Schottky Barrier Rectifier MBRF1060CTL 2x 5A, 60V, ITO-220AB Common Cathode MBRF1060CTL Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out Heat sink n de RoHS • H igh junction temperature capability Common Cathode • H igh frequency operation • C ommon cathode configuration in electrically isolated ITO220AB package • G uard ring for enhanced ruggedness and long term reliability 1 3 2 1 Anode Common Anode Cathode 2 • Low forward voltage drop 3 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications • S witching mode power supply Pinout 3 ITO-220AB Common Cathode • DC/DC converters • Polarity protection diodes • F ree-wheeling diodes Maximum Ratings Heat sink Cathode Cathode Parameters Symbol Peak Inverse Voltage VRWM 10 (total device) 125 Average Cathode 1 Forward Anode Current 2 Peak One Cycle Non-Repetitive Surge Current (per leg) Pinout 5 TO-220AC Test Conditions Max Unit - 60 V IF(AV) 50% duty cycle @TC = 75°C, rectangular wave form 5 (per leg) IFSM 8.3ms,half Sine pulse A A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.60 VF2 @ 5A, Pulse, TJ = 100 °C 0.55 IR1 @VR = rated VR TJ = 25 °C 1.0 IR2 @VR = rated VR TJ = 100 °C 15 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 220 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle <2% ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF1060CTL 2x 5A, 60V, ITO-220AB Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ Test Conditions -55 to +125 °C -55 to +125 °C Storage Temperature Tstg Maximum Thermal Resistance Junction to Case (per leg) RthJC DC operation 3.5 °C/W Maximum Thermal Resistance Case to Heat Sink RthJS DC operation 60 °C/W Approximate Weight wt 2 g Case Style ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF1060CTL 2x 5A, 60V, ITO-220AB Common Cathode Dimensions- ITO-220AB Symbol Packing Options Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 e - 2.55 - e1 - 5.10 - H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 øP1 øP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 θ1 θ2 θ3 θ4 θ5 - 5° - - 4° - - 10° - - 5° - - 5° Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF1060CTL MBRF1060CTL 50pcs / Tube 1000 Tube Specification MBRF1060CTL 6 7mm LF YYWWL MBR F 10 60 CTL LF YY WW L = Device Type = Package Type = Forward Current (10A) = Reverse Voltage (60V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15