RoHS Power Chip Inductors Dimensions: Inches (mm) 0.118 Max (3.00) 0.510 Max (12.95) 0.300 (7.62) 0.370 (9.40) Max PCI30 0.100 (2.54) 0.114 (2.92) 0.100 (2.54) 0.109 (2.79) 0.290 (7.37) Features DCR ( Ω) Max. Isat (A) Max. 20 0.024 5.15 4.7 20 0.036 4.20 PCI30-6R8M-RC 6.8 20 0.060 3.90 PCI30-8R2M-RC 8.2 20 0.080 2.42 PCI30-100M-RC 10 20 0.110 2.40 PCI30-150M-RC 15 20 0.120 2.30 PCI30-220M-RC 22 20 0.180 1.80 PCI30-330M-RC 33 20 0.250 1.60 PCI30-470M-RC 47 20 0.320 1.30 inductance range. PCI30-680M-RC 68 20 0.540 1.10 Test Frequency: Inductance measured PCI30-101M-RC 100 20 0.690 0.87 PCI30-151M-RC 150 20 0.940 0.74 Operating Temp. Range: i-40° to +125ºC ll Saturation Rated Current: The current PCI30-221M-RC 220 20 1.600 0.56 when the inductance becomes 10% lower PCI30-331M-RC 330 20 2.150 0.50 than its initial value. (Ta=25ºC) PCI30-471M-RC 470 20 3.300 0.40 PCI30-681M-RC 680 20 4.400 0.33 PCI30-821M-RC 820 20 5.800 0.15 PCI30-102M-RC 1000 20 8.400 0.10 Allied Part Number Inductance (µh) PCI30-1R0M-RC 1.0 PCI30-4R7M-RC Tolerance (%) • Low Profile • Designed with high heat resistant materials for reflow operation • Wrap around terminals for excellent solder quality and inspection • Flat top for pick and place assembly • Non-standard values available Electrical Inductance Range: 1.0µh to 1000µh. Tolerance: ± 20% over the entire at 100KHz, 0.1 Vrms. After soldering, push Physical Marking: EIA Inductance Code Packaging: 1000 pieces per 13 inch reel. All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 10/08/2015 www.alliedcomponents.com