WMICP48 SERIES Up to 48 Watts, AC/DC Wall Mount Power Supplies Rev B Wall Industries, Inc. FEATURES Several other Pantone® colors available Size: 3.82 x 1.77 x 1.48 inches 97.0 x 45.0 x 37.6 mm Weight: 8.75oz (248g) • Class II • 5V~24VDC Single Output Models Available • RoHS Compliant • 90-264VAC Input Voltage Range • Up to 48 Watts Output Power • -20°C to +40° Operating Temperature Range • Very Low Standby Power • Over Voltage, Over Current, & Short Circuit Protection • MTBF: 50,000 Hours • Meets UL60950 and FCC Part 15 Standards • CEC & Energy Star Level V Compliant • US, EU, UK, AUS, & JP Interchangeable Plugs Available DESCRIPTION The WMICP48 series of Class II wall mount AC/DC power supplies delivers up to 48 Watts of output power in a 3.82” x 1.77” x 1.48” package. Single output models are available from 5VDC to 24VDC with an input voltage range of 90-264VAC. These supplies are protected against over voltage, over current, and short circuit conditions. The WMICP48 series is RoHS and CEC/ Energy Star Level V compliant. These supplies also meet UL60950 and FCC Part 15 regulatory standards. US, EU, UK, AUS, and JP interchangeable plugs are available for this series. MODEL SELECTION TABLE Model Number (1) WMICP2505U WMICP4509U WMICP3612U WMICP4812U WMICP3624U WMICP4824U WMICP2505K WMICP4509K WMICP3612K WMICP4812K WMICP3624K WMICP4824K WMICP2505E WMICP4509E WMICP3612E WMICP4812E WMICP3624E WMICP4824E WMICP2505A WMICP4509A WMICP3612A WMICP4812A WMICP3624A WMICP4824A WMICP2505J WMICP4509J WMICP3612J WMICP4812J WMICP3624J WMICP4824J Input Voltage Range 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC 90 ~ 264 VAC Output Voltage (2) 5 VDC 9 VDC 12 VDC 12 VDC 24 VDC 24 VDC 5 VDC 9 VDC 12 VDC 12 VDC 24 VDC 24 VDC 5 VDC 9 VDC 12 VDC 12 VDC 24 VDC 24 VDC 5 VDC 9 VDC 12 VDC 12 VDC 24 VDC 24 VDC 5 VDC 9 VDC 12 VDC 12 VDC 24 VDC 24 VDC Output Current (2) 5A 5A 3A 4A 1.5A 2A 5A 5A 3A 4A 1.5A 2A 5A 5A 3A 4A 1.5A 2A 5A 5A 3A 4A 1.5A 2A 5A 5A 3A 4A 1.5A 2A Ripple & Noise (3) 50mVp-p 90mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p 50mVp-p 90mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p 50mVp-p 90mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p 50mVp-p 90mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p 50mVp-p 90mVp-p 120mVp-p 120mVp-p 240mVp-p 240mVp-p Output Power 25W 45W 36W 48W 36W 48W 25W 45W 36W 48W 36W 48W 25W 45W 36W 48W 36W 48W 25W 45W 36W 48W 36W 48W 25W 45W 36W 48W 36W 48W Plug Type (1) United States United Kingdom Europe Australia Japan NOTES 1. The suffix in the model number represents the type of plug: “U” for United States type, “K” for United Kingdom type, “E” for Europe type, “A” for Australia type, and “J” for Japan type. 2. The output voltage and output current listed in the table above are for standard output models. Output voltages are available from 5VDC to 24VDC and output current is available from 100mA to 5000mA. Please call factory for ordering details. 3. Ripple and noise is measured at 20MHz limited bandwidth with 0.1µF ceramic and 10µF electrolytic capacitors across the output 4. Several output connector options are available. Please call factory for ordering details. 5. Interchangeable plugs are sold separately. Please call factory for ordering details. 03/31/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 WMICP48 SERIES Up to 48 Watts, AC/DC Wall Mount Power Supplies Rev B Wall Industries, Inc. TECHNICAL SPECIFICATIONS: WMICP48 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 100 90 47 115/230 115/230 50/60 240 264 63 1.3 30 75 0.5 Unit INPUT SPECIFICATIONS Rated input voltage range Full Range Input Voltage Input Frequency Input Current Inrush Current Stand-by Power At 90VAC/60Hz and full load At 100VAC and full load At 240VAC and full load At 230VAC/50Hz and no load VAC Hz A A W OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation Load Regulation Output Power Output Current Minimum Load Ripple & Noise (20MHz BW) Hold-Up Time Turn-on Time Output voltages available from 5VDC to 24VDC -10 -1 -0.5 Output power available up to 48 Watts Output current available from 100mA to 5000mA With 0.1µF ceramic and 10µF electrolytic capacitors in parallel 100VAC/60Hz and full load 100VAC/60Hz and full load See Table +10 +1 +0.5 See Table See Table 0 -1 10 +1 3 % % % mA % ms s PROTECTION Over Voltage Protection Over Current Protection Short Circuit Protection Output shut-down; Automatic recovery Output shut-down; Automatic recovery Output shut-down; Automatic recovery GENERAL SPECIFICATIONS Efficiency At 100~240VAC, 50/60Hz, full load Switching Frequency Dielectric Withstand Voltage (I/P to O/P) 10mA/60 sec Insulation (I/P to O/P) 500VDC 75 65 3000 10 % KHz VAC MΩ ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Cooling MTBF -20 -20 20 0 0.5% annual field failure rate at 25°C 40 75 90 90 Free air convection 50,000 °C °C % RH % RH hours PHYSICAL SPECIFICATIONS Dimensions (L x W x H) Weight AC Plug Output Connector Case Color 3.82 x 1.77 x 1.48 inches (97.0 x 45.0 x 37.6 mm) 8.75oz (248g) See “Model Number Setup” table on page 3 for suffix options US, UK, EU, AUS, JP plug types Several options available Several Pantone® color options available SAFETY Safety Approvals 03/31/2014 UL60950, FCC Part 15, SAA, CE, GS, C-Tick, PSE, BS1363, CB Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 WMICP48 SERIES Up to 48 Watts, AC/DC Wall Mount Power Supplies Rev B Wall Industries, Inc. MECHANICAL DRAWING Unit: inches (mm) 1.30 (33.0) 0 Ø4 8( .1) 1.18 (30.0) 0.057 (1.45) 0.56 (14.15) 1.77 (45.0) 0.25 (6.3) 3.82 (97.0) .5 Ø1 Ø0.156(Ø3.96) 0.26 (6.5) 0.54 (13.77) Ø0.125 (Ø3.18) 0.79 (20.0) 1.36 (34.6) 1.48 (37.6) 0.68 (17.15) 0.011 (0.27) 0.25 (6.39) Notes: 1. Interchangeable plugs are sold separately. Please call factory for ordering details. 2. United States, United Kingdom, Europe, Australia, and Japan plug types are available. 3. Several output connectors are available. Please call factory for ordering details. 4. Black case is standard; for other case colors please call factory. 5. All dimensions are for reference only. MODEL NUMBER SETUP WMICP Series Name 48 Output Power 24 Ouptut Voltage U (1) AC Plug Type 25: 25 Watts 05: 5 VDC U: United States 36: 36 Watts 09: 9 VDC K: United Kingdom 45: 45 Watts 12: 12 VDC E: Europe 48: 48 Watts 24: 24 VDC A: Australia J: Japan Notes 1. Output voltages are available anywhere from 5VDC to 24VDC. Please call factory for ordering details. 2. Several output connector options are available. Please call factory for ordering details. 03/31/2014 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Wall Industries, Inc. Rev B WMICP48 SERIES Up to 48 Watts, AC/DC Wall Mount Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 03/31/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Road Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4