Waterproof ExStik® II Dissolved Oxygen Meter/Kit Easy to replace screw on membrane cap For fast replacement and operation. Extension cable and weighted probe guard included with the Kit Features: • Convenient kit adds versatility on measuring Dissolved Oxygen in laboratories or out in the field with a 16ft (5m) extension cable and probe weight guard for taking easy measurements in tanks or streams • Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00ppm (mg/L) • Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments) • Adjustable Salinity Compensation from 0 to 50ppt • Analog bargraph indicates trends • Memory stores up to 25 data sets with DO and Temperature reading • Self calibration on power up • Data Hold, Auto power off, Low battery indicator • Waterproof to IP57 • Optional 3 ft (1m) or 16ft (5m) extension cable with probe weight. • DO600 meter includes DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap. See image on right for DO600-K Kit information. Sample testing with extension cable attached to meter Sample testing with the meter in a laboratory environment Choice of optional 3ft (1m) or 16ft (5m) extension cable with probe weight Extension cable attached to meter Bonded membrane cap for easy replacement DO603 Membrane Kit includes 6 screw on membrane caps, 15mL filling solution and polishing paper DO600-K — Kit includes DO600 meter, DO603 membrane kit, 16ft (5m) extension cable, weighted probe guard, and hard carying case — $125 savings Specifications DO (saturation mode) DO (concentration mode) Temperature Dimensions Weight Range Max Resolution 0 to 200.0% 0.1% 0 to 20.00ppm (mg/L) 0.01ppm (mg/L) 32 to 122°F (0 to 50°C) 0.1°F/°C ±1.8°F (1°C) 1.4x6.9x1.6" (36x176x41mm) 3.8oz (110g) Basic Accuracy ±2% FS 0.4ppm (mg/L) Ordering Information: DO600 ..............ExStik® II Dissolved Oxygen Meter DO600-K ..........ExStik® II Dissolved Oxygen Kit DO610 ..............ExStik® II DO/pH/Conductivity Kit DO603 ..............Membrane Kit for DO600 and DO605 DO605 ..............Spare ExStik® II Dissolved Oxygen Electrode module EX010 ..............Extension Cable, 3ft (1 Meter) with probe weight for ExStik EX050 ..............Extension Cable, 16ft (5 Meter) with probe weight for ExStik CA895 ..............Carrying case, Small with Belt Loop CA903 ..............Carrying case for ExStik™ kit www.extech.com Specifications subject to change without notice. 6/2/08 - R1 Copyright © 2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.