Technical Data Sheet
Metallized Polypropylene Film Capacitors
Product Code:
Customer Ref
Plastic Case
28,0 ± 0,5
20,0 ± 0,5
• Flat terminals, tinned
Dielectric: metallized polypropylene
Wound capacitor technology
Plastic case (UL 94 V-0)
Epoxy resin sealing
EPCOS logo
Rated capacitance
Capacitance tolerance (code letter)
Date of manutacture (code)
Delivery Mode
• Bulk
• Width (Bmax):
• Height (H max):
• Length (L max):
Rated capacitance C:
Capacitance tolerance code (14th digit):
Rated DC voltage UN:
Rated AC voltage URMS:
Temperature Range (Case)
Climatic category according to IEC 68-1
Test voltage terminal to terminal:
Insulation resistance terminal to terminal
Loss factor (tang δ) @ 20ºC:
Pulse handling capability:
IRMS (at 100kHz, +70°C)
Issued by: Edmundo Werner Neto, FK EW
Ed.: 2
Notes: Please take all additional data not mentioned above from our data book
Min 10,2
0,8 ± 0,05 mm
6± 0,2
H max
B max
L max
30,0 mm
45,0 mm
42,0 mm
1,2 µF
± 10% (K)
1000 Vdc
500 Vac
-55 to +100°C
1,6 UN for 10s
25 G
(10 KHz)
450 V/µs
Date: March, 04th/2005
 EPCOS AG 2001. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained
therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are
subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German
Electrical and Electronic Manufacturers' Association), unless otherwise agreed.