WMIGPSU18 SERIES 18 Watts AC/DC Interchangeable Wall Mount Power Supply Rev A U Type E Type SA Type Size: 3.17 x 1.54 x 1.6in Size: 3.17 x 1.54 x 1.6in Size: 3.17 x 1.61 x 1.6in BS Type KR Type AR Type Size: 3.17 x 1.94 x 1.6in Size: 3.17 x 1.54 x 1.6in Size: 3.17 x 1.61 x 1.6in OPTIONS FEATURES • Output Connector • Output Voltage • Plug Type • • • • • Universal Input Voltage of 100~240VAC Output Voltages Ranging from 5~58VDC Efficiency Level VI Compliant Single Output Optional Output Connectors Available • Six Different Interchangeable Plugs Available • Over Voltage, Over Current, and Short Circuit Protection • UL60950-1; CSA C22.2, EN60950-1, IEC60950-1, and J60950 Safety Approvals • Low Leakage Current of <0.1mA DESCRIPTION The WMIGPSU18 series of AC DC interchangeable wall mount power supplies offers up to 18 watts of continuous output power. This series consists of single output models with output voltages ranging from 5 to 58VDC and a universal input voltage of 100~240VAC. Each model has over voltage, over current, and short circuit protection and all models are efficiency level VI compliant. Six different interchangeable plugs are available for this series: American type, European type, 2-Pin Australian type, UK type, Korean type, and Argentina type. Optional output connectors are also available for this series. Please call factory for ordering details. MODEL SELECTION TABLE Model Number(1) Input Voltage Range WMIGPSU18U-1 WMIGPSU18U-2 WMIGPSU18U-3 WMIGPSU18U-4 WMIGPSU18U-5 WMIGPSU18U-6 WMIGPSU18U-7 WMIGPSU18U-8 100~240VAC 12/21/2015 Output Voltage 5~6VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC Output Current 3.00~2.50A 2.25~1.64A 1.64~1.38A 1.38~1.13A 1.13~0.86A 0.86~0.67A 0.67~0.55A 0.55~0.32 Ripple & Noise 80mV 100mV 120mV 150mV 150mV 150mV 240mV 240mV No Load Power Consumption <0.075W Output Power 15W 18.04W 18.04W 18.08W 18.08W 18.09W 18.15W 18.56W Efficiency(2) Measured at Efficiency Output Level DoE (VI) CoC (5) 5 Level VI 81.39% 81.84% 9 Level VI 85% 85.45% 12 Level VI 85% 85.45% 15 Level VI 85% 85.45% 18 Level VI 85% 85.45% 24 Level VI 85% 85.45% 28 Level VI 85% 85.45% 48 Level VI 85% 85.45% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 5 Rev A WMIGPSU18 SERIES 18 Watts AC/DC Interchangeable Wall Mount Power Supply SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Leakage Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Min Typ 100 47 0.45 @240VAC/50Hz @115VAC at 25ºC cold start @230VAC at 25ºC cold start Set-Up Time Hold-Up Time Rise Time Temperature Coefficient PROTECTION Short Circuit Protection Over Current Protection 240 63 0.2 0.1 VAC Hz A mA Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500uS after a 25% step load change @Full Load @Full Load @Full Load All Outputs Hiccup Mode Hiccup Mode Rated Output Current A See Table ±1 ±5 ±3 See Table See Table See Table For any input voltage change between input voltage range 5~27V Variations from minimum to maximum output current 27~58V % % 3000 10 50 ±0.04 mS mS mS %/ºC Automatic Recovery Automatic Recovery 110 Over Voltage Protection Rated Output Voltage ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Storage Temperature Relative Humidity Non-Condensing Derating Derated from 100% at +40ºC linearly to 70% at 50ºC MTBF @Full load at 25ºC ambient GENERAL SPECIFICATIONS Efficiency Insulation Resistance From Input to Output Withstand Voltage From Input to Output PHYSICAL SPECIFICATIONS Weight U Type, E Type, KR Type Dimensions (L x W x H) Unit 50 90 Output Power Output Current Ripple & Noise Transient Response Max BS Type SA Type, AR Type % Protected by Zener diode 110 140 % 0 -40 5 40 85 95 ºC ºC % 100,000 Hours See Chart 50 MΩ VDC 4242 4.94~5.64oz (140~160g) 3.17 x 1.54 x 1.6in (80.5 x 39.1 x 40.7mm) 3.17 x 1.94 x 1.6in (80.5 x 49.4 x 40.7mm) 3.14 x 1.61 x 1.6in (80.5 x 41 x 40.7mm) SAFETY & EMC CHARACTERISTICS Safety Approvals EMC UL60950-1; CSA C22.2 EN60950-1 IEC60950-1 J60950 CE: Emission: EN55022: EN61000-3-2,3 Immunity: IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) “x” in each model name indicates the interchangeable plug type: “U”= U Type= American Plug, “E”= E Type= European Plug, “SA”=SA Type = 2Pin Australian Plug, “BS”= BS Type = UK Plug, “KR”= KR Type = Korean Plug, “AR”= AR Type” = Argentina Plug. Please call factory for ordering details. Averages the efficiency at 20, 50, 75, 100 of max. rated output current. Standard Output Cables: 5~11V: UL1571, 16AWG, 1M 11~13V: UL2468, 18AWG, 1M 13~58V: UL2468, 22AWG 5FT 12/21/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 Rev A WMIGPSU18 SERIES 18 Watts AC/DC Interchangeable Wall Mount Power Supply DERATING CURVES Derating Typical Static Characteristics E Type U Type MECHANICAL DRAWINGS 12/21/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 Rev A 12/21/2015 WMIGPSU18 SERIES 18 Watts AC/DC Interchangeable Wall Mount Power Supply SA Type BS Type KR Type AR Type Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev A WMIGPSU18 SERIES 18 Watts AC/DC Interchangeable Wall Mount Power Supply COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/21/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5