Technical Data Sheet Metallized Polypropylene Film Capacitors Dielectric: metallized polypropylene Wound capacitor technology Plastic case (UL 94 V-0) Epoxy resin sealing h 3,5±0,5 • • • • b 0,8 Construction B32656-S0684-+504 Semikron 46,0 max Product Code: Customer Customer Ref Plastic Case 14,0 min Delivery Mode • Bulk Dimensions • Width (Bmax): • Height (H max): • Length (L max): Electrical Characteristics 5,0 EPCOS logo Rated capacitance Capacitance tolerance (code letter) Rated DC voltage Date of manutacture (code) Rated capacitance C: Capacitance tolerance code (14th digit): Rated DC voltage UN: Temperature Range (Case) Climatic category according to IEC 68-1 Test voltage terminal to terminal: Insulation resistance terminal to terminal Loss factor (tang δ) @ 20ºC: Pulse handling capability Irms (100KHz and case temperature < 105°C) Irms (1MHz and case temperature < 105°C) Self-inductance (typical value) ESR @ 1 MHz (typical value) Issued by: Edmundo Werner Neto, FK EDC Ed.: 2 Notes: Please take all additional data not mentioned above from our data book l • • • • • 33,0±1,5 30,0±1,5 6,6 Marking • Copper flat terminals, tinned 12,0 Terminals 7,0±0,5 45 +1/-0,5 8,1 20,0 mm 40,0 mm 42,0 mm 0,68 µF J = ± 5%, K = ± 10% 1000 Vdc -55 to +105°C 55/105/56 1800Vdc for 2s 44 G -3 (1 KHz) 0,5x10 -3 0,8x10 (10 KHz) 800 V/µs 17 A (approximately 40Vrms@100KHz) 22 A (approximately 4,6Vrms@1MHz) 6 nH 10 m Date: July, 09th/2007 EPCOS AG 2007. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.