Download Data Sheet

DTEA1170 SERIES
130~180 Watts
AC/DC Desktop Power Supply
Single Output
Rev A
Size: 7.04in x 2.56in x 1.57in (179mm x 65mm x 40mm)
OPTIONS
• AC Inlet
-IEC320 C14
-IEC320 C8
-IEC320 C6
-IEC320 C18
FEATURES
•
•
•
•
•
Active PFC Function
• Short Circuit, Over Voltage, Over Current, and
Over Temperature Protection
CEC Compliant
• LED Indication
RoHS Compliant
Four AC Inlets Available: IEC320 C14, C8, C6, C18 • UL/cUL UL60950, TUV/GS EN/IEC 60950, CB,
FCC, and CCC Safety Approvals
MTBF >30,000
DESCRIPTION
The DTEA1170 series of AC/DC desktop power supplies provides up to 180 watts of continuous output power. All models have a single output and a wide
input voltage range of 100~240VAC. This series is Energy Star Level VI, CEC and RoHS compliant and has over voltage, over current, over temperature
and short circuit protection. Each model has UL/cUL UL60950, TUV/GS EN/IEC 60950, CB, FCC and CCC safety approvals. This series also has four AC
inlet connector types available: IEC320 C14, C8, C6, and C18. Optional output connectors are also available. Please call factory for ordering details.
MODEL SELECTION TABLE
Model Number(4)
DTEA1170xA
DTEA1170xB
DTEA1170xC
DTEA1170xD
DTEA1170xE
DTEA1170xF
DTEA1170xG
DTEA1170xH
DTEA1170xJ
DTEA1170xK
DTEA1170xM
DTEA1170xN
DTEA1170xP
DTEA1170xQ
DTEA1170xR
DTEA1170xS
2/9/2016
Input Voltage Range
Output Voltage
100-240VAC
12~16
19~24
12~16
19~24
12~16
19~24
32~42
44~56
32~42
44~56
12~16
19~24
19~24
19~24
32~42
44~56
Output Current
Min Load
Max Load
0
10.83A
0
6.84A
0
11.66A
0
7.36A
0
12.5A
0
7.89A
0
4.68A
0
3.12A
0
4.06A
0
2.95A
0
13.33A
0
8.42A
0
8.94A
0
9.47A
0
5.62A
0
3.75A
Ripple & Noise(1)
Output Power(2)
240mV
360mV
240mV
360mV
240mV
360mV
630mV
840mV
640mV
840mV
240mV
360mV
360mV
360mV
630mV
840mV
130W
130W
140W
140W
150W
150W
150W
150W
130W
130W
160W
160W
170W
180W
180W
180W
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 1 of 3
DTEA1170 SERIES
130~180 Watts
AC/DC Desktop Power Supply
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
240
VAC
60
Hz
INPUT SPECIFICATIONS
Input Voltage Range
100
Input Frequency
50
Input Current
Inrush Current
At Cold Start
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation(3)
Load Regulation
Hold Up Time
Turn On Time
Output Power
Output Current
Ripple & Noise (20MHz bandwidth)
PROTECTION
Short Circuit Protection
Over Current Protection
≤2.5
A
≤100
A
See Table
±1
±5
≥8.3
≤3
See Table
See Table
See Table
%
%
mS
S
Auto Recovery
Auto Recovery
Over Voltage Protection
Latch Off
Over Temperature Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Latch Off
Storage Temperature
Storage Humidity
0
40
ºC
-20
85
ºC
5
MTBF
GENERAL SPECIFICATIONS
Efficiency
PHYSICAL SPECIFICATIONS
Weight
95
%
>30,000
hours
Meets CEC Level V, VI
1.55 lbs (705 g)
7.04in x 2.56in x 1.57in
(179mm x 65mm x 40mm)
C14, C8, C6, C18
Dimensions (L x W x H)
AC Inlet
SAFETY
UL/CUL UL60950
TUV/GS EN/IEC 60950
CB
FCC
CCC
Safety
NOTES
(1)
(2)
(3)
(4)
2/9/2016
Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel
with 47uF aluminum capacitor at full load and nominal line.
Max output power (W) ≥Vo x Io
Line Regulation is defined by changing ±10% of input voltage from nominal line at rated load.
x in model number indicates case type: 1=C14, 2=C8, 3=C6, 6=C18
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 2 of 3
Rev A
DTEA1170 SERIES
130~180 Watts
AC/DC Desktop Power Supply
Single Output
MECHANICAL DRAWINGS
Mechanical Specifications
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
2/9/2016
(603)778-2300
(888)597-9255
(603)778-9797
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 3 of 3