AS195_306LF_200187D.pdf

DATA SHEET
AS195-306LF: PHEMT GaAs IC High-Power
SP5T Switch 0.1 to 2 GHz
AN T
Applications
 2G/3G cellular infrastructure
V5
GND
GND
CBL
Features
 Five symmetric RF paths
 Positive voltage control
J1
CBL
 High IP3
 Excellent harmonic performance
J2
CBL
CBL
V1
GND
V2
GND
CBL
V4
GND
V3
 Handles GSM power levels
 Available in a small, low-profile QFN-16 (4 x 4 mm) package
(MSL1 @ 260 °C per JEDEC J-STD-020)
J5
J4
200187-001
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
J3
CBL
Figure 1. Functional Block Diagram and Pinout
of the AS195-306LF
Description
The AS195-306 is a reflective SP5T switch. It is an ideal switch
for higher power applications. It can be used for GSM dual-band
handset applications where low loss, low current and small size
are critical parameters.
Figure 1 shows the block diagram and pinout for the
AS195-306LF.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200187D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 7, 2016
1
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
Electrical and Mechanical Specifications
The absolute maximum ratings of the AS195-306LF are shown in
Table 2. Recommended operating conditions of the AS195-306LF
are provided in Table 3. The electrical specifications are provided
in Table 4. Table 5 shows the electrical specifications for nominal
operating conditions.
Figures 2, 3, and 4 show the typical performance characteristics
for the AS195-306.
Table 2. AS195-306LF Absolute Maximum Ratings
Parameter
Minimum
Typical
RF input power
Maximum
Units
+36 dBm, f > 500 MHz,
+27 dBm < 500 MHz, 0/8 V control
100 mW, f ≤ 500 MHz
Control voltage
–0.2
8
V
Operating temperature
–40
+85
°C
Storage temperature
–65
+150
°C
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This
device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industrystandard ESD handling precautions should be used at all times.
Table 3. AS195-306LF Recommended Operating Conditions
Parameter
Condition
Minimum
Typical
Maximum
Units
Switching characteristics:
Rise, fall
On, off
Video feedthru
IP3
nd
rd
2 and 3 harmonics
10/90%, RF
50% CTL to 90/10% RF
TRISE = 1 ns, BW = 500 MHz
50
100
50
ηs
ηs
mV
+13 dBm/tone
55
dBm
+ 34 dBm input 900 MHz
–65
dBc
25
°C/W
0
3
V
V
Thermal resistance
Control voltages
VLOW
VHIGH
Control current
IDD @ VHIGH = 3 V
200
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
June 7, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200187D
μA
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
Table 4. AS195-306LF Electrical Specifications
(TA = +25°C, VLOW = 0 V, VHIGH = 3 V, Z0 = 50 Ω, Unless Otherwise Specified)
Parameter
Symbol
Conditions
Insertion loss
Ant to J1, J2, J3, J4, J5
0.1 to 0.5 GHz
0.5 to 1.0 GHz
1.0 to 2.0 GHz
Isolation
Ant to J1, J2, J3, J4, J5
0.1 to 0.5 GHz
0.5 to 1.0 GHz
1.0 to 2.0 GHz
Min
30
25
21
Max
Units
0.5
0.6
1.0
0.7
0.8
1.1
dB
dB
dB
35
27
23
dB
dB
dB
1.4:1
1.6:1
0.1 to 1.0 GHz
1.0 to 2.0 GHz
VSWR
Typ
Table 5. AS196-306LF Truth Table1
V1
V2
V3
V4
V5
ANT-J1
ANT-J2
ANT-J3
ANT-J4
ANT-J5
VHIGH
0
0
0
0
Insertion loss
Isolation
Isolation
Isolation
Isolation
0
VHIGH
0
0
0
Isolation
Insertion loss
Isolation
Isolation
Isolation
0
0
VHIGH
0
0
Isolation
Isolation
Insertion loss
Isolation
Isolation
0
0
0
VHIGH
0
Isolation
Isolation
Isolation
Insertion loss
Isolation
0
0
0
VHIGH
Isolation
Isolation
Isolation
Isolation
Insertion loss
1 All other conditions not recommended.
“0” = 0 to 0.2 V.
“VHIGH” = 2.7 to 5 V.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200187D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 7, 2016
3
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
0
0
-0.2
-5
-10
J4
Isolation (dB)
J3
J1
-0.6
J2
-0.8
-1.0
-1.2
-1.4
-1.6
0
0.5
1.0
1.5
2.0
-15
-20
-25
J4
-30
-35
J2
-40
-45
J1
-50
2.5
0
0.5
Frequency (GHz)
1.0
1.5
2.0
Figure 3. Typical Isolation (All Paths) vs Frequency
2.0
1.9
1.8
1.7
VSWR
2.5
Frequency (GHz)
Figure 2. Typical Loss (All Paths) vs Frequency
J5
1.6
1.5
1.4
J4
1.3
200187-004
J3
1.2
J2
1.1
J1
1.0
0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Figure 4. VSWR vs Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
J5
J3
200187-003
J5
-0.4
200187-002
Insertion Loss (dB)
Typical Performance Characteristics
(Z0 = 50 Ω, Unless Otherwise Specified)
June 7, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200187D
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
Package Dimensions
Package and Handling Information
The typical part marking for the AS195-306LF is shown in
Figure 5. Package dimensions are shown in Figure 6.
Instructions on the shipping container label regarding exposure
to moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The AS195-306LF is rated to Moisture Sensitivity Level 3
(MSL3) at 260 C. It can be used for lead or lead-free soldering.
For additional information, refer to the Skyworks Application
Note, Solder Reflow Information, document number 200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format. For more information, refer to the Discrete
Devices and IC Switch/Attenuators Tape and Reel Package
Orientation application note.
Pin 1
Indicator
Skyworks
Part Number
Lot Code
Date Code:
Y = Calendar Year
WW = Work Week
200187-005
Figure 5. Typical Part Marking
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200187D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 7, 2016
5
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
-CSeating Plane
-A-
(0.2)
4.00
0.02 +0.03
–0.02
-B-
Pin 1 Indicator
Exposed Pad
2.15 +0.1
–0.15
(1.075)
Option B
Pin 1 Indicator
Option A
Pin 1 Indicator
2.15 +0.1
–0.15
4.00
(1.075)
2X
0.20 Min
16X
0.15 C
Scale: 10X
2X
Detail B
0.9 ± 0.1
0.15 C
0.10 C
R0.12 Typ
0.08 C
16X
Scale: 10X
R0.20
Pin 1 Indicator
0.18
4
0.345
0.18
0.55 ± 0.1
0.345
(0.325)
0.30 ± 0.05
0.10 C A B
0.65
Detail B
Scale: 20X
Even terminal side
Option A
Pin 1 Indicator
Scale: 10X
Option B
Pin 1 Indicator
Scale: 20X
Detail C
Scale: 40X
16 Places
Notes:
1. All measurements are in millimeters.
2. Dimensions and tolerances according to ASME Y14.5M-1994.
3. Coplanarity applies to the exposed heat sink slug as well as the terminals.
4. Plating requirement per source control drawing (SCD) 2504.
5. Package may have Option A or Option B pin 1 indicator.
200187-006
Figure 6. AS195-306LF Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
June 7, 2016 • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • 200187D
DATA SHEET • AS195-306LF: PHEMT GAAS IC HIGH-POWER SP5T SWITCH 0.1 TO 2 GHz
Ordering Information
Model Name
AS195-306LF: PHEMT GaAs IC High-Power SP5T Switch 0.1 to 2 GHZ
Manufacturing Part Number
AS195-306LF
Copyright © 2002-2007, 2016 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200187D • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice • June 7, 2016
7