DATA SHEET SKY73032-11: 700 – 1000 MHz High Gain and Linearity Single Downconversion Mixer Applications Description x 2G/3G base station transceivers: GSM/EDGE, CDMA, UMTS/WCDMA, iDEN The SKY73032-11 is a fully integrated single mixer that includes Local Oscillator (LO) drivers, an LO switch, high linearity mixers, and large dynamic range Intermediate Frequency (IF) amplifiers. Low loss RF baluns have also been included to reduce design complications and lower system cost. x Operating frequency range: 700 to 1000 MHz x IF frequency range: 40 to 300 MHz x Conversion gain: 9.5 dB x Input IP3: +27.0 dBm x Output IP3: +36.5 dBm x Noise figure: 8.3 dB x Integrated LO drivers x Integrated low loss RF baluns x High linearity IF amplifiers x On-chip SPDT LO switch (greater than 40 dB LO-to-LO isolation) The SKY73032-11 is manufactured using a robust silicon BiCMOS process and has been designed for optimum long-term reliability. The SKY73032-11 single downconversion mixer is provided in a compact, 20-pin 5 x 5 mm Multi-Chip Module (MCM). A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. RXIF x Small, MCM (20-pin, 5 x 5 mm) Pb-free package (MSL3, 260 qC per JEDEC J-STD-020) VCC_IFRF Features The SKY73032-11 features an input IP3 of +27.0 dBm and a Noise Figure (NF) of 8.3 dB, making the device an ideal solution for high dynamic range systems such as 2G/3G base station transceivers. The LO switch provides more than 40 dB of isolation between LO inputs and supports the switching time required for GSM/EDGE base stations. IFA+ IFA– x Land mobile radio x ISM band transceivers x High performance radio links x RF identification Skyworks offers lead (Pb)-free RoHS (Restriction of Hazardous Substances) compliant packaging. LO1 RF LO2 LO_SEL VCC_LO S937 Figure 1. SKY73032-11 Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 1 RXIF IF+ IF– GND N/C DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER 20 19 18 17 16 2 14 GND N/C 3 13 GND GND 4 12 N/C GND 5 11 LO1 6 7 8 9 10 GND RF LO_SEL LO2 VCC_LOSW 15 N/C 1 VCC_LO VCC_IFRF S938 Figure 2. SKY73032-11 Pinout – 20-Pin MCM Table 1. SKY73032-11 Signal Descriptions Pin # Name Description 1 VCC_IFRF IF and RF DC supply, +5V 2 RF RF input 3 N/C No connection 4 GND Ground 5 GND 6 VCC_LO 7 N/C Pin # 11 Name Description LO1 LO1 input 12 N/C No connection 13 GND Ground 14 GND Ground Ground 15 LO2 LO2 input LO DC supply, +5V 16 N/C No connection No connection 17 GND Ground 8 VCC_LOSW LO switch DC supply, +5V 18 IF– Negative IF output 9 LO_SEL LO select switch control 19 IF+ Positive IF output 10 GND Ground 20 RXIF IF bias adjust Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Functional Description The SKY73032-11 is a high gain single mixer, optimized for base station receiver applications. The device consists of a low loss RF balun, high linearity passive mixer, and a low noise IF amplifier. An LO amplifier is also included that allow the SKY73032-11 to connect directly to the output of a Voltage Controlled Oscillator (VCO). This eliminates the extra gain stages needed by most discrete passive mixers. A Single Pole, Double Throw (SPDT) switch has been included to select between two different LO inputs (LO1 and LO2) for frequency hopping applications such as GSM. A high isolation SPDT switch allows the SKY73032-11 to be used for frequency hopping applications. This switch provides greater than 40 dB of LO1 to LO2 isolation: LO_SEL Input LO Path Selected High LO1 (pin 11) enabled Low LO2 (pin 15) enabled For applications that do not require frequency hopping, LO_SEL is fixed to one state and the appropriate LO input is used. An internal pull-down resistor enables the LO2 input. RF Baluns and Passive Mixer The RF baluns provide a single ended input, which can easily be matched to 50 : using a simple external matching circuit. The RF baluns offer very low loss, and excellent amplitude and phase balance. The high linearity SKY73032-11 is a passive, double balanced mixer that provides a very low conversion loss, and excellent 3rd Order Input Insertion Point (IIP3). Addtionally, the balanced nature of the mixer provides for high port-to-port isolation. IF Amplifier The SKY73032-11 includes high dynamic range IF amplifiers that follow the passive mixers in the signal path. The outputs require a supply voltage connection using inductive chokes. These choke inductors should be high-Q and have the ability to handle 200 mA or greater. A simple matching network allows the output ports to be matched to a balanced 200 : impedance. The IF amplifiers are optimized for IF frequencies between 40 and 300 MHz. The IF amplifiers can be operated outside of this range, but with a slight degradation in performance. LO Buffers and SPDT LO Switch The LO buffers allow the input power of the SKY73032-11 to be in the range of r6 dBm. The LO section is optimized for high-side LO injection. However, each of the two LOs can be driven over a wide frequency range with only slight degradation in performance. Electrical and Mechanical Specifications The absolute maximum ratings of the SKY73032-11 are provided in Table 2 and the recommended operating conditions in Table 3. Electrical characteristics for the SKY73032-11 are provided in Table 4. Typical performance characteristics for the SKY73032-11 are illustrated in Figures 3 through 19. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 3 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Table 2. SKY73032-11 Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units 4.5 5.5 V Supply voltage, +5 V VCC Supply current ICC 240 mA RF input power PRF +20.0 dBm LO input power PLO +20.0 dBm Operating case temperature TC +85 qC Junction temperature (Note 2) TJ +150 qC Storage case temperature TSTG +125 qC –40 –40 Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Note 2: Nominal thermal resistance (junction to center ground pad) is 5.1 qC/W. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY73032-11 Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum 4.75 5.00 5.25 Supply voltage, +5 V VCC Supply current ICC LO input power PLO –6.0 LO select input: high low LO_SELH LO_SELL 2.2 Operating case temperature TC RF frequency range LO frequency range (Note 1) IF frequency range FIF 210 0 V mA +6.0 dBm 0.8 V V –40 +85 qC FRF 700 1000 MHz FLO 900 1250 MHz 40 300 MHz Note 1: The SKY73032-11 has been optimized for high side LO injection. However, the LO can be used outside of the specified frequency range with degraded performance. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 Units August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Table 4. SKY73032-11 Electrical Specifications (Note 1) (VCC = +5 V, TA = +25 qC, LO = 0 dBm, RF Frequency = 900 MHz, IF Frequency = 200 MHz, LO Frequency = 1100 MHz, Unless Otherwise Noted) Parameter Conversion gain Symbol G Gain variation over temperature Noise Figure NF Noise Figure variation over temperature Test Condition Min Typical 8.2 9.5 dB TA = –40 to +85 °C ±0.6 dB TA = 25 °C, PLO = –3 to +3 dBm, VCC = 4.75 to 5.25 V, IF = 200 MHz 8.3 dB TA = –40 to +85 °C ±0.8 dB 18 dB +27.0 dBm TA = –40 to +85 °C ±0.3 dB dBm fRF = 824 to 915 MHz, TA = 25 °C, PLO = –3 to +3 dBm Noise Figure with a blocker signal NFBLK Blocking signal input power = +8 dBm Third order input intercept point IIP3 fRF = 900 MHz and 900.8 MHz, PRF = –10 dBm/tone, VCC = 4.75 to 5.25 V Input IP3 variation over temperature +24.7 Max Third order output intercept point OIP3 fRF = 900 MHz and 900.8 MHz, PRF = –10 dBm/tone, VCC = 4.75 to 5.25 V +36.5 2RF – 2LO 2x2 PRF = –10 dBm –68.5 –63 3RF – 3LO 3x3 PRF = –10 dBm –80 –70 Input 1 dB compression point IP1dB Output 1 dB compression point OP1dB +11.0 LO1-to-LO2 isolation RF to IF isolation 38 LO leakage: @ RF port @ IF port Units dBc dBc +13.3 dBm +22.8 dBm 40 dB 48 dB –59 –34 –42 –23 dBm dBm RF port input return loss ZIN_RF With external matching components 14 dB LO port input return loss ZIN_LO With external matching components 14 dB IF port output return loss ZOUT_IF With external matching components 14 dB Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated temperatures may reduce reliability of the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 5 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER 11.0 11.0 4.75 V 5.00 V 5.25 V 10.5 10.5 10.0 9.5 9.5 9.0 9.0 Gain (dB) Gain (dB) 10.0 8.5 8.0 8.5 8.0 7.5 7.5 7.0 7.0 6.5 6.5 6.0 –40 oC +25 oC +85 oC 6.0 824 839 854 869 884 899 914 824 839 854 RF Frequency (MHz) Figure 3. Gain vs Frequency and Supply Voltage 10.0 914 –40 oC +25 oC +85 oC 13 12 Noise Figure (dB) 9.5 9.0 8.5 8.0 7.5 11 10 9 8 7 7.0 6 6.5 5 6.0 4 824 839 854 869 884 899 914 824 839 854 RF Frequency (MHz) 869 884 899 914 RF Frequency (MHz) Figure 5. Gain vs Frequency and LO Power Figure 6. Noise Figure vs Frequency and Temperature 14 14 4.75 V 5.00 V 5.25 V 13 12 –3 dBm 0 dBm +3 dBm 13 12 Noise Figure (dB) 11 10 9 8 7 11 10 9 8 7 6 6 5 5 4 4 824 839 854 869 884 899 RF Frequency (MHz) Figure 7. Noise Figure vs Frequency and Supply Voltage 914 824 839 854 869 884 899 RF Frequency (MHz) Figure 8. Noise Figure vs Frequency and LO Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 899 14 –3 dBm 0 dBm +3 dBm 10.5 Gain (dB) 884 Figure 4. Gain vs Frequency and Temperature 11.0 Noise Figure (dB) 869 RF Frequency (MHz) August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E 914 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER 30 30 –40 oC +25 oC +85 oC 29 4.75 V 5.00 V 5.25 V 29 28 27 27 26 26 IIP3 (dBm) IIP3 (dBm) 28 25 24 25 24 23 23 22 22 21 21 20 20 824 839 854 869 884 899 914 824 839 854 RF Frequency (MHz) Figure 9. IIP3 vs Frequency and Temperature 899 914 18 –3 dBm 0 dBm +3 dBm 29 28 –40 oC +25 oC +85 oC 17 16 15 IP1dB (dBm) 27 IIP3 (dBm) 884 Figure 10. IIP3 vs Frequency and Supply Voltage 30 26 25 24 14 13 12 23 11 22 10 21 9 20 8 824 839 854 869 884 899 914 824 839 854 RF Frequency (MHz) 869 884 899 914 RF Frequency (MHz) Figure 11. IIP3 vs Frequency and LO Power Figure 12. IP1dB vs Frequency and Temperature 18 18 4.75 V 5.00 V 5.25 V 17 16 –3 dBm 0 dBm +3 dBm 17 16 15 IP1dB (dBm) 15 IP1dB (dBm) 869 RF Frequency (MHz) 14 13 12 14 13 12 11 11 10 10 9 9 8 8 824 839 854 869 884 899 RF Frequency (MHz) Figure 13. IP1dB vs Frequency and Supply Voltage 914 824 839 854 869 884 899 914 RF Frequency (MHz) Figure 14. IP1dB vs Frequency and LO Power Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 7 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER –55 55 –40 oC +25 oC +85 oC –59 51 –67 2RF - 2LO (dB) –40 oC +25 oC +85 oC 53 RF to IF Isolation (dB) –63 –71 –75 –79 –83 49 47 45 43 41 –87 39 –91 37 –95 35 824 839 854 869 884 899 914 824 839 854 RF Frequency (MHz) Figure 15. 2RF – 2LO vs Frequency and Temperature 884 –40 oC +25 oC +85 oC –35 LO to RF Leakage (dBm) –29 –31 –33 –35 –37 –39 –41 –43 –40 –45 –50 –55 –60 –65 –70 –75 –45 –80 824 839 854 869 884 899 914 RF Frequency (MHz) 824 839 854 869 884 –40 oC +25 oC +85 oC 47 44 41 38 35 32 29 26 23 20 839 854 869 914 Figure 18. LO to RF Leakage vs Frequency and Temperature 50 824 899 RF Frequency (MHz) Figure 17. LO to IF Leakage vs Frequency and Temperature LO1 to LO2 Isolation (dB) 914 –30 –40 oC +25 oC +85 oC –27 884 899 914 RF Frequency (MHz) Figure 19. LO1 to LO2 Isolation vs Frequency and Temperature Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 899 Figure 16. RF to IF Isolation vs Frequency and Temperature –25 LO to IF Leakage (dBm) 869 RF Frequency (MHz) August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Evaluation Board Description SKY73032-11, refer to the Package and Handling Information section of this Data Sheet. The SKY73032-11 Evaluation Board is used to test the performance of the SKY73032-11 downconversion mixer. An assembly drawing for the Evaluation Board is shown in Figure 20 and the layer detail is provided in Figure 21. 3. Skyworks recommends including external bypass capacitors on the VCC voltage inputs of the device. 4. Components L5 and L4 (see Figure 22) are high-Q, low loss inductors. These inductors must be able to pass currents in excess of 200 mA DC. Circuit Design Configurations 5. Components R7 and R8 (see Figure 22) allow for external adjustment of the IF amplifier bias points. To reduce the IF amplifier bias current, connect pin 20 to ground through external resistor R8. To increase the IF amplifier bias current, connect pin 20 to VCC through external resistor R7. For operation as specified in Tables 3 and 4, these resistors are not required. The following design considerations are general in nature and must be followed regardless of final use or configuration: 1. Paths to ground should be made as short and as low impedance as possible. 2. The ground pad of the SKY73032-11 provides critical electrical and thermal functionality. This pad is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the device. Therefore, design the connection to the ground pad to dissipate the maximum heat produced by the circuit board. For more information on soldering the A schematic diagram for the SKY73032-11 Evaluation Board is shown in Figure 22. J9 J5 C16 C15 C13 C14 R6 L3 R5 L2 C17 T2 R4 C18 C11 J8 R3 L5 L4 C12 R7 R8 C19 C10 C20 R1 J4 C2 C3 L1 U1 C1 C5 C7 C4 C6 R2 C8 J1 J3 C9 J2 Note: This Evaluation Board is used for several different Skyworks devices. Components C4, C6, C8, C9, C13, C15 through C19, R5, and L3 are not used for the device described by this Data Sheet. S939 Figure 20. SKY73032-11 Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 9 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Layer 1: Top – Metal Layer 2: Ground Layer 3: Power Plane Layer 4: Solid Ground Plane S940 Figure 21. SKY73032-11 Evaluation Board Layer Detail Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER R6 0Ω 3 L4 470 nH 4 T2 1 6 J5 C14 22 pF L5 470 nH VCC R4 0Ω L2 8.2 nH 2 R7 DNI R8 DNI × IF+ 16 N/C 17 IF– 18 RXIF C20 1 μF 19 GND 20 1 VCC 15 VCC_IFRF LO2 RF GND 2 C3 2.7 pF C2 15 nH C1 0Ω × 14 3 N/C 12 N/C GND 6 N/C VCC_LO GND 7 8 × 11 VCC_LOSW 5 R2 0Ω J3 GND 4 L1 3.3 pF J8 C10 33 pF 13 SKY73032 LO1 9 GND R1 0Ω LO_SEL J4 R3 0Ω C7 33 pF 10 × VCC J2 Element Jumper C5 33 pF VCC C6 12 pF Notes: Values for all components are subject to change for matching purposes. Some component labels may be different than the corresponding component symbol shown here. Component values, however, are accurate as of the date of this Data Sheet. S943 Figure 22. SKY73032-11 Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 11 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Package Dimensions THE SKY73032-11 is rated to Moisture Sensitivity Level 3 (MSL3) at 260 qC. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, PCB Design & SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Figure 23 shows the package dimensions for the 20-pin MCM, and Figure 24 provides the tape and reel dimensions. Package and Handling Information Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note, Tape and Reel, document number 101568. Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Pin 1 Indicator 5 4X 1.3 4X 0.65 0 5X 4.8 B C Pin 20 Pin 1 indicator (See Detail B) Pin 1 4X 1.3 4X 0.65 0 5X 4.8 5 A 20X SMT Pad 0.15 A B C Solder Mask Opening A 0.2 A B C 1.1 ± 0.1 0.15 A B C 0.1 Side View Top View Bottom View Solder Mask Edges 0.2 x 0.2 Metal Pad Edge 3 0.45 ± 0.05 0.3 ± 0.03 (0.1) 0.45 ± 0.1 Detail A 3X R0.2 3 Detail B All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Figure 23. SKY73032-11 20-Pin MCM Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E S944 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER 8.00 (P1) ∅1.55 ± 0.05 4.00 (P0) 2.00 ± 0.05 0.30 ± 0.05 B 1.75 ± 0.10 5.35 A 5o Max. 12.00 ± 0.30 A 5.50 ± 0.05 Pin #1 Indicator B ∅1.50 Min. 1.70 5.35 B 5o Max. Notes: 1. Carrier tape: black conductive polystyrene 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.3 mm width 4. ESD surface resistivity is </=1 x 1010 Ohms/Square according to EIA, JEDIC TNR specification. 5. P0/P1 10 pitches cumulative tolerance on tape: ±0.20 mm 6. A and B measurement points are 0.30 mm from bottom pocket. 7. All dimensions are in millimeters A S461 Figure 24. SKY73032-11 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200625E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 24. 2009 13 DATA SHEET • SKY73032-11 DOWNCONVERSION MIXER Ordering Information Model Name SKY73032-11 700-1000 MHz Downconversion Mixer Manufacturing Part Number SKY73032-11 (Pb-free package) Evaluation Kit Part Number TW16-D770 Copyright © 2007, 2008, 2009 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 August 24. 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200625E