RoHS PCI50 Power Chip Inductors Dimensions: Inches (mm) 0.510 Max (12.95) 0.300 (7.62) 0.370 (9.40) Max 0.450 Max (11.43) 0.100 (2.54) 0.110 (2.79) D 0.100 (2.54) Allied Part Number Inductance (µh) 0.118 (3.00) Tolerance (%) SRF (MHz) TYP. DCR Max. ( Ω) Isat (A) Irms (A) PCI50-2R2M-RC 2.2 20 40 .012 18 7.8 PCI50-4R7M-RC 4.7 20 25 .033 8.0 3.5 PCI50-100M-RC 10 20 22 .033 8.0 3.5 PCI50-150M-RC 15 20 18 .042 7.0 3.0 PCI50-220M-RC 22 20 11 .054 5.5 2.5 PCI50-330M-RC 33 20 9.0 0.08 4.0 2.0 0.290 (7.37) Features • High current capacity in a small foot print • High energy storage and low DCR • Designed with high heat resistant materials for reflow operation • Wrap around terminals for excellent solder quality and inspection • Flat top for pick and place assembly • Non-standard values available Electrical PCI50-470M-RC 47 20 8.0 0.10 3.8 1.6 Inductance Range: 2.2µ h to 1000µh. Tolerance: ± 20% over the entire PCI50-680M-RC 68 20 7.0 0.17 3.0 1.2 inductance range. Test Frequency: Inductance measured PCI50-101M-RC 100 20 5.0 0.22 2.5 1.2 at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to +85°C.ll PCI50-151M-RC 150 20 4.0 0.34 2.0 0.9 0.44 1.6 0.7 0.70 1.2 0.6 Inductance Drop: 20% typical at the rated Isat.0 to 2000) x 10 -6°C. PCI50-221M-RC 220 20 3.5 Temperature Rise: ∆T=40ºC rise typical at Irms. PCI50-331M-RC 330 20 2.5 Physical PCI50-471M-RC 470 20 2.0 0.95 1.0 0.3 Marking: Previously marked with 3 dot color code system PCI50-681M-RC 680 20 2.0 1.20 1.0 0.2 PCI50-102M-RC 1000 20 1.5 2.00 0.8 0.1 Packaging: 225 pieces per 13 inch reel. All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 11/24/2015 www.alliedcomponents.com