpersType QI may also be used, refer to page 76 AS3 g SB5 SB6 BR5 BR6 TM1 69 67 70 4 2 1 TM2 Version N1 h High profile End Stops Type HES may also be used, refer to page 73 AS3 SB5 SB6 B/5 B/6 80 79 81 4 2 1 TM1 40 20 TM2 i Version N1 j High profile End Stops Type HES may also be used, refer to page 73 Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 11 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT FEED-THROUGH HIGH CURRENT 35 or 32mm DIN Rail ➤ 85mm (3.35 in.) ➤ ➤ 93mm (3.66 in.) TS35x7.5 110mm (4.33 in.) TS35x15 118mm (4.65 in.) TS32x15 117mm (4.61 in.) ➤ ➤ TS32x15 ➤ TS35x15 TS35x7.5 78mm(3.07 in.) 86mm(3.39 in.) 85mm(3.35 in.) TS35x7.5 88mm (3.46 in.) TS35x15 96mm (3.78 in.) TS32x15 95mm (3.74 in.) ➤ ➤ ➤ ➤ Special locking provision secures terminal block to DIN rail. Each modular block has four (4) pins that interlock adjacent terminals for maximum stability and torsional resistance when tightening the screw clamps. Allen Head metric screws provide for convenient application of tightening torque with Allen Keys. • • • • • ➤ 80mm (3.15 in.) ➤ An advanced modular design for terminating large conductors (up to 500 MCM) carrying up to 370 Amp. Totally enclosed housing provides protection against accidental shock. RK50 RK150 RK95 Modular Design Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings IEC (File No. E95701 ) (File No. LR42110) Ordering Information 15 Terminations Per Foot Terminal Width 20mm (.787) Stripping Length 27 mm (1.063) Screw Hole Diameter 8mm (.315) 12 Terminations Per Foot Terminal Width 25mm (.984) Stripping Length 30mm (1.181) Screw Hole Diameter 8mm (.315) 9 Terminations Per Foot Terminal Width 31mm (1.220) Stripping Length 38mm (1.496) Screw Hole Diameter 10mm (.394) Wire Range 25-50mm 2 6-1/0 AWG 6-1/0 AWG Voltage 1000V 600V 600V Wire Range 35-95mm 2 2-4/0 AWG 2-4/0 AWG Wire Range Current 335A 50-150mm 2 2 AWG-300MCM 275A 2 AWG-300MCM 275A Current 168A 150A 150A Current 250A 230A 230A Voltage 1000V 600V 600V Type Cat. No. Std. Pk Type Cat. No. RK50 1120.2 10 RK95 1122.2 10 RK150 1124.2 5 End Stop for 35mm Rail (page 56) for 32mm Rail (page 56)a HES35 HES32 2761.0 2760.0 50 50 HES35 HES32 2761.0 2760.0 50 50 HES35 HES32 2761.0 2760.0 50 50 External Jumpers (page 61) a 2 pole 3 pole AQI2/50 AQI3/50 2763.2 2764.2 5 5 AQI2/95 AQI3/95 2765.2 2766.2 5 5 AQI2/150 AQI3/150 2767.2 2768.2 5 5 Warning Tag, Yellow with Black Symbol Snap-on, no screws required AD50 2810.2 20 AD95 2804.0 20 AD150 2806.0 20 Allen Key, Insulated Handle ISKS5 2818.0 1 ISKS6 2772.0 1 ISKS8 2773.0 1 Terminal Block a A Key Type ISKS5 ISKS6 ISKS8 Std. Pk. Type Cat. No. Voltage 1000V 600V 600V Dimension A 5mm (.197 in.) 6mm (.236 in.) 8mm (.315 in.) DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) a 2m (6'-6") long (page 54) a Suitable Marking Tags (Shaded) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 67 70 69 67 70 69 67 70 Max. Number of Tags Per Side 4 2 1 4 2 1 6 3 1 a Refer to the page no. indicated for additional selection and ordering information. 12 Std. Pk. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 40 20 TM2 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT ➤ ➤ ➤ TS35x7.5 123mm (4.84 in.) TS35x15 131mm (5.16 in.) TS32x15 130mm (5.12 in.) ➤ 93mm (3.66 in.) 4-Pole RK50 Assembly, with End Stop Type HES, External Jumper Type AQI and Warning Tag Type AD. RK240 8 Terminations Per Foot Terminal Width 36mm (1.417) Stripping Length 38mm (1.496) Screw Hole Diameter 10mm (.394) Wire Range Current 453A 70-240mm2 2/0 AWG-500 MCM 370A 2/0 AWG-500 MCM 370A Type Cat. No. Voltage 1000V 600V 600V Std. Pk. RK240 1126.2 5 HES35 HES32 2761.0 2760.0 50 50 AQI2/240 AQI3/240 2769.2 2770.2 5 5 AD240 2808.0 20 ISKS8 2773.0 1 3-Pole RK95 Assembly with High Profile Metal End Stop Type HES , Warning Tag Type AD and 2-Pole External Jumper Type AQI. TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 69 67 70 6 3 1 40 20 TM2 Allen Key is used to apply tightening torque when terminating wire. Straight blade screwdriver is shown releasing locking provision to remove block from DIN rail. Note: Before removal, a 3mm (.118 in.) separation between terminal blocks must be created to disengage the interlocking pins. Refer to the ordering section for Allen Key sizes. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 13 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT FEED-THROUGH COLOR 35 or 32mm DIN Rail For wire-to-wire connections in control, automation, instrumentation and power distribution applications. ➤ 44mm (1.73 in.) ➤ TS35x7.5 39mm (1.54 in.) TS32x15 43mm (1.70 in.) TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) TS35x7.5 44mm (1.73 in.) TS32x15 48mm (1.89 in.) ➤ ➤ ➤ ➤ TS32 x 15 ➤ 48mm (1.89 in.) ➤ ➤ • High Density, Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 TS35 x 15 ➤ 45mm (1.77 in.) ➤ 27mm (1.07 in.) ➤ AC or DC Control Circuits AC or DC Power Circuits Data Collection Circuits Ground, Neutral Distribution TS35 x 7.5 ➤ ➤ 27mm (1.07 in.) ➤ ➤ When color tags do not provide adequate definition, use our color terminal blocks. Colors can define circuits, simplify wiring and make troubleshooting quicker and more efficient. Color blocks are typically used to identify: SRK2.5 RK1.5-4 RK2.5 Color Color Color 60 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) 50 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 3.5mm (.138) 60 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Wire Range 0.2-2.5mm2 22-14 AWG 22-14 AWG Wire Range 0.2-4mm 2 22-10 AWG 22-10 AWG Voltage 500V 300V 300V Wire Range 0.2-2.5mm2 22-12 AWG 22-12 AWG TS15 x 5.5 Ratings IEC (File No. E95701) (File No. LR42110) Current 34A 20A 20A Voltage 500V 300V 300V Current 32A 30Ac 40A Current 24A 20A 20A Voltage 800V 600V 600V Ordering Information Type Type Cat. No. Std. Pk. Type Cat. No. Red Terminal Block SRK2.5/RD 1030/RD 100 RK1.5-4/RD 1015/RD 100 RK2.5/RD 1296/RD 100 Blue Terminal Block SRK2.5/BM 1030/BM 100 RK1.5-4/BM 1015/BM 100 RK2.5/BM 1296/BM 100 Black Terminal Block SRK2.5/BK 1030/BK 100 RK1.5-4/BK 1015/BK 100 RK2.5/BK 1296/BK 100 Orange Terminal Block SRK2.5/OR 1030/OR 100 RK1.5-4/OR 1015/OR 100 RK2.5/OR 1296/OR 100 Green Terminal Block SRK2.5/GR 1030/GR 100 RK1.5-4/GR 1015/GR 100 RK2.5/GR 1296/GR 100 Yellow Terminal Block SRK2.5/YE 1030/YE 100 RK1.5-4/YE 1015/YE 100 RK2.5/YE 1296/YE 100 White Terminal Block SRK2.5/WT 1030/WT 100 RK1.5-4/WT 1015/WT 100 RK2.5/WT 1296/WT 100 End Platea (page 58)b AP2.5 2070.2 50 AP1.5-4 2738.2 50 AP2.5-10 2001.2 Isolation Partition (page 58) b TW1.5 2071.2 50 TW1.5-4 2071.2 50 TW2.5-10 2002.2 50 Separator (page 59) b TW2.5 2426.2 50 TRS3 2566.2 100 TRS3 2566.2 100 End Stop for 35mm Rail (page 56)b for 32mm Rail (page 56)b ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 Internal Jumpers (page 62)b 2 pole 3 pole 4 pole 10 pole max. no. of poles Q21 Q31 Q41 Q101 2422.0 2423.0 2424.0 2425.0 (99, refer to page 62) 50 50 20 10 Q23 Q33 Q43 Q103 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) 50 50 20 10 Q22 Q32 Q42 Q102 Cat. No. Std. Pk. External Jumpers (page 61)b DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) b 2m (6'-6") long (page 54) b Suitable Marking Tags (Shaded) AS3 SB5 SB6 BR5 BR6 TM1 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 AS3 SB5 SB6 BR5 BR6 TM1 50 2567.0 50 2568.0 50 2569.0 20 2570.0 10 (99, refer to page 62) (refer to page 61) (refer to page 61) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Std. Pk. 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 AS3 40 20 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 66 70 69 67 70 71 69 66 70 71 Max. Number of Tags Per Side 1 1 2 1 1 — 4 2 1 1 a End Plate listed is beige, colors are available. Specify color (Ex: AP2.5-10/Red, 2001.2/Red after Type and Cat. No.) 14 b Refer to the page no. indicated for additional selection and ordering information. c Acceptable with 2 No. 14 AWG Wires Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 TM2 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ ➤ 48mm (1.89 in.) ➤ ➤ 48mm (1.89 in.) ➤ 59mm (2.32 in.) ➤ ➤ CATALOGS FIND IT TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) ➤ ➤ ➤ TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) ➤ ➤ RK2.5-4 RK6-10 RKD4 Color Color Color 50 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) 38 Terminations Per Foot Terminal Width 8mm (.315) Stripping Length 12mm (.472) Screw Hole Diameter 6mm (.236) 100 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-10 AWG 22-10 AWG Voltage 800V 600V 600V Wire Range 0.2-10mm2 22-6 AWG 22-8 AWG Voltage 800V 600V 600V Wire Range 0.2-4mm2 22-10 AWG 22-12 AWG Std. Pk. Type Std. Pk. Type Type Current 32A 40A d 40A Cat. No. Current 57A 65A 55A Cat. No. Current 32A 30Ag 25A Cat. No. Voltage 500V 300V 300V Std. Pk. RK2.5-4/RD 1001/RD 100 RK6-10/RD 1005/RD 100 RKD4/RD 1020/RD 100 RK2.5-4/BM1001/BM 100 RK6-10/BM 1005/BM 100 RKD4/BM 1020/BM 100 RK2.5-4/BK 1001/BK 100 RK6-10/BK 1005/BK 100 RKD4/BK 1020/BK 100 RK2.5-4/OR1001/OR 100 RK6-10/OR 1005/OR 100 RKD4/OR 1020/OR 100 RK2.5-4/GR1001/GR 100 RK6-10/GR 1005/GR 100 RKD4/GR 1020/GR 100 RK2.5-4/YE 1001/YE 100 RK6-10/YE 1005/YE 100 RKD4/YE 1020/YE 100 RK2.5-4/WT1001/WT 100 RK6-10/WT 1005/WT 100 RKD4/WT 1020/WT 100 AP4 2101.2 20 50 AP2.5-10 2001.2 50 AP2.5-10 2001.2 TW2.5-10 2002.2 50 TW2.5-10 2002.2 50 TRS1 2003.2 100 TRS1 2003.2 100 TRS3 2566.2 100 ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 50 50 20 10 Q25f Q35f Q45f Q105f 2060.0 2061.0 2062.0 2063.0 50 50 20 10 Q23 Q33 Q43 Q103 Q24e Q34e Q44e Q104e 2019.0 2020.0 2021.0 2022.0 (81, refer to page 62) (refer to page 61) (refer to page 61) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 d 40 20 SB5 SB6 BR5 BR6 TM1 AS3 SB5 40 20 SB6 BR5 BR6 TM1 50 50 20 10 (refer to page 61) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 69 67 70 71 69 67 70 71 69 67 70 71 4 2 1 — 4 2 1 — 4 2 2 — Acceptable with 2 No. 12 AWG Wires e Insulated Internal Jumpers Type QI may also be used, refer to page 76. f Insulated Internal Jumpers Type QI may also be used, refer to page 76. g Acceptable with 2 No. 14AWG Wires Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 15 ➤ 59mm (2.32 in.) • Extra High Density • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige RKD2.5 RKD2.5SV RKD4 Bridged Levels m m .) 50 97 in . (1 mm .) 60 6 in 3 (2. ➤ ➤ KBLD2.5 TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings IEC (File No. E95701) (File No. LR42110) KBLD4 120 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) 120 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) 100 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Voltage 500V 300V 300V Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Voltage 500V 300V 300V Wire Range 0.2-4mm 2 22-10 AWG 22-12 AWG Std. Pk. Type Std. Pk. Type Cat. No. RKD4 1020.2 100 RKD4/4STB c 1028.2 100 Current 24A 20A 20A Ordering Information Type Cat. No. Terminal Block, with Separate Feed-Through Levels RKD2.5 1206.2 Current 24A 20A 20A Cat. No. 100 Terminal Block with 4 Test Sockets Terminal Block with Bridged Levels RKD2.5SV 1209.2 Terminal Block 10-Pak, 10 Pos. KBLD2.5 1207.2 10 End Plate (page 58)a AP4 2101.2 20 Separator (page 59)a TRS3 2566.2 End Stop for 35mm Rail (page 56)a for 32mm Rail (page 56)a ES35 ES32 Internal Jumpers (page 62)a 2 pole 3 pole 4 pole 10 pole max. no. of poles Q22 Q32 Q42 Q102 Suitable Marking Tags (Shaded) KBLD4 1021.2 10 AP4 2101.2 20 TRS3 2566.2 100 TRS3 2566.2 100 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 2567.0 2568.0 2569.0 2570.0 (99, refer to page 62) 50 50 20 10 Q22 Q32 Q42 Q102 2567.0 2568.0 2569.0 2570.0 (99, refer to page 62) 50 50 20 10 Q23 Q33 Q43 Q103 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) 50 50 20 10 AQ21 AQ31 AQ41 AQ101 2064.0 2065.0 2066.0 8830.0 (75, refer to page 61) 20 20 20 5 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m SB5 SB6 BR5 BR6 TM1 (refer to page 61) 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 66 70 69 66 70 Max. Number of Tags Per Side 4 2 2 4 2 2 16 100 100 69 Refer to the page no. indicated for additional selection and ordering information. Std. Pk. 20 Refer to this page for Selection a Voltage 500V 300V 300V 2101.2 (refer to page 61) AS3 Current 32A 30Ab 25A AP4 External Jumpers (page 61)a 2 pole 3 pole 4 pole 10 pole max. no. of poles DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a ➤ ➤ Save installation time with our 10-Paks TS35x7.5 60mm (2.36 in.) TS32x15 ➤ TS35x7.5 60mm (2.36 in.) Available in 5mm (.197") and 6mm (.236") widths, each with two separate feed-through levels. Also offered with bridged upper and lower levels. (Type SV) ➤ 59mm (2.32 in.) 65mm (2.56 in.) ➤ TS35x7.5 60mm (2.36 in.) ➤ TS32x15 65mm (2.56 in.) 35 or 32mm DIN Rail ➤ ➤ ➤ ➤ 59mm (2.32 in.) ➤ FEED-THROUGH DOUBLE LEVEL CATALOGS FIND IT ➤ TS32x15 65mm (2.56 in.) ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 TM2 SB5 SB6 BR5 BR6 TM1 40 20 TM2 69 67 70 71 4 2 2 — b Acceptable with 2 No. 14 AWG Wires Test Socket accepts 2.3mm (.09 in.) dia. test plug. See page 59 c Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 ➤ TS32x15 65mm (2.56 in.) ➤ TS35x7.5 60mm (2.36 in.) TS35x7.5 60mm (2.36 in.) RKD4SV FEED-THROUGH TRIPLE LEVEL For applications with extreme space constraints. Only 5mm (.197") wide, with three separate feed-through levels. Internal jumpers can be used on each level, to reduce field wiring. 100 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) 76 Terminations Per Foot Terminal Width 7.5mm (.295) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-10 AWG 22-12 AWG Voltage 500V 300V 300V Wire Range 0.2-4mm2 22-10 AWG 22-12 AWG Std. Pk. Type Cat. No. Std. Pk. Ordering Information RKD4/750V 1025.2 80 RKD4SV/750V 1026.2 80 Type Cat. No. RKD4SV 1027.2 10 AP4 2101.2 20 TRS3 2566.2 100 ES35 ES32 2005.2 2004.2 50 50 Q23 Q33 Q43 Q103 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) 50 50 20 10 AQ21 AQ31 AQ41 AQ101 2064.0 2065.0 2066.0 8830.0 (75, refer to page 61) 20 20 20 5 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 d SB5 SB6 BR5 BR6 TM1 40 20 Current 32A 30Ae 25A ES35 ES32 TS35 x 7.5 Voltage 800V 600V 600V 2005.2 2004.2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 TS32x15 TS15x5.5 Ratings IEC (File No. E95701) (File No. LR42110) 180 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Current 24A 20A 20A Cat. No. Terminal Block RKT2.5 1261.2 50 End Plate (page 58)f AP/RKT2.5 2699.2 20 End Stop for 35mm Rail (page 56)f for 32mm Rail (page 56)f ES35 ES32 2005.2 2004.2 50 50 Internal Jumpers (page 62)f 2 pole 3 pole 4 pole 10 pole 20 pole Q21 Q31 Q41 Q101 Q201 2422.0 2423.0 2424.0 2425.0 2700.0 50 50 20 10 10 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)f 2m (6'-6") long (page 54) f TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) TM2 AS3 70 71 69 67 70 Refer to this page for Selection 69 66 70 4 2 2 — 4 2 2 Max. Number of Tags Per Side 6 3 3 Acceptable with 2 No. 14 AWG Wires Voltage 400V 300V 300V Type 67 e TM2 TS35 x 15 RKT2.5 69 Acceptable with 2 No. 14 AWG Wires SB5 SB6 BR5 BR6 TM1 50 50 ➤ 35 or 32mm DIN Rail • Integrated Seperator at Jumper • Extra High Density, Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige RKD4/750V Bridged Levels Current 32A 30Ad 25A 86mm (3.39 in.) TS35x7.5 58mm (2.28 in.) ➤ ➤ TS32x15 65mm (2.56 in.) ➤ 61mm (2.40 in.) ➛TS32x15 63mm (2.48 in.)➛ ➤ 59mm (2.32 in.) ➤ ➤ CATALOGS FIND IT ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT AS3 Std. Pk. SB5 SB6 BR5 BR6 TM1 40 20 TM2 f Refer to the page no. indicated for additional selection and ordering information. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 17 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT FEED-THROUGH MULTI - CONNECTION 35 or 32mm DIN Rail ➤ ➤ ➤ ➤ 67mm (2.63 in.) Type RK2.5-4ZR features a single screw-cage clamp for 22-10 AWG wires on Side 1 and two smaller clamps for 22-12 AWG wires on Side 2. Type RK2.5-4ZRL has two identical clamps for 22-12 AWG wires on both sides. Side 2 Side 1 • High Density, Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige TS35x7.5 47mm (1.85 in.) TS32x15 52mm (2.05 in.) ➤ TS35x7.5 47mm (1.85 in.) ➤ 57mm (2.24 in.) ➤ TS32x15 52mm (2.05 in.) ➤ Connect multiple wires to a single terminal block and eliminate reliability problems encountered when connecting two wires into a single clamp. Two versions are available. RK2.5-4ZR RK2.5-4ZRL 50 Terminations Per Foot - Side 1 100 Terminations Per Foot - Side 2 Terminal Width 6mm (.236) Stripping Length 9mm (.354)b Screw Hole Diameter 4mm (.158) 100 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) IEC Wire Range 0.2-4mm 2 Current 24A Voltage 500V Wire Range 0.2-4mm2 Current 24A Voltage 500V (File No. E95701) (File No. LR42110) Side 1 Side 2 22-10 AWG 22-10 AWG 25A 25A 600V 600V 22-10 AWG 22-10 AWG 25A 25A 600V 600V TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings Ordering Information Terminal Block Type Cat. No. RK2.5-4ZR 1210.2 100 End Plate (page 58)a Separator (page 59)a End Stop for 35 mm Rail (page 56)a for 32 mm Rail (page 56)a Internal Jumpers (page 62)a 2 pole 3 pole 4 pole 10 pole max. no. of poles AP2.5ZR 2574.2 50 TRS1 ES35 ES32 2003.2 2005.2 2004.2 100 50 50 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) a 2m (6'-6") long (page 54) a Q24c Q34c Q44c Q104c AS3 Refer to this page for Selection Max. Number of Tags Per Side Refer to the page no. indicated for additional selection and ordering information. 18 2019.0 2020.0 2021.0 2022.0 (81, refer to page 62) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) a Std. Pk. b c SB5 SB6 BR5 BR6 TM1 69 67 70 71 4 2 1 — Type Cat. No. RK2.5-4ZRL 1211.2 100 AP2.5ZRL TRS1 ES35 ES32 2575.2 2003.2 2005.2 2004.2 50 100 50 50 2019.0 2020.0 2021.0 2022.0 (81, refer to page 62) 50 50 20 10 50 50 20 10 Q24d Q34d Q44d Q104d 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 Double Clamp Side 2, 12mm (.472) Single Clamp Side 1 Insulated Internal Jumpers Type QI may also be used, refer to page 64. AS3 Std. Pk. 40 20 SB5 SB6 BR5 BR6 TM1 69 67 70 71 4 2 1 — TM2 Insulated Internal Jumpers Type QI may also be used, refer to page 64. d Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT MULTI-TERMINATION DOUBLE LEVEL 35mm DIN Rail Use low profile, double level Multi-Termination blocks for applications with special height constraints where double level blocks are too high. They are offered in three versions: FeedThrough, Feed-Through with Ground and Feed-Through with Ground and Disconnect. ➤ ➤ ➤ The addition of a ground provision on one terminal side of Type DLI2.5/PE/LL permits grounding to the DIN Rail. This saves valuable panel space and reduces the need for adding a separate ground terminal block. Middle and upper levels are available for Feed-Through circuits. Side 1 TS35 x 7.5 Feed-Through with Ground and Disconnect Multi-Termination terminal blocks are ideal for export applications where systems must comply with VDE 0100 (IEC 364) and VDE 0108 specifying that the relationship of circuits must be clearly defined and that an insulation check of each circuit must be possible without disconnecting the neutral conductor. Applications include distribution panels used in public buildings, such as airports, hospitals, schools, office buildings, etc. • • • • • High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Feed-Through: Beige Feed-Through with Ground : Beige and Green/Yellow Feed-Through with Ground and Disconnect: Beige and Blue and Green/Yellow TS35 x 15 TS32x15 Side 2 TS35x7.5 47mm (1.85 in.) ➤ TS32x15 52mm (2.05 in.) Side 1 Ratings DLI2.5/PE/LL Feed-Through Feed-Through with Ground Wire Range 0.2-2.5mm2 22-12 AWG 22-12 AWG IEC a a Ground Side DLI2.5/LL 100 Terminations Per Foot d Terminal Width 6mm (.236) Stripping Length 8mm (.315) Screw Hole Diameter 3mm (.118) 100 Terminations Per Foot Terminal Width 6mm (.236) Stripping Length 8mm (.315) Screw Hole Diameter 3mm (.118) TS15x5.5 ➤ ➤ Feed-Through with Ground The Double Level FeedThrough with Ground MultiTermination terminal block is also available with a slide disconnect on the upper level, Type DLI2.5/PE/LNT. It allows a circuit to be opened for testing. ➤ 91mm (3.58 in.) TS35x7.5 47mm (1.85 in.) ➤ TS32x15 52mm (2.05 in.) 91mm (3.58 in.) Current 24A 20A 20A Voltage 400V 300V 300V Ordering Information Type Cat. No. Feed-Through Terminal Block DLI2.5/LL 1421.2 50 Feed-Through Terminal Block with Neutral Marking DLI2.5/LN 1420.2 50 Wire Range 0.2-2.5mm2 22-12 AWG 22-12 AWG Std. Pk. Type Current 24A 20A 20A Voltage 400V 300V 300V Cat. No. Std. Pk. Feed-Through Terminal Block with Ground DLI2.5/PE/LL 1419.2 50 Feed-Through Terminal Block with Ground and Neutral Marking DLI2.5/PE/LN 1418.2 50 Feed-Through Terminal Block with Ground and Disconnect and Neutral Marking DLI2.5/PE/LNT 1417.2 50 b End Plate (page 58) b Separator (page 59) b End Stop for 35 mm Rail (page 56) b Internal Jumpers (page 62) 2 pole 3 pole 4 pole 10 pole 20 pole External Jumpers (page 61)b DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)b 2m (6'-6") long (page 54)b AP/DLI 2831.2 20 TRS3 2566.2 100 ES35/2K 2826.2 Q28 Q38 Q48 Q108 Q208 2832.0 2833.0 2834.0 2835.0 2836.0 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 Refer to this page for Selection Max. Number of Tags Per Side b Pending Refer to the page no. indicated for additional selection and ordering information. 2831.2 20 TRS3 2566.2 100 50 ES35/2K 2826.2 50 50 50 20 10 10 Q28 Q38 Q48 Q108 Q208 2832.0 2833.0 2834.0 2835.0 2836.0 50 50 20 10 10 (Refer to page 61) (Refer to page 61) Suitable Marking Tags (Shaded) a AP/DLI c SB5 SB6 BR5 BR6 TM1 69 67 70 4/6c 2/3c 2/3c The first number indicates Side 1. The second number indicates Side 2. 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 69 67 70 4/6e 2/3e 2/3e 40 20 TM2 d 150 terminations per foot on Ground Side e The first number indicates Side 1. The second number indicates Ground Side. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 19 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT DISCONNECT ➤ ➤ 48mm (1.89 in.) Knife and Lever Lever The Lever Disconnect is a sectional fuse block with a conductive insert installed to create a single pole switch. Type TK2/K is a low profile design for minimum clearance applications. Type SIK10/K has a high profile that provides convenient lever access when positioned near other high profile blocks on a rail assembly. If features a completely touch proof base terminal block when the lever is open. The conductive insert is made of tin-plated brass to maintain a reliable, corrosion free contact after repeated operations. TS35 x 7.5 TS35 x 15 TS32 x 15 42mm (1.65 in.) 47mm (1.85 in.) TS35x7.5 48mm (1.89 in.) TS32x15 53mm (2.09 in.) • High Density, Modular and Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige TS15 x 5.5 Ratings IEC (File No. E95701) (File No. LR42110) TS35x7.5 TS32x15 ➤ Isolate a circuits for testing and repair without disconnecting wires. The hinged knife switch can be opened manually or with a screwdriver, providing visual indication of an open circuit. Optional test sockets permit circuit testing without interruption when opening the knife disconnect. This prevents open circuit damage to a current transformer. To ensure a highly efficient, corrosion resistant connection the knife and contacts are made of tinplated bronze alloy. m 58m ➤ Knife Order TRK1.5 Knife Disconnect with or without test sockets. Select either the low profile TK2/K Lever Disconnect or the advanced SIK10/K Lever Disconnect design with a high profile for convenient lever access. (2.2 ➤ Choose from Knife, Lever and Plug Disconnect terminal block designs. Select the version best suited for your application's requirements. ➤ ➤ .) 8 in ➤ 35 or 32mm DIN Rail CATALOGS FIND IT TRK1.5 TK2/K Knife Disconnect Lever Disconnect Terminal Width 6mm (.236) Stripping Length 8mm (.315) Screw Hole Diameter 4mm (.158) Terminal Width 8mm (.315) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.2-4mm2 22-12 AWG 22-12 AWG Current 10A 15A 15A Voltage 400V 600V 600V Ordering Information Type Cat. No. Knife Disconnect Terminal Block TRK1.5 1390.2 100 Knife Disconnect Terminal Block with 2 Test Sockets TRK1.5/STBb 1391.2 100 Std. Pk. Type Current 20A 15A 15A Cat. No. Lever Disconnect Terminal Block with Conductive Insert TK2/K Lever Ganging Refer to STK1, page 23 End Plate (page 58)a Voltage 400V 600V 600V Std. Pk 2193.2 100 AP/STK1 2046.2 50 End Stop for 35mm Rail (page 56)a for 32mm Rail (page 56)a ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 50 50 External Jumpers (page 61) a 2 pole 3 pole 4 pole AQ21 AQ31 AQ41 2064.0 2065.0 2066.0 20 20 20 AQ22 AQ32 AQ42 2067.0 2068.0 2069.0 20 20 20 Plug Isolate circuits or provide polarity protection. The removable plug becomes a feedthrough when equipped with a wire jumper, or it can be outfitted with diodes to provide Terminal Block Circuits reverse polarity protection. Simply remove the plug to isolate the circuit. The Plug Disconnect consists of a Base Berminal Block and a removable Plug which is keyed. Order the Base Terminal Block and the Plug individually with or without components. Or order the Base Terminal Block and Plug together with or without test sockets and with or without components. 20 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) a 2m (6'-6") long (page 54) a TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) AS3 Refer to this page for Selection Max. Number of Tags Per Side a Refer to the page no. indicated for additional selection and ordering information. b SB5 SB6 BR5 BR6 TM1 69 67 70 4 2 1 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 TM2 Test Socket accepts 2.3mm (.09 in.) dia. Test Plug. See page 59 AS3 SB5 SB6 BR5 BR6 TM1 67 70 2/1c 2/0c c 40 20 TM2 The first number indicates the Lever Top. The second number indicates the Side. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 CATALOGS FIND IT ➤ ➤ 39mm (1.54 in.) ➤ ➤ ➤ ➤ TS35x7.5 66mm (2.60 in.) TS32x15 71mm (2.80 in.) Order as Plug Disconnect or Base Terminal Block and Plug separately. Plugs are available without components or are outfitted with wire jumper or diodes. • High Density, Modular • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige TS32x15 53mm (2.09 in.) ➤TS35x7.5 48mm (1.89 in.) ➤ DS Plug ➤ TS35x7.5 69mm (2.72 in.) ➤ TS32x15 74mm (2.91 in.) ➤ ➤ Plug 48mm (1.89 in.) ➤ ➤ 60mm (2.36 in.) ➤ 48mm (1.89 in.) ➤ SIK10/K TRK1.5/DS TRK1.5/NDS Lever Disconnect Plug Disconnect Plug Disconnect Base Terminal Block Terminal Width 8mm (.315) Stripping Length 12mm (.472) Screw Hole Diameter 6mm (.236) TS35 x 7.5 Wire Range 0.2-10mm2 22-12 AWG 22-12 AWG Type Current 20A 16A 16A Cat. No. TS35 x 15 TS32x15 TS15x5.5 Terminal Width 6mm (.236) Stripping Length 8mm (.315) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 8mm (.315) Screw Hole Diameter 4mm (.158) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.2-2.5mm2 22-12 AWG 22-12 AWG Voltage 500V 600V 600V Ratings Std. Pk. Ordering Information Type Cat. No. Std. Pk. Plug Disconnect Terminal Block with Plug (plug without components) TRK1.5/DS 1394.2 50 (plug without components) TRK1.5/STB/DSd 1395.2 50 Plug Disconnect Terminal Block with Plug (plug with components) Wire Jumper Diodea 1A/1000V Diodea 1A/1000V TRK1.5/DS1 TRK1.5/DS2 TRK1.5/DS3 50 50 50 IEC (File No. E95701) (File No. LR42110) 19mm (.75 in.) TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT Current 10A 15A 15A Voltage 400V 600V 600V Current 10A 15A 15A Voltage 400V 600V 600V Type Cat. No. Std. Pk. TRK1.5/NDS 1398.2 100 TRK1.5/STB/NDSd1399.2 100 Plug Disconnect Terminal Block with Plug and 2 Test Sockets SIK10/K 8802.2 50 Refer to SIK10, page 22 AP/SIK10 2762.2 20 ES35/2K ES32/2K 2826.2 2825.2 50 50 2168.2 2198.2 2247.2 Base Terminal Block without Plug Base Terminal Block with 2 Test Sockets, without Plug Plug only for TRK1.5/NDS (no components) DS 1403.2 5 Plug only for TRK1.5/NDS (with components) Wire Jumper Diodea 1A/1000V Diodea 1A/1000V DS1 DS2 DS3 1400.2 1401.2 1402.2 5 5 5 End Stop (See Accessories for TRK1.5) (Refer to page 20) External Jumpers (see Accessories for TRK1.5) (Refer to page 20) Terminal Block Circuits TRK1.5/NDS DS TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)b 2m (6'-6") long (page 54)b TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) 69 67 70 Refer to this page for Selection 4 2 1 Max. Number of Tags Per Side a b Diode IN4007 or equivalent Refer to the page no. indicated for additional selection and ordering information. AS3 d SB5 SB6 BR5 BR6 TM1 69 67 70 4/2e 2/1e 1/1e 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 Test socket accepts 2.3mm (.09in.) dia. Test Plug. See page 59 e The first number indicates the Base Terminal. The second number indicates the Plug. AS3 SB5 SB6 BR5 BR6 TM1 69 67 70 4/2 c 2/1c 1/1c 40 20 TM2 c The first number indicates the Base Terminal. The second number indicates the Plug. d Test socket accepts 2.3mm (.09 in.) dia. Test Plug. See page 59. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 21 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ VB S2 VB S3 ➤ TS32x15 74mm (2.91 in.) ➤ TS35x7.5 69mm (2.72 in.) TS35x7.5 69mm (2.72 in.) SIK10/Z ➤ TS35x7.5 85mm (3.35 in.) TS32x15 90mm (3.54 in.) ➤ ➤ TS35x7.5 85mm (3.35 in.) ➤ TS32x15 90mm (3.54 in.) SIK10 • High Density, Sectional and Modular • Screw-Cage Clamp • Fuse Ratings 32mA to 16A • Polyamide 6.6 • Standard Color: Beige SIK10/Z/LED SIK10/LED TS35 x 7.5 TS35 x 15 TS32 x 15 ➤ 60mm (2.36 in.) ➤ TS32x15 74mm (2.91 in.) ➤ Use the advanced lever designs Types SIK10 for miniature 5mm fuses and the SIK10/Z for standard 1/4" fuses. Choose the compact STK1 lever design for 5mm fuses and minimum clearance applications. Terminal Width 10mm (.394) Stripping Length 12mm (.472) Screw Hole Diameter 6mm (.236) Terminal Width 8mm (.315) Stripping Length 12mm (.472) Screw Hole Diameter 6mm (.236) TS15 x 5.5 Ratings IEC (File No. E95701) (File No. LR42110) Ordering Information Fuse Block Fuse Block with Red LED For DC and AC Applications 12VDC / 24V AC 20-30VDC / 40-60V AC 40-60VDC / 80-120V AC 110VDC / 220V AC LED Plug Unit with Red LEDa 12VDC / 24V AC 20-30VDC / 40-60V AC 40-60VDC / 80-120V AC 110VDC / 220V AC Wire Range 0.2-10mm 2 22-12AWG 22-12 AWG Currentc 10A 10A 10A Voltagec 500V 600V 600V Type SIK10 Cat. No. Std. Pk. 1101.2 50 Currentd 10A 16A 16A Wire Range 0.2-10mm2 22-12AWG 22-12 AWG Voltaged 500V 600V 600V Type SIK10/Z Cat. No.Std. Pk. 1102.2 25 SIK10/LEDES SIK10/LEDGT SIK10/LEDJU SIK10/LEDMX 1103.2 1104.2 1105.2 1106.2 25 25 25 25 SIK10/Z/LEDES SIK10/Z/LEDGT SIK10/Z/LEDJU SIK10/Z/LEDMX 1108.2 1109.2 1110.2 1111.2 25 25 25 25 Lever Ganging VBS2/10 VBS3/10 2873.3 2874.3 20 20 VBS2/10Z VBS3/10Z 2875.3 2876.3 20 20 End Plate (page 58)b AP/SIK10 2762.2 20 End Stop for 35mm Rail (page 56)b for 32mm Rail (page 56)b ES35/2K ES32/2K 2826.2 2825.2 50 50 ES35/2K ES32/2K 2826.2 2825.2 50 50 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m External Jumpers, please consult Altech Terminal Block Circuits DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) b 2m (6'-6") long (page 54) b TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 TM2 AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 67 70 69 67 70 Max. Number of Tags Per Side 4 2 1 4 2 1 Other voltages available on request, please contact Altech. a Refer to the page no. indicated for additional selection and ordering information. b 22 ➤ Lever 5mm and 1/4" Fuses Suitable Marking Tags (Shaded) Lever Ganging Sleeve for SIK10 and SIK10/Z Fuse Blocks. 60mm (2.36 in.) ➤ Protect circuits from damaging over-loads with miniature 5mm or standard 1/4" Fuse Terminal Blocks. Select from Lever and Vertical Insert designs. All Lever designs are available with LED blown fuse indication. SIK10, SIK10/Z Lever SIK10 accepts 5x20, 5x25 and 5x30mm fuses. SIK10/Z accepts 1/4" x 1" and 1/4" x 11/4" fuses. High profile provides convenient lever access when positioned near high profile blocks on an assembly. Base terminal block is completely touch proof even with lever open, providing maximum safety against accidental shock. Select standard Fuse Block, Fuse Block with LED or LED Plug to convert standard Fuse Block after installation. Choose required AC or DC voltage range.Install optional Lever Ganging Sleeve on lever ends to permit simultaneous opening of two and three fuses. STK1 Lever Quickly install and replace 5x20 or 5x25mm fuses by inserting into lever arm. When arm is lowered, fuse automatically plugs into fuse holder located in base of block. Simply open lever to isolate circuit or replace fuse. Low profile is ideal for minimum clearance applications.Order with or without LED blown fuse indication. Select required voltage when ordering LED fuse blocks. Install optional Lever Ganging Extrusion on lever ends to permit simultaneous opening of 2 or 3 fuses. SK3X Vertical Insert SK3X accepts standard 1/4" x 1-1/4" fuses, which are inserted vertically and secured by screw cap. 1/4x1, 1/4x1-1/4" Fuses 5x20, 5x25, 5x30mm Fuses FUSE BLOCKS 35 or 32mm DIN Rail CATALOGS FIND IT In LED Versions, maximum operating voltage is determined by LED rating. Current rating is determined by the fuse rating. A 2mA residual current is present when fuse is blown. c 40 20 TM2 In LED Versions, maximum operating voltage is determined by LED rating. Current rating is determined by the fuse rating. A 2mA residual current is present when fuse is blown. d Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT ➤ 1/4" x 1-1/4" Fuses STK1 LED Pluge (2. ) in. 58 35mm DIN Rail ➤ ➤ ➤ SK3X/32 STK1/LED Wire Range 0.2-4mm2 22-12AWG 22-12 AWG Type Cat. No. Std. Pk. Currentf 6.3A 6.3A 6.3A Type STK1 Cat. No. Std. Pk. 2190.2 100 STK1/LEDS STK1/LEDG STK1/LEDU STK1/LEDX SST/SIK/LEDES 1113.2 SST/SIK/LEDGT 1114.2 SST/SIK/LEDJU 1115.2 SST/SIK/LEDMX 1116.2 TS35 x 7.5 Voltagef 400V 600V 300V 2454.2 2449.2 2457.2 2458.2 10 10 10 10 10 10 10 10 LGE (.5m) 8806.0 10 AP/STK1 2046.2 50 ES35 ES32 2005.2 2004.2 50 50 AS3 In LED Versions, maximum operating voltage is determined by LED rating. Current rating is determined by the fuse rating. A 2mA residual current is present when fuse is blown. e SB5 SB6 BR5 BR6 TM1 TS15x5.5 Wire Range 0.5-10mm 2 22-10 AWG 22-10 AWG SK3X/35 8906.6 20 Fuse Block for 32mm Rail SK3X/32 8809.6 20 AP/SK3X 8907.6 20 End Stop for 35mm Rail (page 56) for 32mm Rail (page 56)h ES35 ES32 2005.2 2004.2 20 50 External Jumpers (page 62)h 2 pole 3 pole 4 pole 10 pole AQ2X1 AQ3X1 AQ4X1 AQ10X1 8911.0 8912.0 8913.0 8914.0 20 20 20 20 End Plate (page 58) h h Std. Pk. Terminal Block Circuits DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)h 2m (6'-6") long (page 54)h DIN Rail, 32mm Unperforated 1m (3'-3") long (page 54)h 2m (6'-6") long (page 54)h Suitable Marking Tags (Shaded) 67 70 2/1g 2/0g Max. Number of Tags Per Side In LED Versions, maximum operating voltage is determined by LED rating. Current rating is determined by the fuse rating. A 2mA residual current is present when fuse is blown. Cat. No. Voltage 500V 300V 600V Type Refer to this page for Selection f Current 10A 10A 10A Ordering Information Fuse Block for 35mm Rail 40 20 TM2 TS32x15 IEC STK1/LED TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TS35 x 15 Terminal Width 13mm (.512) Stripping Length 12mm (.470) Screw Hole Diameter 6mm (.236) Ratings STK1 STK1 ➤ 32mm DIN Rail Terminal Width 8mm (.315) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Plug Width 7mm (.276) 54mm (2.13 in.) • High Density, Sectional • Screw-Cage Clamp • 35 and 32mm DIN Rail • Fuse Ratings up to 10A • Melamine • Standard Color: Tan TS35x7.5 42mm (1.65 in.) TS32 x15 47mm (1.85 in.) 28 mm ➤ ➤ SST/SIK/LED SK3X/35 ➤ ➤ The SK3X traditional design permits 1/4" fuse to be inserted and replaced vertically from the top of the block simply by removing the screw cap. TS32x15 61mm (2.40 in.) 58m ➛ ➤ ➤ 14mm (.55 in.) ➤ TS35x7.5 42mm (1.65 in.) TS32 x15 47mm (1.85 in.) 2.2 m( ➤ Vertical Insert ➤ .) 8 in ➤ ➤ ➛ 27mm (1.06 in.) 54mm (2.13 in.) ➤ TS35x7.5 54mm (2.13 in.) ➤ 5x20, 5x25mm Fuses TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m 24 12 AS3 SB5 SB6 BR5 BR6 TM1 67 70 1 1 TM2 h Refer to the page no. indicated for additional selection and ordering information. The first number indicates the Lever Top. The second number indicates the Side. g ® Altech Corp. • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 23 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT INDICATOR DOUBLE LEVEL ➤ TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) RKD4D RKD4D AC Voltage - Neon Lamp DC Voltage - LED Positive Common RKD4D AC Voltage - LED ➤ ➤ TS35x7.5 60mm (2.36 in.) TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) ➤ TS32x15 65mm (2.56 in.) ➤ High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige ➤ 59mm (2.32 in.) ➤ 59mm (2.32 in.) ➤ ➤ Monitor status of circuits and speed troubleshooting. Common potential can be easily jumpered in the upper level by using Type Q Jumper. Red LED or white Neon Lamp. • • • • • ➤ ➤ 59mm (2.32 in.) ➤ 35 or 32mm DIN Rail Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-12 AWG Current 10A Wire Range 0.2-4mm 2 22-12 AWG Wire Range 0.2-4mm2 22-12 AWG Type Cat. No. Std. Pk. RKD4D/RS RKD4D/RT 1042.2 1043.2 10 10 RKD4D/RU RKD4D/RX 2316.2 2469.2 10 10 RKD4D/NU RKD4D/NX 1045.2 1044.2 10 10 End Plate (page 58)a AP4 2101.2 20 AP4 2101.2 20 Isolation Partition (page 58)a TRS3 2566.2 100 TRS3 2566.2 End Stop for 35mm Rail (page 56)a for 32mm Rail (page 56)a ES35 ES32 2005.2 2004.2 50 50 ES35 ES32 2005.2 2004.2 Internal Jumpers (page 62)a 2 pole 3 pole 4 pole 10 pole max. no. of poles Q23 Q33 Q43 Q103 50 50 50 10 Q23 Q33 Q43 Q103 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) AQ21 AQ31 AQ41 AQ101 2064.0 20 2065.0 20 2066.0 20 8830.0 5 (75, refer to page 61) TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings IEC Ordering Information Indicator Terminal Block 24V 48V 60V 110V 220V (Other voltages, green LEDs available upon request.) External Jumpers (page 61)a 2 pole 3 pole 4 pole 10 pole max. no. of poles 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) AQ21 2064.0 20 AQ31 2065.0 20 AQ41 2066.0 20 AQ101 8830.0 5 (75, refer to page 61) Current 10A Type Cat. No. Std. Pk. Current 10A Type Cat. No. RKD4D/RG RKD4D/RK 1040.2 2314.2 10 10 AP4 2101.2 20 100 TRS3 2566.2 100 50 50 ES35 ES32 2005.2 2004.2 50 50 50 50 50 10 Q23 Q33 Q43 Q103 2087.0 2088.0 2089.0 2090.0 (82, refer to page 62) 50 50 50 10 AQ21 AQ31 AQ41 AQ101 2064.0 20 2065.0 20 2066.0 20 8830.0 5 (75, refer to page 61) Terminal Block Circuits Common (Jumper) + Switching Negative (-) DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a Suitable Marking Tags (Shaded) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 Signal TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 67 70 69 67 70 69 67 70 Max. Number of Tags Per Side 4 2 2 4 2 2 4 2 2 a Refer to the page no. indicated for additional selection and ordering information. 24 Std. Pk. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 40 20 TM2 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT INDICATOR TRIPLE LEVEL Monitor the status of individual circuits. Positive or negative common potential on upper level. Middle and lower levels are easily jumpered using Type Q Jumpers. Cat. No. RKD4D/RG 1041.2 RKD4D/RK 2315.2 10 10 AP4 2101.2 20 TRS3 2566.2 100 ES35 ES32 2005.2 2004.2 50 50 TS35x7.5 58mm (2.28 in.) RKT2.5U/L DC Voltage - LED Positive Common IEC Wire Range 0.2-2.5mm 2 22-12 AWG Wire Range 0.2-2.5mm 2 22-12 AWG Ordering Information Type Cat. No. Terminal Block, Red LED Between Upper and Middle Level 24V 48V 60V (Other voltages, green LEDs available upon request) RKT2.5U/MG RKT2.5U/MJ RKT2.5U/MK 1283.2 1285.2 1287.2 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings Std. Pk. RKT2.5U/M DC Voltage - LED Negative Common Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) TS35 x 7.5 Current 10A Type High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-12 AWG ➤ TS32x15 63mm (2.48 in.) ➤ • • • • • ➤ 86mm (3.39 in.) TS35x7.5 58mm (2.28 in.) ➤ TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) ➤ DC Voltage - LED Negative Common ➤ 86mm (3.39 in.) ➤ TS32x15 63mm (2.48 in.) ➤ ➤ RKD4D ➤ 35 or 32mm DIN Rail ➤ ➤ 59mm (2.32 in.) Current 10A Std. Pk. Current 10A Type Cat. No. Std. Pk. 10 10 10 Terminal Block, Red LED Indicator Between Upper and Lower Level 24V 48V 60V (Other voltages, green LEDs available upon request) RKT2.5U/LG 1289.2 RKT2.5U/LJ 1291.2 RKT2.5U/LK 1293.2 10 10 10 Q23 2087.0 Q33 2088.0 Q43 2089.0 Q103 2090.0 (82, refer to page 62) 50 50 50 10 End Plate (page 58) a AP/RKT2.5 2699.2 20 AP/RKT2.5 2699.2 20 End Stop for 32mm Rail (page 56)a for 35mm Rail (page 56)a ES35/2K ES32 2826.2 2004.2 50 50 ES35/2K ES32 2826.2 2004.2 50 50 AQ21 2064.0 AQ31 2065.0 AQ41 2066.0 AQ101 8830.0 (75, refer to page 61) 20 20 20 5 Internal Jumpers (page 62)a 2 pole 3 pole 4 pole 10 pole Q21 Q31 Q41 Q101 2422.0 2423.0 2424.0 2425.0 50 50 20 10 Q21 Q31 Q41 Q101 2422.0 2423.0 2424.0 2425.0 50 50 20 10 Common (Jumper) Switching Positive (+) SB5 SB6 BR5 BR6 TM1 40 20 TM2 Signal - Switching Positive (+) - Jumper Negative (-) Signal TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 Terminal Block Circuits DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a Suitable Marking Tags (Shaded) TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Signal - Switching Negative (-) Jumper Positive (+) 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 69 67 70 Refer to this page for Selection 69 66 70 69 66 70 4 2 2 Max. Number of Tags Per Side 6 3 3 6 3 3 40 20 TM2 a Refer to the page no. indicated for additional selection and ordering information. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 25 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT SURGE SUPPRESSION TS35 x 15 TS32 x 15 ➤ 65mm (2.56 in.) TS32x15 ➤ TS32x15 ➤ TS35x7.5 60mm (2.36 in.) 65mm (2.56 in.) TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) ➤ ➤ ➤ 59mm (2.32 in.) RKD4D RKD4RC RKD4UG Diode Surge Suppressor RC / Surge Suppressor Gas Suppressor Positive or Negative Common For DC Solenoid Valves and Contactors Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) TS15 x 5.5 Ratings ➤ 59mm (2.32 in.) ➤ TS35x7.5 60mm (2.36 in.) ➤ High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige TS35 x 7.5 ➤ • • • • • ➤ 59mm (2.32 in.) Protect personnel, equipment and devices from damaging voltage surges, spikes and overvoltages from lightning, inductive switching or electrostatic discharge. Improve system reliability and reduce downtime. Typical applications include protection of industrial equipment such as computers, motor controllers, etc. ➤ 35 or 32mm DIN Rail IEC Wire Range 0.2-4mm2 22-12 AWG Current Ordering Information Type Terminal Block, Positive Common RKD4D/A 1 1046.2 10 Terminal Block, Negative Common Diode: 1N4007 or equivalent Blocking Voltage 1000V, Current 1A RKD4D/B 2 1047.2 10 b Voltage 400V Circuit Cat. No. Std. Pk Terminal Block, RC/Surge Suppressor Terminal Width 18mm (.709) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Terminal Width 12mm (.472) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-12 AWG Wire Range 0.2-4mm2 22-12 AWG Current Voltage 250V AC 330V DC c Type Cat. No. RKD4RC 1189.2 Std. Pk. Type Current 10A Cat. No. Std. Pk. 10 Terminal Block, Gas Suppressor Maximum Single Impulse Discharge (kA) 90VDC ± 20% 8/20µs, 5kA. 230VDC ± 15% AC Discharge 10 x 1 sec., 5A 600VDC ± 15% RKD4UG/90 1033.2 RKD4UG/230 1034.2 RKD4UG/600 1048.2 10 10 10 Terminal Block, Varistor Max. Operating Voltage, Max. Surge 30VAC, 38VDC, 8/20µs, 1kA 60VAC, 85VDC 8/20µs, 4.5kA once 75VAC, 100VDC 500VA for 10 for 10 130VAC, 170VDC 150VA Power Dissipation= 275VAC, 350VDC 0.6 Watt 2 4 For Accessories refer to page 24 Application Diagrams R2 R1 R1 R1 MCB .22µƒ 10052 Internal jumper for positive common Load Internal jumper for negative common Common Anode or Cathode Surge Suppressor Terminal Block Circuits 1 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54) a 2m (6'-6") long (page 54) a 2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) AS3 SB5 SB6 BR5 BR6 TM1 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 67 70 69 67 70 69 67 70 Max. Number of Tags Per Side 4 2 2 4 2 2 4 2 2 a Refer to the page no. indicated for additional selection and ordering information. 26 b 10A feed-through, 27A jumper c 10A feed-through, 27A jumper Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 40 20 TM2 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT DIODE CIRCUITS 35 or 32mm DIN Rail Current 10A Type Cat. No. High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige RKD4D RKD4D Reverse Polarity Protection Lamp Testing Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) IEC Wire Range 0.2-4mm 2 22-12 AWG Voltage 400V Wire Range 0.2-4mm 2 22-12 AWG Ordering Information Type Cat. No. Std. Pk. Type Cat. No. Terminal Block with Diodes Diode IN4007 or equivalent Blocking Voltage 1000V, Current 1A RKD4D/C 2319.2 RKD4D/D 2320.2 TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings Std. Pk. TS35x7.5 60mm (2.36 in.) • • • • • ➤ 59mm (3.23 in.) ➤ TS32x15 65mm (2.56 in.) ➤ ➤ TS35x7.5 60mm (2.36 in.) TS32x15 65mm (2.56 in.) ➤ Jumper externally or internally as required by using Type Q or AQ Jumpers. Terminal Width 12mm (.472) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-12 AWG ➤ 59mm (3.23 in.) ➤ TS35x7.5 60mm (2.36 in.) ➤ TS32x15 65mm (2.56 in.) ➤ Varistor ➤ RKD4UV Provide reverse polarity protection and facilitate lamp testing. Combine any number of terminal blocks to create custom circuits that meet your requirements. ➤ ➤ 59mm (2.32 in.) Current b 10 Current Voltage 400V c Std. Pk. 10 For Accessories, refer to page 24 Application Diagrams Reverse Polarity Protection Internal Jumper Test + RKD4UV/30 RKD4UV/60 RKD4UV/75 RKD4UV/130 RKD4UV/275 1023.2 1024.2 1029.2 1031.2 1051.2 10 10 10 10 10 Surge Suppression DC Coil Inductive Kick Signal + VCC L O A D S bus test power to next block Lamp Lamp Test Circuit Power Distribution, Common Anode (Ref. Diode Module (page 90) Protected Load DC or AC Phase to Phase AC Phase to Ground Terminal Block Circuits TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a Suitable Marking Tags (Shaded) 69 67 70 Refer to this page for Selection 4 2 2 Max. Number of Tags Per Side TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 b AS3 SB5 SB6 BR5 BR6 TM1 69 67 70 69 67 70 4 2 2 4 2 2 a Refer to the page no. indicated for additional selection and ordering information. TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 10A top level feed-through, 1A signal, 27A jumper c 40 20 TM2 1A per line, 27A jumper Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 27 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT CATALOGS FIND IT DIODE CIRCUITS 35 or 32mm DIN Rail ➤ ➤ ➤ TS35x7.5 60mm (2.36 in.) ➤ TS32x15 65mm (2.56 in.) TS35x7.5 60mm (2.36 in.) Jumper externally or internally as required by using Type Q or AQ Jumpers. • • • • • ➤ 59mm (3.23 in.) ➤ TS32x15 65mm (2.56 in.) ➤ 59mm (3.23 in.) ➤ Provide reverse polarity protection and facilitate lamp testing. Combine any number of terminal blocks to create custom circuits that meet your requirements. High Density, Sectional Screw-Cage Clamp Universal Foot Polyamide 6.6 Standard Color: Beige RKD4D RKD4D Lamp Testing Lamp Testing Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 9mm (.354) Screw Hole Diameter 4mm (.158) IEC Wire Range 0.2-4mm 2 22-12 AWG Voltage 400V Wire Range 0.2-4mm2 22-12 AWG Ordering Information Type Std. Pk Type Terminal Block with Diodes Diode IN4007 or equivalent Blocking Voltage 1000V, Current 1A RKD4D/E TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings Current b Cat. No. 2321.2 10 Current Voltage 400V c Circuit Cat. No. Std. Pk RKD4D/F RKD4D/G 1 2 2322.2 2323.2 10 10 For Accessories, refer to page 24 Application Diagrams Internal Jumper to next block for additional circuits, any signal turns on the lamp Lamp Signal Feed Through Signal Signal Signal Collective Fault Message Test Test Internal jumper to next block Internal jumper to next block for more loads Lamp Load Load Lamp Test Circuit Power Distribution Lamp Test Circuit Terminal Block Circuits 1 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 67 70 69 67 70 Max. Number of Tags/Block Side 4 2 2 4 2 2 a Refer to the page no. indicated for additional selection and ordering information. 28 b 10A top level feed-through,1A signal, 27A jumper 40 20 TM2 c 1A per line, 27A jumper Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT THERMOCOUPLE ➤ 35 or 32mm DIN Rail CATALOGS FIND IT ➤ 48mm (1.89 in.) ➤ TS35x7.5 47mm (1.85 in.) ➤ TS32x15 62mm (2.05 in.) To minimize measuring errors in thermocouple circuits, it is advantageous to use Thermocouple terminal blocks. Altech's Thermocouple block consists of two standard RK2.5 housings, containing busbars made of the same materials as the thermocouple wires. By matching busbar and wire materials, thermovoltage deviations are eliminated within the Thermocouple block, improving the quality of temperature measurements. Thermocouple type, polarity and busbar materials are clearly indicated on each block. • High Density, Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige • Integral Top Marking Indicates Type, Polarity, and Busbar Materials TSK2.5 TS35 x 7.5 TS35 x 15 TS32 x 15 Terminal Width 10mm (.394) Stripping Length 7mm (.275) Screw Hole Diameter 3mm (.118) TS15 x 5.5 Ratings IEC Wire Range 0.2-2.5mm2 22-12 AWG Ordering Information Type Cat. No. Std. Pk. Thermocouple Terminal Block (See specifications below for busbar material) TSK2.5/T TSK2.5/J TSK2.5/E TSK2.5/K TSK2.5/S TSK2.5/R 1200.2 1201.2 1202.2 1203.2 1204.2 1205.2 10 10 10 10 10 10 End Plate (page 58)a AP2.5-10 2001.2 50 Isolation Partition (page 58)a TW2.5-10 2002.2 50 End Stop for 35mm Rail (page 56)a for 32mm Rail (page 56)a ES35 ES32 2005.2 2004.2 50 50 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m Suitable Marking Tags (Shaded) AS3 SB5 Refer to this page for Selection 69 66 70 Max. Number of Tags Per Side 8 4 2 40 20 SB6 BR5 BR6 TM1 TM2 a Refer to the page no. indicated for additional selection and ordering information. THERMOCOUPLE SPECIFICATIONS Type Thermocouple Materials Wire Busbars Terminal Cat. No. Block Type T Copper/Constantan Copper/Constantan (Cu/CuNi 44) (Cu/CuNi 44) Copper/Constantan (Cu/CuNi 44) TSK2.5/T 1200.2 E Chromel/Constantan Chromel/Constantan NiCr/CuNi 44) (NiCr/CuNi 44) Chromel/Constantan TSK2.5/E (NiCr/CuNi 44) 1202.2 J Iron/Constantan (Fe/CuNi 44) Iron/Constantan (Fe/CuNi 44) Iron/Constantan (Fe/CuNi 44) TSK2.5/J 1201.2 K Chromel/Alumel (NiCr/NiAl) Chromel/Alumel (NiCr/NiAl) Chromel/Alumel (NiCr/NiAl) TSK2.5/K 1203.2 S Platinum -Rhodium 10% Platinum PtRh/Pt Copper/Copper-Nickel Copper/Copper TSK2.5/S 1204.2 Platinum-Rhodium 13% Platinum PtRh/Pt Copper/Copper-Nickel Copper/Copper TSK2.5/R 1205.2 R (E-Cu/A-Cu) (E-Cu/A-Cu) (E-Cu/A-Cu) Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 29 THREE WIRE SENSOR CATALOGS FIND IT ➤ ➤ 64mm (2.52 in.) ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ 64mm (2.52 in.) 35 or 32mm DIN Rail Upper Level Signal Middle Level Jumper Lower Level Jumper AP/RKT2.5 End Plate Fig. 1 One or more IKT2.5 Signal 1 DC (-) Bus to Device (+) Bus IK2.5NPN Fig. 2a Signal 1 DC to (-) Bus Device IK2.5PNP Fig. 2b TS32x15 63mm (2.48 in.) ➤ TS35x7.5 58mm (2.28 in.) TS32x15 63mm (2.48 in.) ➤ TS35x7.5 58mm (2.28 in.) Side 1 Side 2 Side 2 Side 1 IK2.5 IK2.5PNP IK2.5NPN LED Status Indication TS35 x 7.5 TS35 x 15 TS32 x 15 TS15 x 5.5 Ratings IEC (File No. E95701 ) (File No. LR42110) Ordering Information Three Wire Sensor Terminal Block Terminal Block for PNP (Pos. Switching) Red LED Indicatora (Fig. 2b) 12V DC (E) 24V DC (G) 48V DC (J) 60V DC (K) Other voltages available upon request Terminal Block for NPN (Neg. Switching) Red LED Indicatora (Fig. 2a) 12V DC (E) 24V DC (G) 48V DC (J) 60V DC (K) Other voltages available upon request Feed Through Terminal Block with Red and Blue Color Coding to Match IK2.5 End Plate (page 58)b End Stop for 35mm Rail (page 56)b for 32mm Rail (page 56)b Internal Jumpers (page 61)b 2 pole 3 pole 4 pole 10 pole 20 pole DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)b 2m (6'-6") long (page 54)b Suitable Marking Tags (Shaded) (+) Bus ➤ (blue) (red) One or more IK2.5, IK2.5 PNP or IK2.5 NPN ➤ Save wiring and installation time by terminating three wire devices such as proximity switches, sensors, etc. in one terminal block. The upper level accepts feed-through logic or control signals. The middle and lower levels distribute power. (Use Type Q internal jumpers) Use Type IKT2.5 FeedThrough terminal blocks anywhere in the assembly to connect the power supply. Use red (lower level) for DC+ or blue (middle level) for DCdistribution. (Refer to Connection Diagrams below.) Types IK2.5PNP (positive switching) and IK2.5NPN (negative switching) are equipped with LEDs to indicate the status of individual circuits. • High Density, Sectional • Screw-Cage Clamp • Universal Foot • Polyamide 6.6 • Standard Color: Beige Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.2-2.5mm2 22-12 AWG Current 20A 20A 20A Voltage 250V 300V 300V Type Cat. No. Std. Pk. IK2.5 1260.2 Current 10A Type Cat. No. Std. Pk. IK2.5PNPE IK2.5PNPG IK2.5PNPJ IK2.5PNPK 7705.5 1262.2 1271.2 1273.2 10 10 10 10 IK2.5NPNE IK2.5NPNG IK2.5NPNJ IK2.5NPNK 7705.4 1264.2 1277.2 1279.2 10 10 10 10 100 AP/IK2.5 ES35/2K ES32 2698.2 2826.2 2004.2 20 50 50 AP/IK2.5 ES35/2K ES32 2698.2 2826.2 2004.2 20 50 50 Q21 Q31 Q41 Q101 Q201 2422.0 2423.0 2424.0 2425.0 2700.0 50 50 20 10 10 Q21 Q31 Q41 Q101 Q201 2422.0 2423.0 2424.0 2425.0 2700.0 50 50 20 10 10 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 TM2 AS3 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection 69 66 70 69 66 70 Max. Number of Tags Per Side 6/2c 3/1c 3/1c 6/2d 3/1d 3/1d a Connection Diagrams 30 Green LEDs available Refer to the page no. indicated for additional selection and ordering information. b c The first number indicates Side 1. The second number indicates Side 2. d The first number indicates Side 1. The second number indicates Side 2. Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 40 20 TM2 TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ ➤ ➤ 86mm (3.39in.) CATALOGS FIND IT ➤ 86mm (3.39in.) ➤ TS35x7.5 58mm (2.28 in.) TS32x15 63mm (2.48 in.) ➤ TS35x7.5 58mm (2.28 in.) TS32x15 63mm (2.48 in.) ➤ ➤ IKT2.5 IKT2.5U/M IKT2.5U/L LED Status Indication 180 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) 180 Terminations Per Foot Terminal Width 5mm (.197) Stripping Length 7mm (.276) Screw Hole Diameter 3mm (.118) Wire Range 0.2-2.5mm 22-12 AWG 22-12 AWG Volts 400V 300V 300V Wire Range 0.2-2.5mm 2 22-12 AWG Std. Pk. Type Type Current 24A 20A 20A Cat. No. IKT2.5 Shown is a typical proximity switch connection. An assembly with IK2.5 Three-Wire Sensor terminal blocks and one IKT2.5 Feed-Through terminal block per Connection Diagram on facing page. Current 10A Cat. No. Std. Pk. IKT2.5U/ME IKT2.5U/MG IKT2.5U/MJ IKT2.5U/MK 8803.4 8804.4 8805.4 8806.4 10 10 10 10 IKT2.5U/LE IKT2.5U/LG IKT2.5U/LJ IKT2.5U/LK 8803.5 8804.5 8805.5 8806.5 10 10 10 10 1295.2 50 AP/RKT2.5 2699.2 ES35/2K 2826.2 ES32 2004.2 20 50 50 AP/RKT2.5 ES35/2K ES32 2699.2 2826.2 2004.2 20 50 50 Q21 Q31 Q41 Q101 Q201 50 50 20 10 10 Q21 Q31 Q41 Q101 Q201 2422.0 2423.0 2424.0 2425.0 2700.0 50 50 20 10 10 2422.0 2423.0 2424.0 2425.0 2700.0 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 40 20 TM2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 SB6 BR5 BR6 TM1 69 66 70 69 66 70 6 3 3 6 3 3 40 20 TM2 Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 31 GROUND CATALOGS FIND IT ➤ ➤ 52mm (2.05 in.) ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT ➤ 52mm (2.05 in.) ➤ 35 and 32mm DIN Rail TS15x5.5 Ratings IEC (File No. E95701 ) (File No. LR42110) Terminal Width 6mm (.236) Stripping Length 10mm (.394) Screw Hole Diameter 4mm (.158) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Ordering Information Type Ground Block for 35mm Rail SLN2.5/35 DIN Rail, 35mm Perforated 1m (3'-3") long (page 54)a 2m (6'-6") long (page 54)a TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 Cat. No. Max. Number of Tags Per Side Refer to the page no. indicated for additional selection and ordering information. • High Density • Screw-Cage Clamp • Special Clamping Foot • Polyamide 6.6 • Color: Green/Yellow 1058.2 100 40 20 SB5 SB6 BR5 BR6 TM1 Refer to this page for Selection a Std. Pk TM2 Type Cat. No. SL2.5/35 Std. Pk 1056.2 100 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 40 20 SB5 SB6 BR5 BR6 TM1 79 81 69 67 70 71 1 1 4 2 1 — TM2 cReduced height for use with types SRK2.5 (Cat. No. 1030.2 and RK1.5-4 (Cat. No. 1015.2) ➤ ➤ ➤ 48mm (1.89 in.) TS32x15 43mm (1.69 in.) TS32x15 52mm (2.05 in.) ➤ 40mm (1.57 in.) ➤ TS32x15 Terminal Width 6mm (.236) Stripping Length 10mm (.394) Screw Hole Diameter 4mm (.158) Suitable Marking Tags (Shaded) Order Ground blocks either for 35mm or 32mm DIN Rail. TS35x7.5 47mm (1.85 in.) TS35x7.5 39mm (1.54 in.) TS35 x 15 SL2.5/35 ➤ They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags. SLN2.5/35c 35mm DIN Rail TS35 x 7.5 ➤ Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN rail ➤ Ground blocks clamp mechanically into the DIN rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. ➤ Use Ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Also, see Multi-Termination Double Level, Feed-Through with Ground Blocks on page 19. ➤ ➤ Mini Ground Blocks for 15mm DIN Rail are shown on page 37. 32mm DIN Rail TS35 x 7.5 TS35 x 15 TS32x15 TS15x5.5 SL2.5/32 SLN2.5/32d Terminal Width 6mm (.236) Stripping Length 10mm (.394) Screw Hole Diameter 4mm (.158) Terminal Width 6mm (.236) Stripping Length 10mm (.394) Screw Hole Diameter 4mm (.158) Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG Wire Range 0.2-2.5mm 2 22-12 AWG 22-12 AWG 3 1 Ratings IEC (File No. E95701 ) (File No. LR42110) 2 4 1 2 3 4 5 Type Cat. No. Ground Block for 32mm Rail SLN2.5/32 DIN Rail, 32mm Unperforated 1m (3'-3") long (page 54)b 2m (6'-6") long (page 54)b TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m Std. Pk 1057.2 100 24 12 Type Cat. No. SL2.5/32 Std. Pk 1055.2 100 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m 24 12 5 Insulated Housing Screw Cage Clamp Center Mounting Screw Mounting Clamp 35mm DIN Rail 32 Ordering Information Suitable Marking Tags (Shaded) AS3 Refer to this page for Selection Max. Number of Tags Per Side b Refer to the page no. indicated for additional selection and ordering information. SB5 SB6 BR5 BR6 TM1 TM2 AS3 SB5 SB6 BR5 BR6 TM1 79 81 69 67 70 71 1 1 4 2 1 — d Reduced height for use with types SRK2.5(Cat. No. 1030.2 and RK1.5-4 (Cat. No. 1015.2) Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 TM2 ➤ ➤ 56mm (2.20 in.) 50mm (1.97 in.) ➤ 58mm (2.28 in.) ➤ ➤ TS35x7.5 58mm (2.28 in.) Terminal Width 10mm (.394) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) Wire Range 0.2-4mm2 22-10 AWG 22-10 AWG Wire Range 0.2-10mm2 20-6 AWG 20-6 AWG Type Cat. No. SL4/35 Std. Pk 1212.2 100 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m 40 20 SB5 SB6 BR5 BR6 TM1 TM2 Type Cat. No. SL10/35 Std. Pk 1213.2 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 SB5 TS35x7.5 71mm (2.80 in.) ➤ TS35x7.5 47mm (1.85 in.) ➤ TS35x7.5 47mm (1.85 in.) Terminal Width 8mm (.315) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) ➤ ➤ ➤ ➤ SL16/35 SL10/35 SL4/35 AS3 ➤ ➤ ➤ ➤ 56mm (2.20 in.) CATALOGS FIND IT ➤ TERMINAL BLOCKS CONTENTS PREVIOUS HOME NEXT SB6 BR5 BR6 TM1 Terminal Width 12mm (.512) Stripping Length 15mm (.591) Screw Hole Diameter 6mm (.236) Terminal Width 16mm (.630) Stripping Length 20mm (.787) Screw Hole Diameter 7mm (.276) Wire Range 2.5-16mm 2 10-4 AWG 10-4 AWG Wire Range 2.5-35mm 2 10-2 AWG e 10-2 AWG e Type Cat. No. 80 SL16/35 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m TM2 SL35/35 AS3 Std. Pk 1197.2 SB5 SB6 BR5 BR6 TM1 Type Cat. No. 50 SL35/35 40 20 TS35x7.5/P1 2094.0/1m TS35x7.5/P2 2094.0/2m AS3 TM2 Std. Pk 1199.2 20 40 20 SB5 SB6 BR5 BR6 TM1 69 67 70 71 69 67 70 71 69 67 70 69 67 70 4 2 1 — 4 2 1 — 4 2 1 4 2 1 TM2 e Pending ➤ ➤ ➤ ➤ TS32x15 52mm (2.05 in.) TS35x7.5 63mm (2.48 in.) ➤ TS32x15 52mm (2.05 in.) ➤ SL10/32 ➤ ➤ ➤ ➤ SL4/32 58mm (2.28 in.) TS35x7.5 71mm (2.80 in.) ➤ ➤ 50mm (1.97 in.) ➤ ➤ 56mm (2.20 in.) ➤ ➤ 56mm (2.20 in.) SL16/32 SL35/32 Terminal Width 8mm (.315) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) Terminal Width 10mm (.394) Stripping Length 12mm (.472) Screw Hole Diameter 4mm (.158) Terminal Width 12mm (.512) Stripping Length 15mm (.591) Screw Hole Diameter 6mm (.236) Terminal Width 16mm (.630) Stripping Length 20mm (.787) Screw Hole Diameter 7mm (.276) Wire Range 0.2-4mm2 22-10 AWG 22-10 AWG Wire Range 0.2-10mm2 20-6 AWG 20-6 AWG Wire Range 2.5-16mm 2 10-4 AWG 10-4 AWG Wire Range 2.5-35mm 2 10-2 AWGf 10-2 AWGf Type Cat. No. SL4/32 Std. Pk 1065.2 100 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m AS3 SB5 SB6 BR5 BR6 TM1 24 12 TM2 Type Cat. No. SL10/32 Std. Pk 1066.2 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m AS3 SB5 SB6 BR5 BR6 TM1 Type Cat. No. 80 SL16/32 24 12 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m TM2 AS3 SB5 Std. Pk 1196.2 SB6 BR5 BR6 TM1 69 67 70 71 69 67 70 71 69 67 70 4 2 1 — 4 2 1 — 4 2 1 Type Cat. No. 50 SL35/32 24 12 TS32x15/U1 2025.0/1m TS32x15/U2 2025.0/2m TM2 AS3 Std. Pk 1198.2 SB5 SB6 BR5 BR6 TM1 69 67 70 4 2 1 20 24 12 TM2 f Pending Altech Corp.® • 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 33