Inductive sensors Special-purpose design Type N40 Model description Part number 15 mm sensing distance 20 mm sensing distance Flush design Non-flush design M12 plug/PNP NO contact M12 plug/PNP NC contact M12 plug/PNP NO contact M12 plug/PNP NO contact KIB-N40PS/015-KLS12 650.2988.001 KIB-N40PÖ/015-KLS12 650.2788.001 KIN-N40PS/020-KLS12 650.2982.003 KIN-N40PÖ/020-KLS12 650.2782.001 Dimensions Type N40 – Ring sensor Ring sensor Ø 16 mm Slot sensor 3 mm slot width 6 m cable 2 m cable Type S03 – Slot sensor PNP-NO contact Model description Part number Dimensions 156 KIR-N40PS/000-KL6 650.2999.036 NPN-NO contact KIR-N40NS/000-KL6 660.2399.375 PNP-NO contact KIN-S03PS/003K2 650.2999.035 NPN-NO contact – Type N40, cable version Type SO3, slot sensor Type N40, plug version I I Accessories Cable couplings see page 284 ff. General data N40 flush Operating voltage Rated operating voltage Switching hysteresis Reproducibility Switching frequency Output Polarity reversal protection Rated switching distance Functions-/operating voltage display Ambient temperature Protection class Enclosure Connection UB IB H R F sn mm2 N40 non-flush N40 Ring sensor 10–36 V N40 Slot sensor 10–30 V ≤ 200 mA 10% from rated switching distance – ≤ 5% 100 Hz 15 mm l/– 50 Hz 4000 Hz continuous short-circuit- and overload proof yes 20 mm Immersion approx. 20 mm Immersion approx. 7 mm l/– l/– –/– – 25 °C to + 70 °C IP 67 according to IEC 529, EN 60 529 PA6 PA6 S12 plug cable 3 x 0.5 mm2 cable 3 x 0.14 mm2 157 Sensors Wiring diagrams