Download Data Sheet

WMGPSU06 SERIES
AC DC Wall Mount Power Supplies
6 Watts
Single Output
Rev A
U Type: American
E Type: European
S Type: 3-Pin Australian
SA Type: 2-Pin Australian
BS Type: UK
Size: 2.6in x 1.26in x 1.67in
Size: 2.6in x 1.26in x 1.67in
Size: 2.94in x 1.64in x 1.69in
Size: 2.94in x 1.64in x 1.69in
Size: 2.83in x 1.97in x 1.69in
OPTIONS
FEATURES
• Plug Type
• Output Cable
• Output Voltage
• Universal Input Voltage Range of
100~240VAC
• Meets Efficiency Level VI
• Passes LPS
• Single Outputs
• Optional Output Connectors Available
• Compact Package
• High Efficiency and Reliability
• Compact Package
• UL60950-1, CSA C22.2, EN60950-1, and IEC60950-1
Safety Approvals
• Over Voltage, Over Current, and Short Circuit Protection
• US, EU, 3-Pin Australian, 2-Pin Australian, or UK Plugs
Available
DESCRIPTION
The WMGPSU06 series of AC/DC wall mount power supplies offers up to 6 watts of output power in a compact package. Single outputs are
available for this series with an input range of 100 to 240VAC, 50 to 60Hz. Five different plug types are available in this series: American plug type,
European plug type, 3-pin and 2-pin Australian plug types, and UK plug type. The series is protected against short circuit, over voltage, and over
current conditions and is Efficiency Level VI compliant. This series offers high efficiency and reliability and optional output connectors are
available. Please call factory for ordering details.
MODEL SELECTION TABLE
Model Number(1)
WMGPSU06x-1
WMGPSU06x-1-1
WMGPSU06x-2
WMGPSU06x-3
WMGSPU06x-4
WMGSPU06x-5
WMGPSU06x-6
WMGPSU06x-7
WMGPSU06U-8
12/22/2015
Input Voltage
Range
Output
Ripple &
Output Current
Voltage
Noise
5~6VDC
1.00~0.80A
50mV
6~8VDC
1.00~0.75A
80mV
8~11VDC
0.75~0.54A
80mV
11~13VDC 0.54~0.46A
100mV
100~240VAC 13~16VDC 0.46~0.37A
120mV
16~21VDC 0.37~0.28A
150mV
21~27VDC 0.28~0.20A
180mV
27~33VDC 0.20~0.18A
200mV
33~48VDC 0.18~0.12A
200mV
No Load
Power Consumption
<0.5W
<0.5W
<0.5W
<0.5W
<0.5W
<0.5W
<0.5W
<0.5W
<0.5W
Output
Power
5W
6W
6W
6W
6W
6W
6W
6W
6W
Min.
Efficiency(2)
60%
65%
70%
74%
74%
74%
75%
75%
75%
Efficiency
Level
Level VI
Level VI
Level VI
Level VI
Level VI
Level VI
Level VI
Level VI
Level VI
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Measured at
Output
5
7.5
9
12
15
18
24
28
48
Page 1 of 5
WMGPSU06 SERIES
AC DC Wall Mount Power Supplies
6 Watts
Single Output
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Typ
Max
Unit
100
240
VAC
50
60
0.2
Hz
A
@115VAC at 25ºC Cold Start
@230VAC at 25ºC Cold Start
Inrush Current
30
60
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation
For any input voltage change
between input voltage range
Load Regulation
Variations from minimum to
maximum output current
A
See Table
±1
±0.5
±10
±6
±4
±3
See Table
See Table
See Table
3~5V
5~48V
3~5V
5~11V
11~21V
21~48V
Output Power
Output Current
Ripple & Noise
%
%
Set-Up Time
Maximum excursion of 4% or better on all models.
Recovering to 1% of final value within 500uS after a 25% step load
change
@Full Load
3000
mS
Hold-Up Time
@Full Load
10
mS
Rise Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
Over Voltage Protection
Over Current Protection(3)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Relative Humidity
Derating
MTBF
GENERAL SPECIFICATIONS
Efficiency
Insulation Resistance
Withstand Voltage
Leakage Current
PHYSICAL SPECIFICATIONS
Weight
@Full Load
All Outputs
50
Hiccup Mode
Protected by Zener diode
Auto-Recovery
Transient Response
Auto-Recovery
Non-Condensing
Derated from 100% at +40ºC linearly to 70% at 50ºC
@Full Load, 25ºC ambient
0
-40
5
40
85
95
ºC
ºC
%RH
100,000
hours
See Table
From Input to Output
From Input to Output
@240VAC/50Hz
50
4242
MΩ
VDC
mA
0.25
2.47~3.53oz (70~100g)
2.6in x 1.26in x 1.67in
(66mm x 32mm x 42.5mm)
2.94in x 1.46in x 1.69in
(74.6mm x 41.6mm x 43mm)
2.83in x 1.97in x 1.69in
(72mm x 50mm x 42.8mm)
U Type, E Type
Dimensions (L x W x H)
mS
%/ºC
±0.04
S Type, SA Type
BS Type
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMC
12/22/2015
UL60950-1; CSA C22.2
EN60950-1
IEC60950-1
(A) CE: Emission: EN55022 EN61000-3-2,3/Immunity: IEC61000-4-2,3,4,5,6,11
(B) FCC 47 CFR Part 15 Subpart B. ICES-003 Issue 4 ANSI C63.4-2003
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 5
Rev A
WMGPSU06 SERIES
AC DC Wall Mount Power Supplies
6 Watts
Single Output
NOTES
(1)
(2)
(3)
(4)
(5)
“x” in model name indicates the plug type. “U”= U type=American Plug, “E”= E Type=European plug, “S”= S Type= 3-Pin Australian plug, “SA”=
SA Type= 2-Pin Australian type, and “BS”= UK type, UK Plug.
Average Efficiency at 25, 50, 75, and 100% load
Standard Series: Rated output current >110% for primary-referenced direct drive (Constant current series: Rated output current 80~200% for
secondary-reference direct drive)
Optional Output Connectors are available, please call factory for ordering details
Standard Output Cable:
5~11V: UL1185, 18AWG, 4FT
11~48V: UL2468, 24AWG, 6FT
DERATING CURVES
Constant Current Curve
Ambient Temperature Derating
Typical Static Characteristics
12/22/2015
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
Rev A
WMGPSU06 SERIES
AC DC Wall Mount Power Supplies
6 Watts
Single Output
MECHANICAL DRAWINGS
12/22/2015
U Type
E Type
S Type
SA Type
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
Rev A
WMGPSU06 SERIES
AC DC Wall Mount Power Supplies
6 Watts
Single Output
BS Type
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
12/22/2015
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5