Download Data Sheet

DTSPU61A SERIES
60 Watts
AC DC Desktop Power Supplies
Single Outputs
Rev A
Size: 4.65in x 1.85in x 1.19in (118mm x 47mm x 30.3mm)
OPTIONS
FEATURES
• Output Cable
• Output Voltage
•
•
•
•
•
APPLICATIONS
•
•
•
•
•
•
Wide Operating Voltage of 90-264VAC
IEC-320-C14 Input Inlet
Optional Output Connectors Available
Single Output
RoHS Complaint
•
•
•
•
Class I
Energy Star Efficiency Level VI
Short Circuit and Over Current Protection
UL/c-UL (UL 60950-1-: 2nd Edition) and TUV/GS
(EN 60950-1: 2nd Edition) Safety Approvals
DESCRIPTION
POS System
AV Equipment
Industrial PC
Note PC
Charger
LED Lighting
The DTSPU61A series of AC DC desktop power supplies offers 60 watts of output power. This series
consists of single output models with a wide input operating voltage of 90-264VAC and output voltages
ranging from 12VDC to 48VDC. Each model is Efficiency Level VI as well as RoHS compliant and have
UL/c-UL (UL 60950-1: 2nd Edition) and TUV/GS (EN 60950-1: 2nd Edition) safety approvals. Models are
protected against short circuit and over current conditions and optional output connectors are available upon
request. Please call factory for ordering details.
MODEL SELECTION TABLE
Model Number(1)
DTSPU61A-105
DTSPU61A-106
DTSPU61A-107
DTSPU61A-108
DTSPU61A-109
DTSPU61A-110
DTSPU61A-111
2/12/2016
Output Current
Input Voltage
Range
Output
Voltage
Min.
Max.
90-264VAC
12~13VDC
13~16VDC
16~21VDC
21~27VDC
27~33VDC
33~40VDC
40~48VDC
4.61A
3.75A
2.85A
2.22A
1.81A
1.50A
1.25A
5.00A
4.61A
3.75A
2.85A
2.22A
1.81A
1.50A
Ripple & Noise
Total
Regulation
Output
Power
No Load Power
Consumption
Efficiency
100mVp-p.
5%
5%
5%
3%
3%
3%
3%
60W
0.5W
87% Min.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 1 of 4
DTSPU61A SERIES
60 Watts
AC DC Desktop Power Supplies
Single Outputs
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Low Line
Input Current
High Line
High Line Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage
Line Regulation(4)
Load Regulation(5)
Output Power
Output Current
Ripple & Noise(6)
Transient Response Time
Start-Up Time
Hold-Up Time(7)
Temperature Coefficient
No Load Power Consumption
PROTECTION
Over Load Protection
Short Circuit Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Electro Static Discharge
Operating Altitude
Vibration
Surge Voltage
Derate
MTBF
GENERAL SPECIFICATIONS
Efficiency(8)
Isolation Resistance
Dielectric Withstanding Voltage
Safety Ground Leakage Current
PHYSICAL SPECIFICATIONS
Weight
Safety Approvals Input Voltage Range
Operate Voltage Range
Sine Wave
Io=Full Load, Vin=100VAC
Io=Full Load, Vin=240VAC
Io=Full Load, 25ºC, Cool Start, Vin=240VAC
100
90
47
Io=Full Load
Vin=230VAC
0.5
3
240
264
63
VAC
Hz
1.45
1.45
A
105
A
See Table
Full Load, Vin=90VAC
Io=Full Load to Half Load, Vin=100VAC
Io=Full Load, Vin=100VAC
Io=Full Load, Vin=110VAC
Full Load, Vin=100~240VAC
No Load, Vin=230VAC
mVp-p
mS
S
mS
%/ºC
W
4
3
10
±0.04
0.5
110
10~95% RH
Non-Condensing
0
-40
0
0
Io=Full Load, Vin=230VAC
Test Voltage=500VDC
Primary to Secondary
Primary to PE
Vin=240VAC/60Hz
%
%
See Table
See Table
100
Recovers automatically after fault condition is removed
Air Discharge, IEC61000-4-2
Contact Discharge, IEC61000-4-2
All Conditions
10~500Hz, 10min./1cycle, 60min. each along X, Y, Z axes
Line-Neutral
Line-PE & Neutral-PE
Derate linearly from 100% load at 40ºC to 50% load at 70ºC
Operating temperature at 25ºC, calculated per MIL-HDBK-217F
1
5
150
Automatic Recovery
%
70
85
95
95
8
6
3000
5
1
2
ºC
ºC
%
%
kV
m
G
kV
100,000
Hours
87
50
%
MΩ
4242
2652
0.75
VDC
mA
11.99oz (340g)
4.65in x 1.85in x 1.19in
(118mm x 47mm x 30.3mm)
Dimensions (L x W x H)
SAFETY & EMC CHARACTERISTICS
Safety Approvals
EMC Emission
2/12/2016
UL/c-UL (UL 60950-1: 2nd Edition)
TUV/GS (EN 60950-1: 2nd Edtion)
Compliance to EN55022 (CISPR22)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 2 of 4
Rev A
DTSPU61A SERIES
60 Watts
AC DC Desktop Power Supplies
Single Outputs
NOTES
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
DTSPU61A-105~107 are required to use AWG#16/4FT output cable.
DTSPU61A-108~109 are required to use AWG#18/4FT output cable.
DTSPU61A-110~111 are required to use AWG#02/4FT output cable.
The electrical characteristics will be changed by modified output cable.
Output can provide up to peak load when the power supply starts up. Continuous staying in more than rated load is not allowed.
Each output is checked to be within voltage accuracy in 60% rated load condition.
Line Regulation is defined by changing ±10% of input voltage from nominal line at rated load.
Load Regulation is defined by changing ±40% of measured output load from 60% rated load.
Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47µF capacitor at rated load and
nominal line.
Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated
load and nominal line.
Efficiency measured at rated load and nominal line.
DERATING CURVES
Input Voltage Derating
Temperature Derating
MECHANICAL DRAWINGS
2/12/2016
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 3 of 4
Rev A
DTSPU61A SERIES
60 Watts
AC DC Desktop Power Supplies
Single Outputs
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
2/12/2016
(603)778-2300
(888)597-9255
(603)778-9797
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
Page 4 of 4