wnmp1232.pdf

Model # WNMP1232
Available as:
WNMP1232, 10 Pin 0.625” Sq. Surface Mount (SG4)
BXMP1232, SMA Connectorized Housing (H1L)
RF/Microwave Amplifier
Features
• High Output Power: 1 Watt
• No External Circuitry Needed
• RoHS Compliant Model WNMP1232LF Available
• Unconditionally Stable
• EAR99
Typical Intermodulation
Performance at 25 ºC
Technical Specifications
Characteristic
TYPICAL
Ta = +25 ºC
MIN/MAX
Ta = -55ºC to +85 ºC
Frequency
200 – 500 MHz
200 – 500 MHz
Gain (dB)
19
17.5 Min.
Power @ 1 dB Comp. (dBm)
+30
+28.5 Min.
Reverse Isolation (dB)
-30
--
In
1.5:1
2.0:1 Max.
Note:
Intercept Values Measured at 500 MHz.
Out
1.5:1
2.0:1 Max.
Noise Figure (dB)
2.0
3.0 Max.
Absolute Maximum
(No Damage) Ratings
Power
Vdc
+15
+15
Operating Temperature
-55ºC to +100 ºC
mA
180
200 Max.
Storage Temperature
-62ºC to +125ºC
Case Temperature
+125 ºC
DC Voltage
+18 Volts
Continuous
RF Input Power
+18 dBm
Short Term
RF Input Power
200 Milliwatts
(1 Minute Max.)
Maximum Peak Power
0.5 Watt
(3 µsec Max.)
VSWR
1) Care should always be taken to effectively ground the case of each unit
2) Typical values are measured at 25°C, but not guaranteed.
3) Package drawings below are for reference only.
Second Order Harmonic
Intercept Point:
+52 dBm (Typ.)
Second Order Two Tone
Intercept Point:
+48 dBm (Typ.)
Third Order Two Tone
Intercept Point:
+38 dBm (Typ.)
Rev Date: 1/22/2014
© API Technologies Corp. Proprietary Information
Page # 1
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]
Model # WNMP1232
Typical Performance Graphs
Rev Date: 9/23/2015
© API Technologies Corp. Proprietary Information
Page # 2
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]
Model # WNMP1232
Instructions
Grounding Instructions
Care should be taken to effectively ground each unit.
Revisions
API reserves the right to make revisions to both product and/or the information contained within their
datasheets without advanced notice.
Min./Max. Values
Specifications are guaranteed when tested in a 50 Ω (ohm) system.
Typical performance graphs and values are measured at 25°C, but not guaranteed.
1) Outlines drawings below are for reference only.
Rev Date: 9/23/2015
© API Technologies Corp. Proprietary Information
Page # 3
|
www.apitech.com
|
micro.apitech.com
|
+1.888.553.7531
|
[email protected]