DATA SHEET SKY66184-11: 2110 to 2170 MHz Linear Power Amplifier Applications 3G/4G LTE Band 1, 4, and 10 small cell VCC1 VEN VBIAS VCC3 Active distributed antenna system Cellular repeaters RFOUT Coupling Port Active Bias Driver amplifier RFIN Features Output Match Input Match Stage 1 PA Stage 2 PA High gain: 39.0 dB (unconditionally stable) High linearity: +23 dBm with –50 dBc ACLR @ 85°C (WCDMA Test Model 1 with 64 DPCH) RF input and output internally matched to 50 Excellent output return loss: < –17 dB Integrated active bias: performance compensated over temp PA On/Off function: 2.5 μs switching time Integrated coupler for output power monitoring Single supply voltage: 3.3 V Minimal external components Pin-to-pin compatible PA family supporting all 3GPP bands Small 5 x 5 mm, 28-pin package (MSL3, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Stage 3 PA RFOUT Stage 4 PA 203259-001 VCC2 Figure 1. SKY66184-11 Linear PA Block Diagram Description SKY66184-11 is a high-linearity power amplifier (PA) with fully matched input/output and high gain. The compact 5 x 5 mm PA is designed for FDD 3G/4G LTE small cell base stations operating from 2100 to 2200 MHz. The active biasing circuitry is integrated to compensate PA performance over temperature, voltage, and process variation as well as an internal coupler for power monitoring. The SKY66184-11 requires minimal external components and is part of a high-linearity, pin-to-pin compatible PA family supporting all 3GPP bands. A block diagram of the SKY66184-11 is shown in Figure 1. The device package and pinout for the 28-pin device are shown in Figure 2. Table 1 lists the pin-to-pin compatible parts in the PA family. Table 1. Pin-to-Pin Compatible PA Family Part Number Frequency (MHz) LTE Band SKY66180-11 790 to 821 20 SKY66181-11 1805 to 1880 3 SKY66182-11 2300 to 2400 30, 40 SKY66183-11 3400 to 3600 22, 42 SKY66184-11 2110 to 2170 1, 4, and 10 SKY66185-11 851 to 894 5, 6, 18, 19, 26, and 27 SKY66186-11 728 to 768 12, 13, 14, and 17 SKY66187-11 2620 to 2690 7 SKY66188-11 758 to 803 28 SKY66189-11 1930 to 1995 2, 25 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 1 GND VCC2 GND N/C VCC3 28 27 26 25 24 23 N/C VCC1 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER GND 1 22 21 GND GND 2 20 GND N/C 3 19 RFOUT RFIN 4 18 N/C N/C 5 17 N/C GND 6 16 GND VEN 7 15 GND 14 RFOUT_COUP 13 GND 12 N/C 11 GND 10 VBIAS 9 N/C N/C 8 203259D-002 Figure 2. SKY66184-11 Pinout (Top View) Table 2. SKY66184-11 Signal Descriptions Pin Name Description Pin Name Description 1 GND Ground 15 GND Ground 2 GND Ground 16 GND Ground 3 N/C No internal connection 17 N/C No internal connection 4 RFIN RF input 18 N/C No internal connection 5 N/C No internal connection 19 RFOUT RF output 6 GND Ground 20 GND Ground 7 VEN Enable (active low) 21 GND Ground 8 N/C No internal connection 22 N/C No internal connection 9 N/C No internal connection 23 VCC3 Output stage supply voltage 10 VBIAS Bias voltage 24 N/C No internal connection 11 GND Ground 25 GND Ground 12 N/C No internal connection 26 VCC2 Stage 2 PA supply voltage 13 GND Ground 27 GND Ground 14 RFOUT_COUP RF output coupling port 28 VCC1 Input stage supply voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Technical Description Electrical and Mechanical Specifications The SKY66184-11 PA contains all of the needed RF matching and DC biasing circuits. This three-stage device is optimized for high linearity and power efficiency. These features make the device suitable for wideband applications where PA linearity and power consumption are of critical importance (e.g., small cell and infrastructure applications). The absolute maximum ratings of the SKY66184-11 are provided in Table 3. The recommended operating conditions are specified in Table 4, and electrical specifications are provided in Table 5. Typical performance characteristics are shown in Figures 3 through 6. The device is designed for standard WCDMA and LTE modulated signals. Under these stringent test conditions, the device exhibits excellent spectral purity and power efficiency. Table 3. SKY66184-11 Absolute Maximum Ratings1 Parameter Symbol Supply voltage (VCC) VCC Minimum Maximum Units 0 +4.0 V Total supply current ICC 1400 mA Logic control input voltage (VEN) VEN –0.5 3.6 V Case operating temperature2 TC –40 +98 C Storage temperature TSTG –55 +150 C Junction temperature TJ +150 C Thermal resistance θJC 23 C/W Power dissipation PD 4.6 W Electrostatic discharge: ESD 500 150 V V Charged Device Model (CDM) Human Body Model (HBM) 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. 2 Case operating temperature (Tc) refers to the temperature of the bottom ground pad. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times. Table 4. SKY66184-11 Recommended Operating Conditions Parameter Symbol Minimum Frequency range f Supply voltage (VCC1, VCC2, VCC3)1 VCC 3.0 VENH VENL 2.5 0 Typical 2110 3.3 Maximum Units 2170 MHz 3.6 V 3.6 0.6 V V 3.0 mA +85 C PA enable control voltage (active low): Disable Enable PA enable current (@ PAEN = 3.6 V) IEN Case operating temperature TC +25 +40 1 Voltage levels measured at the pads of the package. The Evaluation Board supply voltage levels may be different. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 3 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Table 5. SKY66184-11 Electrical Specifications1 (VCC = +3.3 V, TC = +25 C, f = 2140 MHz, Characteristic Impedance [ZO] = 50 Ω, VEN = 0 V, Unless Otherwise Noted) Parameter Symbol Test Condition Gain G @ 23 dBm CW, POUT = +23 dBm Input return loss |S11| CW, PIN = –30 dBm Output return loss: |S22| CW, PIN = –30 dBm: In-band Out-of-band In-band frequency: 2.11 and 2.17 GHz Out-of-band frequency: 2.03 and 2.25 GHz Min Typical Max 38.0 39.0 dB 8 10 dB 12 10 17.5 14 dB dB Quiescent current ICQ No RF 400 460 mA Operating current ICC CW, POUT = +23 dBm 650 730 mA Power-down current IPD VEN = 2.5 V 1.5 2.5 mA Adjacent channel leakage ratio ACLR 5 MHz offset, WCDMA test model 1, with 64 DPCH, 8.5 dB PAR, POUT = +23 dBm –50 –47 dBc Output 1 dB compression point OP1dB CW (Gain compression less than 1dB reference to G@23dBm) +30.3 +31 Power added efficiency PAE CW @ POUT = +23 dBm 7.5 9.5 Output coupling factor CPLOUT POUT = +23 dBm, CW 19 21 dBm % 23 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 Units May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E dB DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Typical Performance Characteristics 35 42 30 40 25 PAE (%) 44 38 36 25 ˚C 40 ˚C 85 ˚C 30 9 11 13 20 15 15 17 19 21 23 25 27 29 31 203259D-004 32 25 ˚C 40 ˚C 85 ˚C 10 203259D-003 34 5 0 33 9 11 13 15 17 19 POUT (dBm) 32.0 –35 31.5 203259D-005 31.0 30.5 30 35 40 45 50 55 60 25 27 29 31 33 65 70 Temperature (°C) Figure 5. OP1dB vs Temperature 75 80 85 –40 25 ˚C 40 ˚C 85 ˚C –45 –50 203259D-006 ACLR (dBc) –30 25 23 Figure 4. PAE vs Output Power 32.5 30.0 21 POUT (dBm) Figure 3. Gain vs Output Power OP1dB (dBm) Gain (dB) (VCC = +3.3 V, Tc = +25 C, f = 2140 MHz, Characteristic Impedance [Zo] = 50 Ω, VEN = 0 V, Unless Otherwise Noted) –55 –60 20 21 22 23 24 25 POUT (dBm) Figure 6. ACLR vs Output Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 5 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Evaluation Board Description Application Circuit Notes The SKY66184-11 Evaluation Board is used to test the performance of the SKY66184-11 PA. A typical application schematic diagram is shown in Figure 7. A Bill of Materials for the SKY66184-11 Evaluation Board is listed in Table 6. An assembly drawing for the Evaluation Board is shown in Figure 8. The board layer detail is shown in Figure 9. The layer detail physical characteristics are shown in Figure 10. Center Ground. It is extremely important to sufficiently ground the bottom ground pad of the device for both thermal and stability reasons. Multiple small vias are acceptable and work well under the device if solder migration is an issue. GND (pins 1, 2, 6, 11, 13, 15, 16, 20, 21, 25, and 27). Attach all ground pins to the RF ground plane with the largest diameter and lowest inductance via that the layout allows. Multiple small vias are acceptable and work well under the device if solder migration is an issue. VBIAS (pin 10). The bias supply voltage for each stage, nominally set to +3.3 V. RFOUT (pin 19). Amplifier RF output pin (ZO = 50 Ω). The module includes an onboard internal DC blocking capacitor. All impedance matching is provided internal to the module. VCC1, VCC2, and VCC3 (pins 28, 26, and 23, respectively). Supply voltage for each stage collector bias is nominally set to 3.3 V. Bypass and decoupling capacitors C1, C2, C3, C4, C5, and C6 should be placed in the approximate location shown on the evaluation board assembly drawing, although exact placement is not critical. RFIN (pin 4). Amplifier RF input pin (Zo = 50 Ω). The module includes an onboard internal DC blocking capacitor. All impedance matching is provided internal to the module. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER J1 4 5 6 7 8 PAEN VBIAS VCC1 VCC2 VCC1 C3 0.1 μF C2 0.1 μF C1 10 μF C4 10 μF L1 0Ω VCC2 X VCC3 29 GND 8 Header C7 100 pF X C8 DNI X RFIN GND 2 GND 3 N/C 4 RFIN 5 N/C 6 GND 7 VEN SKY66184-11 N/C N/C VBIAS R2 0Ω C5 0.1 μF C6 10 μF 28 27 26 25 24 23 22 1 J3 VCC3 C12 DNI X GND N/C GND RFOUT_COUP 2 3 VCC1 GND VCC2 GND N/C VCC3 N/C 1 GND GND RFOUT N/C N/C GND GND 21 20 19 18 17 RFOUT J2 X X 16 15 8 9 10 11 12 13 14 R5 0Ω X X X PAEN RF Output Coupling Port J4 C10 0.1 μF C11 0.1 μF 203259D-007 VBIAS Figure 7. SKY66184-11 Application Schematic Table 6. SKY66184-11 Evaluation Board Bill of Materials (BOM) Quantity Component Size Part Number Description 3 C1, C4, C6 1206 C1206X7R160-106KNE Capacitor, 10 μF, 16 V, ±10%, X7R 5 C2, C3, C5, C10, C11 0402 GRM155R71C104KA88 Ceramic capacitor, 0.1 μF, 10%, X7R, 16 V 1 C7 0402 GRM1555C1H101JZ01J Capacitor, 100 pF, 50 V, 5%, COG/NPO 2 C8, C12 DNI DNI 1 L1 0603 RM73ZIJ000 Resistor, 0 Ω, 5% 2 R2, R5 0402 ERJ2GE0R00 Resistor, 0 Ω, jumper, 0.063 W Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 7 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER J1 C6 C4 C1 C5 L1 C12 C3 C2 RF In C8 RF Out U1 C7 C10 R2 R5 C11 RF Out Coupling Port Notes: 203259D-008 The C3 and C4 components are not required. Some of the other components shown are optional. Figure 8. SKY66184-11 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E 203259D-009 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Figure 9. SKY66184-11 Board Layer Detail Cross Section Name Thickness (mm) Material Top Solder Mask 0.010 Solder Resist L1 0.035 Cu – 1 oz Dielectric 0.250 Rogers RO4350B L2 0.035 Cu – 1 oz Dielectric 0.500 FR4 L3 0.035 Cu – 1 oz Dielectric 0.250 FR4 L4 0.035 Cu – 1 oz Bottom Solder Mask 0.010 Solder Resist 203259D-010 Figure 10. SKY66184-11 Layer Detail Physical Characteristics Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 9 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Package Dimensions The typical part marking is shown in Figure 11. Figure 12 shows the PCB layout footprint. Figure 13 shows the package dimensions, and Figure 14 provides the tape and reel dimensions. The SKY66184-11 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Package and Handling Information Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Pin 1 Indicator 66184-11 XXXXXXXXX YYWW CC 203259D-011 Skyworks Part Number Lot Code Date Code: YY = Calendar Year WW = Work Week CC = Country Code Figure 11. Typical Part Marking Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER 5.3 mm Pin 28 Package Outline 6X 1.25 mm Pin 1 Indicator 0.43 X 0.43 Pin 1 0.5 mm Pitch 5.3 mm 6X 1.25 mm 9X 1.1 mm 28X 0.55 mm Exposed Center Pad Stencil aperture size of 80% to 100% of the module/package solder mask openings 28X 0.25 mm 9X 1.1 mm Stencil Aperture Top View 5.4 mm 5.3 mm Package Outline Pin 28 0.25 mm Typ Pin 28 Package Outline Pin 1 Indicator 0.43 x 0.43 Pin 1 Pin 1 0.5 mm Pitch 0.5 mm Pitch 5.3 mm 5.4 mm 2X 1.8 mm 0.6 mm Pitch 17X 0.55 mm Thermal via array Ø0.3 mm on 0.6 mm pitch improves thermal performance 17X 0.25 mm 28X 0.65 mm Exposed Center Pad Opening size of 60% to 100% of exposed center opening shown 2X 1.8 mm 28X 0.35 mm 0.6 mm Pitch Notes: Metallization Top View Solder Mask Opening Top View 1. Thermal vias should be resin filled and capped in accordance with IPC–4761 type VII vias. 2. Recommended Cu thickness is 30 to 35 μm. 203259D-012 Figure 12. SKY66184-11 PCB Layout Footprint Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 11 28X SMT Pad 0.1 A B C Top 4X 1 B 4X 0.5 5 Pin 1 Indicator 4X 1.5 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Pin 28 0 C See Detail B Pin 1 Indicator See Detail C Pin 1 4X 1.5 4X 0.5 5 0 4X 1 6X 1.25 14X 2.4 0.2 A B C 0.1 Side View 14X 2.4 Solder Mask Opening 1.25 ± 0.1 0.075 A B C Top View 6X 1.25 A A Bottom View 0.35 ± 0.05 2X (0.05) 1.1 0.43 X 0.43 0.3 ± 0.1 1.1 (0.1) Detail A Pad Notes: 1. Dimensions are in millimeters. 2. Dimensions and tolerances according to ASME Y14.5M-1994. 1.1 Metal Pad Edge 0.25 ± 0.05 Scale: 2X 7X This Rotation 7X Rotated 180° 7X Rotated 90° CW 7X Rotated 90° CCW 5X R0.05 Max 4X R0.05 Max 1.1 Detail B Pad Scale: 2X 8X This Rotation Detail C Pad Scale: 2X 1X This Rotation Figure 13. SKY66184-11 Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E 203259D-013 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER 0.25 ± 0.20 Ø1. 50 2.00 ± 0.10 ±0 4.00 ± 0.10 1.75 ± 0.10 5.25 ± 0.10 5.50 ± 0.10 Pin 1 1.40 ± 0.10 8.00 ± 0.10 12.00 ± 0.20 .10 Ø1.50 ± 0.10 Notes: 1. Carrier tapes must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping. 2. Carrier tape shall be black conductive polycarbonate. 3. Cover tape shall be transparent conductive material. 4. ESD-surface resistivity shall be ≤ 1 × 1010 Ω/square per EJA, JEDEC TNR specification. 5. All measurements are in millimeters. 5.25 ± 0.10 203259D-014 Figure 14. SKY66184-11 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203259E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 11, 2016 13 DATA SHEET • SKY66184-11: 2110 TO 2170 MHz LINEAR POWER AMPLIFIER Ordering Information Model Name SKY66184-11: Linear PA Manufacturing Part Number SKY66184-11 Evaluation Board Part Number TW22-D110 Copyright © 2014-2016 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 May 11, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203259E