RoHS PS100 Power Shielded Inductor .444 11.3 Dimensions: .381 9.7 Inches (mm) .406 10.3 .444 11.3 .062±.007 1.6±0.2 .271 6.9 .118±.007 3.0±0.2 .141 3.6 .086 2.2 Allied Part Number Inductance (µH) Tolerance (±%) Test Frequency (KHz, 0.5V) RDC mΩ Max Isat (A) Max Irms (A) Max PS100-R22M-RC .22 20 100 1.60 55 22 PS100-R33M-RC .33 20 100 1.60 42 22 PS100-R47M-RC .47 20 100 1.85 36 20 PS100-R56M-RC PS100-R68M-RC PS100-R82M-RC .56 .68 .82 20 20 20 100 100 100 1.85 2.65 2.65 32 28 24 20 17 17 PS100-1R0M-RC PS100-1R5M-RC PS100-2R2M-RC PS100-3R3M-RC 1.0 1.5 2.2 3.3 20 20 20 20 PS100-4R7M-RC PS100-6R8M-RC PS100-8R2M-RC PS100-100M-RC 4.7 6.8 8.2 10.0 20 20 20 20 100 100 100 100 100 100 100 100 2.65 4.00 5.30 7.70 10.8 16.9 16.9 26.0 21 17 14 10 8.5 7 6 5 17 13.5 12 11 10 9 9 7 All specifications subject to change without notice. Features • • • • • SMD Ultra High Current up to 50 Magnetically Shielded Construction Designed for low buzz noise Low DC Resistance Suitable for pick and place Electrical Inductance Range: .22µH to 10µH additonal values available. Tolerance: 20% over entire range Available in tighter tolerances Test Frequency: 100KHz Operating Temp: -40ºC to +125ºC Temp. Rise: ∆ =40ºC Typical at rated Irms without without core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance drop: 20% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): WK 4237 Meter RDC: HK502BC Meter Isat/Irms: WK3260B & DC Bias 3265B WK Physical Packaging: 400 pieces per 13 inch reel. Marking: EIA Inductance Code 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED157/17/15 www.alliedcomponents.com